Canon printer PIXMA MG7720 User Manual

							Stamp/Background PrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the Page Setup  tab
The Stamp/Background  (Stamp ) dialog box opens.
Note

						

							3.Select a stamp
Check the  Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the  Page Setup tab.4.
Set the stamp details
If necessary, specify the following settings, and then click  OK.
Define Stamp... button To 
change the stamp text, bitmap, or position , click this.
Place stamp over text To print the stamp on the front of the document, check this check box.
Note

						

							Select Background... buttonTo 
use another background or change the layout or density of a background , click this.
Background first page only To print the background only on the first page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the data is printed with the specified background.
Important

						

							Registering a StampThis feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
Registering a New Stamp1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the Page Setup  tab
The Stamp/Background  (Stamp ) dialog box opens.
Note

						

							4.
Configure the stamp while viewing the preview window

						

							6.Complete the setup
Click  OK. The  Stamp/Background  (Stamp ) dialog box opens again.
The registered title appears in the  Stamp list.
Changing and Registering Some of Stamp Settings1.
Select the stamp for which the settings are to be changed
Select the  Stamp check box in the  Stamp/Background  (Stamp ) dialog box. Then from the list, select
the title of the stamp to be changed.
2.
Click  Define Stamp...
The  Stamp Settings  dialog box opens.
3.
Configure the stamp while viewing the preview window
4.
Overwrite save the stamp
Click  Save overwrite  on the Save settings  tab.
When you want to save the stamp with a different title, type a new title in the  Title box and click  Save.
Click  OK when the confirmation message appears.
5.
Complete the setup
Click  OK. The  Stamp/Background  (Stamp ) dialog box opens again.
The registered title appears in the  Stamp list.
Deleting an Unnecessary Stamp
1.
Click  Define Stamp...  in the Stamp/Background  (Stamp ) dialog box
The  Stamp Settings  dialog box opens.
2.
Select the stamp to be deleted
Select the title of the stamp you want to delete from the  Stamps list on the  Save settings  tab. Then
click  Delete .
Click  OK when the confirmation message appears.
3.
Complete the setup
Click  OK. The  Stamp/Background  (Stamp ) dialog box opens again.
466 
						

							Registering Image Data to be Used as a BackgroundThis feature may be unavailable when certain printer drivers or operating environments are used.
You can select a bitmap file (.bmp) and register it as a new background. You can also change and register
some of the settings of an existing background. An unnecessary background can be deleted.
The procedure for registering image data to be used as a background is as follows:
Registering New Background1.
Open the printer driver setup window
2.
Click  Stamp/Background...  on the Page Setup  tab
The Stamp/Background  dialog box opens.
Note

						

							4.
Select the image data to be registered to the background
Click  Select File... . Select the target bitmap file (.bmp), and then click  Open.
5.
Specify the following settings while viewing the preview window
Layout Method Select how the background image data is to be placed.When  Custom  is selected, you can set coordinates for  X-Position and Y-Position .
You can also change the background position by dragging the image in the preview window.
Intensity Set the intensity of the background image data with the  Intensity slider. Moving the slider to the
right darkens the background, and moving the slider to the left lightens the background. To print the background at the original bitmap intensity, move the slider to the rightmost position.
6.
Save the background
Click the  Save settings  tab and enter a title in the  Title box, and then click  Save.
Click  OK when the confirmation message appears.
Note

						

							3.Specify each item on the Background tab while viewing the preview window4.
Save the background
Click  Save overwrite  on the Save settings  tab. When you want to save the background with a
different title, enter a new title in the  Title box and click  Save.
Click  OK when the confirmation message appears.
5.
Complete the setup
Click  OK, then it returns to  Stamp/Background  dialog box.
The registered title appears in the  Background list.
Deleting an Unnecessary Background
1.
Click  Select Background...  in the Stamp/Background  dialog box
The  Background Settings  dialog box opens.
2.
Select the background to be deleted
Select the title of the background you want to delete from the  Backgrounds list on the Save settings
tab, and then click  Delete.
Click  OK when the confirmation message appears.
3.
Complete the setup
Click  OK, then it returns to  Stamp/Background  dialog box.
469 
						

							Setting Up Envelope PrintingThe procedure for performing envelope printing is as follows:1.
Load envelope  on the printer
2.
Open the printer driver setup window
3.
Select the media type
Select  Envelope  from Commonly Used Settings  on the Quick Setup  tab.
4.
Select the paper size
When the  Envelope Size Setting  dialog box is displayed, select  Envelope Com 10, Envelope DL ,
Yougata 4 4.13"x9.25" , or Yougata 6 3.86"x7.48" , and then click OK.
5.
Set the orientation
To print the addressee horizontally, select  Landscape for Orientation .
6.
Select the print quality
Select  High or Standard  that matches your purpose for  Print Quality.
7.
Complete the setup
Click  OK.
When you execute print, the information is printed on the envelope.
470