Canon printer PIXMA MG7720 User Manual

							1688Cause
The ink has run out. (The lamp on the ink tank flashes.)
What to DoReplace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Touch the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation
of printing under the ink out condition.
Note

						

							1689Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
What to DoReplace the ink tank and close the operation panel.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the machine.
If you want to continue printing, you need to disable the function for detecting the remaining ink level. To
disable this function, touch the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition or by using refilled ink tanks.
Note

						

							1700Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1083 
						

							1701Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1084 
						

							1710Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1085 
						

							1711Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1086 
						

							1730Cause
The ink tank may be an ink tank that ran out of genuine Canon ink or a counterfeit Canon ink tank.
What to Do
To print, you must replace the ink tank or disable the function for detecting the remaining ink level. To disable the function for detecting the remaining ink level, touch the printer's  Stop button for at least 5
seconds, and then release it.
By this operation, the fact that you have disabled the function for detecting the remaining ink level will be memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by
continuation of printing under the ink out condition or by using refilled ink tanks.
Note

						

							1731Cause
Non-genuine Canon ink tank has been detected.
What to DoTo print, you must replace the ink tank or disable the function for detecting the remaining ink level. Todisable the function for detecting the remaining ink level, touch the printer's  Stop button for at least 5
seconds, and then release it.
By this operation, the fact that you have disabled the function for detecting the remaining ink level will be
memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by
using a non-genuine Canon ink tank.
Note

						

							1750Cause
Appropriate ink tank is not installed.
What to DoPrinting cannot be executed because the ink tank is not compatible with this machine.
Install the appropriate ink tank.
If you want to cancel printing, touch the machine's  Stop button.
1089 
						

							1830Cause
A certain period of time has elapsed while disc label printing is in progress.
What to Do
If a certain period of time has elapsed while disc label printing is in progress, the machine stops initializing.
To resume initializing, tap  OK on the touch screen.
Try the operation again following the instructions on the touch screen.
1090