Canon printer PIXMA MG7720 User Manual

							Color Settings TabOn the  Color Settings  tab, you can specify the following settings.
Color Adjustment
Select one of the following.
Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
normally select this setting.
Color Matching Select this to automatically match the scanner, monitor, and color printer colors, thus reducing time andtrouble to manually match the monitor and printer colors.
Source(Scanner) Select scanner profile.
Target Select target profile.
Monitor Select this checkbox to display preview image with optimum correction for monitor.
Defaults Returns to the default  Color Matching settings.
Note

						

							Note
						

							Positioning Originals (Scanning from Computer)Learn how to place items on the platen or ADF (Auto Document Feeder) of your scanner or printer. Placeitems correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.
Important

						

							the platen may be saved as PDF files. To save in a
format other than PDF, scan by specifying the data
format.
Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges
(diagonally striped area) of the platen and items, and
between items. Portions placed on the diagonally striped
area cannot be scanned.
 more than 0.4 inch (1 cm)
Note

						

							2.Place the documents on the ADF, then adjust the document guides to the width of the
documents.
Insert the documents face-up until a beep sounds.
Note

						

							Adjusting Cropping Frames (ScanGear)"Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when
scanning it.
On the  Basic Mode  tab and Advanced Mode  tab, you can specify cropping frames (scan areas) on the
image(s) displayed in the Preview area of the screen.
When you perform a scan, each area specified with a cropping frame will be scanned as a separate image.
Note

						

							In whole image view:
Represents an unselected cropping frame. The settings on the  Basic Mode tab or Advanced Mode
tab will not be applied.
Adjusting a Cropping Frame
The cursor will change into 
 (Arrow) when it is positioned over a cropping frame. If you
click and drag the mouse in the direction of the arrow, the cropping frame will expand or contract
accordingly.
The cursor will change into  (Crosshair Arrow) when it is positioned within a cropping frame. Click and
drag the mouse to move the entire cropping frame.
Note

						

							In whole image view:
Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame
in the Preview area. The new cropping frame will be the active cropping frame, and the old cropping frame
will be the unselected cropping frame.
You can create multiple cropping frames and apply different scan settings to each cropping frame.
You can also select multiple cropping frames by clicking them while pressing the Ctrl key.
If you select multiple cropping frames and change the settings on a tab at the right of ScanGear, the
settings will be applied to all the selected cropping frames.
When you create a new cropping frame, it retains the settings of the latest cropping frame.
Note

						

							In whole image view:
To delete a cropping frame, select it and click 
 (Remove Cropping Frame) on the Toolbar.
Alternatively, press the Delete key.
When there are multiple cropping frames, all the selected cropping frames (active cropping frame and
selected cropping frames) are deleted simultaneously.
839 
						

							General Notes (Scanner Driver)ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it.
Scanner Driver Restrictions