Canon printer PIXMA MG7720 User Manual

							The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screenappears. In that case, skip ahead to Step 3.2.
In the notification area on the desktop, right-click  (IJ Network Scanner Selector EX),
then select  Settings....
The Scan-from-PC Settings screen appears.
3.
Select your scanner or printer from  Scanners.
Normally, the MAC address of your scanner or printer is already selected after the network setup. In
that case, you do not need to select it again.
Important

						

							Important
						

							If your scanner or printer still does not appear, refer to "Network Communication Problems" for your
model from Home of the  2QOLQH0DQXDO.
863 
						

							Scanning from Computer (Mac OS)
Using IJ Scan Utility
Using Scanner Driver
Scanning Tips
Positioning Originals (Scanning from Computer)
Network Scan Settings
864 
						

							Scanning from Operation Panel
Forwarding Scanned Data to Computer Using Operation Panel Basics
Attaching Scanned Data to E-mail Using Operation Panel
Setting Items for Scanning Using Operation Panel
Setting Up Operation Panel with IJ Scan Utility (Windows)
Setting Up Operation Panel with IJ Scan Utility (Mac OS)
865 
						

							Forwarding Scanned Data to Computer Using Operation PanelBefore forwarding scanned data to the computer, check the following:
						

							Go to step 3.
Note

						

							Note
						

							DocumentScans the original on the platen glass as a document data applying the settings specified inScan settings .
Photo Scans the original on the platen glass as a photo data applying the settings specified in  Scan
settings .B.
Tap to display  Scan settings screen.
For more on the setting items:
Setting Items for Scanning Using Operation Panel
C.
Tap to display how to load the original.
D.
Tap to display the screen to select the destination.
4.
Load original on platen glass.
5.
Touch  Color button for color scanning, or  Black button for black & white scanning.
Note

						

							If program selection screen appears (Windows):