Canon printer PIXMA MG7720 User Manual

							Loading EnvelopesYou can load Envelope DL and Envelope Com 10 in the cassette 2.
The address is automatically rotated and printed according to the envelope's direction by specifying with the
printer driver properly.
Important

						

							3.
Slide the paper guide (A) in front and (B) on the right to open the guides.
4.
Load the envelopes WITH THE ADDRESS SIDE FACING DOWN, and place them in the
center of the cassette 2.
The folded flap of the envelope will be faced up on the left side.
C: Rear side
D: Address side
Up to 10 envelopes can be loaded at once.
Note

						

							5.
Align the paper guide (A) in front with the envelopes.
6.
Slide the paper guide (B) on the right to align the right and left guides with both sides of the
envelopes.
Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.
Note

						

							8.
Select the size and type of the loaded envelopes in the cassette 2 at Page size and Type ,
then tap  Register .
Paper Settings
9.
Holding both sides of the paper output tray (H), gently open it.
The output tray extension opens automatically when the paper output tray is opened.
10.
Extend the paper output support (I).
Note

						

							Placing a Printable Disc
Cautions When Printing on a Printable Disc
Before Placing a Printable Disc
Placing a Printable Disc
Removing a Printable Disc
How to Detach / Attach the Disc Tray
185 
						

							Cautions When Printing on a Printable Disc
						

							Before Placing a Printable DiscThe following items are needed to print onto the printable disc:
						

							Placing a Printable DiscTo print onto a printable disc, place it on the disc tray supplied with the machine, then insert it into the
machine.
This procedure also applies to printing from a computer.
Important

						

							5.
Place the disc tray on the disc tray guide.
Note

						

							Removing a Printable Disc1.
Pull out the disc tray.
2.
Close the disc tray guide.
Important