Canon printer PIXMA MG7520 User Manual

							How to Detach / Attach the Disc TrayDetaching the disc traySlide the disc tray to the side on the back of the cassette 1 and raise it to detach.
Important
•
Be sure to remove all orange shipping tapes on the disc tray.
Attaching the disc tray
Align the holes of the disc tray with the hooks on the back of the cassette 1 and slide it to attach.
Important
•
Be sure to align each hole of the disc tray with its corresponding hook on the back of the cassette 1. If the disc tray is not attached properly, the disc tray may be damaged during insertion of the cassette
1 into the machine.
191 
						

							Loading Originals
Loading Originals on the Platen Glass
How to Load Originals for Each Function
Originals You Can Load
How to Detach / Attach the Document Cover
192 
						

							Loading Originals on the Platen Glass1.
Load an original on the platen glass.
1.
Open the document cover.
2.
Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass.
Originals You Can Load
How to Load Originals for Each Function
Important
•
Be sure to observe the following when loading the original on the platen glass.
•
Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
•
Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down
the original.
Failure to observe the above may cause the scanner to malfunction or the platen glass to break.
2.
Close the document cover gently.
Important
•
After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan.
193 
						

							How to Load Originals for Each FunctionLoad the original in the correct position according to the function to use. If you do not load the original
correctly, it may not be scanned properly.
Loading the Original to Be Aligned with the alignment mark •
Load originals to copy
•
In  Scan ,
◦
select  Auto scan  for Doc.type  to scan text documents, magazines, or newspapers
◦
select Document  or Photo  for Doc.type  and specify a standard size (A4, Letter, etc.) for  Scan
size  to scan originals
•
With a software application on a computer,
◦
scan text documents, magazines, or newspapers
◦
select a standard size (A4, Letter, etc.) to scan originals
Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass and align it with the alignment mark 
. Portions placed on the diagonally striped area cannot be scanned.
Important
•
The machine cannot scan the striped area (A) (0.04 inch (1 mm) from the edges of the platen glass).
Loading Only One Original in the Center of the platen glass
•
Scan only one disc in Copy label to disc label
•
Scan only one printed photo in  Photo copy
•
In Scan ,
◦
select  Auto scan  for Doc.type  to scan one printed photo, postcard, business card, or disc
194 
						

							◦select Photo for Doc.type  and specify  Auto scan for Scan size  to scan one original•
Scan one printed photo, postcard, business card, or disc with a software application on a computer
Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped
area cannot be scanned.
Loading Two or More Originals on the platen glass
•
Scan two or more printed photos in  Photo copy
•
In Scan ,
◦
select  Auto scan  for Doc.type  to scan two or more printed photos, postcards, or business cards
◦
select Photo for Doc.type  and specify  Auto multi scan  for Scan size  to scan two or more
originals
•
Scan two or more printed photos, postcards, or business cards with a software application on a computer
Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.4 inch (1 cm) or more space
between the edges (diagonally striped area) of the platen glass and the originals, and between the
originals. Portions placed on the diagonally striped area cannot be scanned.
You can place up to 12 items.
(A) More than 0.4 inch (1 cm)
Note
•
The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot
be corrected.
•
Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.
195 
						

							Originals You Can LoadItemDetailsTypes of originals- Text document, magazine, or newspaper
- Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.)Size (width x height)Max. 8.5 x 11.7 inches (216 x 297 mm)
Note
•
When loading a thick original such as a book on the platen glass, you can load it by removing the document cover from the machine.
How to Detach / Attach the Document Cover
196 
						

							How to Detach / Attach the Document CoverDetaching the document cover:Hold up the document cover vertically and then tip it back.
Attaching the document cover: Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover
vertically as illustrated below.
197 
						

							Inserting the Memory Card
Before Inserting the Memory Card
Inserting the Memory Card
Removing the Memory Card
198 
						

							Before Inserting the Memory CardThe following types of memory cards and image data are compatible with the machine.
Important
•
If you took and saved photos on a type of memory card that does not guarantee the operation on yourdigital camera, the image data may be unreadable on the machine or damaged. For information on
memory cards that your digital camera guarantees operation, refer to the instruction manual supplied
with your digital camera.
•
Format the memory card with a digital camera compliant with the Design rule for Camera File system
(Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). The memory card may not be
compatible with the machine if it is formatted on a computer.
Memory Cards that Do Not Require a Card Adapter
•
SD Secure Digital memory card, SDHC memory card
•
Memory Stick Duo, Memory Stick PRO Duo
Memory Cards that Require a Card Adapter
Important
•
Be sure to attach the special card adapters to the following memory cards before inserting to the card slot.
If one of the following memory cards is inserted without the card adapter, you may not be able to
remove the memory card.
Cannot Remove a Memory Card
•
miniSD Card, miniSDHC Card
Use the special "SD Card Adapter".
•
microSD Card, microSDHC Card
Use the special "SD Card Adapter".
•
Memory Stick Micro
Use the special Duo size adapter.
199 
						

							Printable Image Data
•
This machine accepts images taken with a camera compliant with the Design rule for Camera Filesystem (Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). Other image or movie types
such as RAW images cannot be printed.
•
The machine accepts images scanned and saved with the machine when  Doc.type is set to Photo
and  Format  is set to  JPEG (file extension ".jpg").
Note
•
This device incorporates exFAT technology licensed from Microsoft.
200