Konica Minolta bizhub 362 User Manual

							3Basic copy operation
3-56 362/282/222
Basic copy operation
Chapter 3
When finisher is installed
To bind copies with staples
1In the Basics screen, 
touch [Finishing].
The Finishing screen ap-
pears.
2Touch either [Corner 
Staple] or [2 Staples].
–If “Corner Staple” is 
selected, the copies 
are bound together 
with a staple in the 
upper-left corner.
– If “2 Staples” is se-
lected, [Position Set-
ting] appears in the 
screen. To select the 
binding position, 
continue with step 3.
– If a staple setting is selected, the [Sort] setting is automatically se-
lected.
– To cancel the staple setting, touch [Corner Staple] or [2 Staples] 
again to deselect it.
Paper WeightPaper SizeLoading Capacity (detected in ei-
ther measurement)
15 lb to 24 lb Letter w/v1,000 sheets 6 inch
11 × 17 w, Legal w500 sheets 3 inch
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation3
362/282/222 3-57
Basic copy operation
Chapter 3
3Touch [Position Setting], 
and then select the de-
sired position.
– Touch [Auto] to auto-
matically determine 
the binding position 
according to the ori-
entation of the load-
ed document.
4Touch [Enter].
The Finishing screen appears again.
Punching holes in copies (punch settings)
!
Detail 
If a punch setting is to be selected, select the orientation in which the 
document is positioned. If an Original Direction setting is not selected, 
holes may not be punched in the copies as desired. For details on spec-
ifying the document orientation, refer to “Selecting the document orien-
tation (Original Direction settings)” on page 3-19.
When finisher is installed
To punch holes in copies
1In the Basics screen, 
touch [Finishing].
The Finishing screen ap-
pears.
Paper WeightPaper Size
16 lb to 24 lb 11 × 17 w, Letter w/v
Downloaded From ManualsPrinter.com Manuals 
						

							3Basic copy operation
3-58 362/282/222
Basic copy operation
Chapter 3
2Touch [Hole-Punch].
– To cancel the punch 
setting, touch [Hole- 
Punch] again to 
deselect it.
3Touch [Position Setting], 
and then select the de-
sired position.
– Touch [Auto] to auto-
matically determine 
the position of the 
punched holes ac-
cording to the orien-
tation of the loaded 
document.
4Touch [Enter].
The Finishing screen appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation3
362/282/222 3-59
Basic copy operation
Chapter 3
Binding copies at the center
Copies can be fed out folded in half and stapled at two places along the cent-
er.
To bind copies at the center
0For details on specifying the “Booklet” function, refer to “Creating book-
let copies (“Booklet” function)” on page 8-22.
0The position of the fold and the center staples can be adjusted from the 
Utility mode. For details, refer to “Crease/Center Staple” on page 11-17.
1Select the “Booklet” function in the Book Copy/Repeat screen of the 
Application screen.
2In the Basics screen, 
touch [Finishing].
Paper WeightPaper SizeNumber of Bound Pages
15 lb to 24 lb Letter w, 11 × 17 w2 to 15 sheets
Document
(“Booklet” function
is set.)Bound copy
(folded in half and stapled
at two places)
Downloaded From ManualsPrinter.com Manuals 
						

							3Basic copy operation
3-60 362/282/222
Basic copy operation
Chapter 3
3The Finishing screen ap-
pears.
Touch [2 Staples] and 
[Crease].
– To cancel center 
binding, touch [2 
Staples] and [Crease] 
again to deselect 
them.
4Touch [Enter].
The Basics screen appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation3
362/282/222 3-61
Basic copy operation
Chapter 3
3.11 Scanning the next document during printing (reserv-
ing a copy job)
The settings for the next copy job can be specified and the document can be 
scanned while a copy operation is being performed so that it can be printed 
once the current copy operation is finished.
To reserve a copy job
0A copy job can be reserved only if optional hard disk is installed.
0Up to 5 copy jobs, including the current copy job, can be queued.
0A copy job can be reserved after scanning of the loaded document is fin-
ished.
0A copy job cannot be reserved while a document is being scanned.
0For details on positioning the document, refer to “Feeding the document” 
on page 3-8.
0To stop the job being printed, press the [Stop] key. For details, refer to 
“Stopping/deleting a job” on page 3-63.
In addition, the job can be deleted from the Job List screen. For details, 
refer to “To delete a job” on page 4-25.
1Press the [Start] key to 
begin scanning and 
printing the current copy 
job.
A message appears, in-
dicating that the docu-
ment is being scanned.
2When the message 
“Ready to accept anoth-
er job.” appears, copy 
settings can be specified 
for the next copy job.
Downloaded From ManualsPrinter.com Manuals 
						

							3Basic copy operation
3-62 362/282/222
Basic copy operation
Chapter 3
3Press the [Start] key.
4After the current copy job is finished, the next copy job begins.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation3
362/282/222 3-63
Basic copy operation
Chapter 3
3.12 Stopping/deleting a job
The following procedure describes how to stop scanning the document, stop 
the printing operation and delete the copy job.
To stop/delete a copy job
0If a document is being scanned for a job, pressing the [Stop] key stops 
scanning and printing.
1Press the [Stop] key 
while a document is be-
ing scanned or a job is 
being printed.
After the message 
“Copy cycle temporarily 
suspended.” appears, 
scanning and printing 
stops.
The Stop screen ap-
pears.
2Perform the desired operation.
– To delete a stopped or queued job, touch the button for the job to 
be deleted. The job is deleted.
– To continue the stopped job, press the [Start] key.
!
Detail 
A job can also be deleted from the Job List screens. For details, refer to 
“To delete a job” on page 4-25.
A function other than a copy function cannot be selected while pages are 
being scanned for copying, while copy scanning is paused, or while print-
ing is paused.
Stop
Start
Downloaded From ManualsPrinter.com Manuals 
						

							3Basic copy operation
3-64 362/282/222
Basic copy operation
Chapter 3
Downloaded From ManualsPrinter.com Manuals 
						

							4
Additional copy operations
Chapter 4
Additional copy 
operations
Downloaded From ManualsPrinter.com Manuals