Canon printer PIXMA MG7720 User Manual

							PictBridge (Wireless LAN) Print Settings
Settings on PictBridge (Wireless LAN) Compliant Device
Settings on MachineSettings on PictBridge (Wireless LAN) Compliant Device
This section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction
manual.
Note

						

							*2 With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark
allows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specified data (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliantdevices.)
*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand
PictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.)Print date &
file no.Default (Off: No printing), Date, File No., Both, OffImage
optimizeDefault (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye correction*2
*1 The scene or person's face of a shot photo is recognized and the most suitable correction for each
photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitablecolor, brightness, or contrasts automatically to print.
*2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May not be selected depending on the device.)TrimmingDefault (Off: No trimming), On (follow the camera's setting), Off
Settings on Machine
You can change the PictBridge (Wireless LAN) print settings from the  PictBridge print settings screen.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
This section describes the procedure to display the  PictBridge print settings screen.
1.
Make sure machine is turned on.
2.
Flick HOME screen and tap  Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap PictBridge print settings .
5.
Check message that is displayed and tap  OK.
6.
Tap  Photo print setting .
The  PictBridge print settings  screen is displayed.
For more on the setting items:
PictBridge print settings
642 
						

							Note
						

							Paper SettingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
Note

						

							Note
						

							Check the message and tap OK. When the screen to select the operation is displayed, select one of the
operations below.
Note

						

							Copying
Making Copies Basics
 
Reducing/Enlarging CopiesTwo-Sided Copying
 
Special Copy MenuCopying from Smartphone/Tablet
648 
						

							Making CopiesThis section describes the procedure to copy with  Copy.1.
Make sure machine is turned on.
2.
Load paper.
3.
Flick HOME screen and tap  Copy .
Using the Operation Panel
The Copy standby screen is displayed.
4.
Load original on platen glass.
5.
Specify settings as necessary.
A.
The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B.
Tap to specify the number of copies.
1.
Flick to specify the number of copies.
2.
Tap to specify the number of copies.
If you keep touching here, the number scrolls by 10.
C.
Tap to display the print setting items.
649 
						

							For more on the setting items:
Setting Items for Copying
D.
Tap to preview an image of the printout on the preview screen.
For details:
Displaying Preview Screen
E.
Tap to specify the page size.
6.
Touch Color button for color copying, or  Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass after copying is complete.
Important