Canon printer PIXMA MG7720 User Manual

							InstructionsOpens this guide.
Defaults You can restore the settings in the displayed screen to the default settings.
751 
						

							Save Settings Dialog BoxSelect the  Check scan results  checkbox in Save Settings  of the Settings dialog box to display the  Save
Settings  dialog box after scanning.
You can specify the data format and destination while viewing the thumbnails of scan results.
Important

						

							(3) Save Settings Area
File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are
appended to the set file name in the "_20XX0101_0001" format.
Note

						

							Important
						

							Image Stitch WindowClick  Stitch  in the IJ Scan Utility main screen to display the  Image Stitch window.
You can scan the left and right halves of an item larger than the platen and combine them back into one image. You can scan items up to approximately twice as large as the platen.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Thumbnail View Area
(4) Preview Area
Note

						

							Scan Image 1Start Scanning Image 1 Scans the first item.
Scan Image 2Start Scanning Image 2Scans the second item.
Adjust cropping frames You can adjust the scan area in preview.
If no area is specified, the image of the size selected in  Select Output Size will be saved. If an area
is specified, only the image in the cropping frame will be scanned and saved.
Adjusting Cropping Frames in the Image Stitch Window
756 
						

							SaveSaveSaves the two scanned images as one image.
Cancel Cancels  Stitch scan.
(2) Toolbar You can delete the scanned images or adjust the previewed images.
 (Delete)
Deletes the image selected in the Thumbnail View area.
 (Enlarge/Reduce)
Allows you to enlarge or reduce the preview image.
Left-clicking the Preview area enlarges the displayed image. Right-clicking the Preview area reduces the displayed image.
 (Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
 (Rotate 180
						

							When no image has been scanned:
After scanning the first item by clicking Start Scanning Image 1:
The image is scanned in the direction specified in Scan Direction, and 2 appears next to it.
After scanning the second item by clicking Start Scanning Image 2:
The two scanned images appear.
Related Topic
Scanning Originals Larger than the Platen (Image Stitch)
758 
						

							Scanning Using Application Software (ScanGear)
What Is ScanGear (Scanner Driver)?
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode
Scanning in Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in
Advanced Mode
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
ScanGear (Scanner Driver) Screens
Positioning Originals (Scanning from Computer)
Adjusting Cropping Frames (ScanGear)
General Notes (Scanner Driver)
Important

						

							What Is ScanGear (Scanner Driver)?ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output
size and make image corrections when scanning.
ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface
called TWAIN. (ScanGear is a TWAIN-compatible driver.)
What You Can Do with This SoftwareThis software enables you to preview scan results or set document type and output size, etc. whenscanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens There are two modes: Basic Mode and Advanced Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note