Konica Minolta bizhub 362 User Manual

							4Additional copy operations
4-22 362/282/222
Additional copy operations
Chapter 4
!
Detail 
For details on the Com. tab of the Job List screen, refer to the User’s 
Guide [Facsimile Operations].
For details on the Doc. tab of the Job List screen, refer to the User’s 
Guide [Facsimile Operations] and the User’s Guide [Box Operations].
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-23
Additional copy operations
Chapter 4
4.7 Performing operations on jobs
To check a job being performed
1Touch [Job List].
The Job List screen ap-
pears.
2Check the job being per-
formed.
– Touch  and 
 to display a dif-
ferent screen.
– A maximum of 8 jobs 
being performed can 
be displayed.
!
Detail 
A job being performed or a job waiting to be performed, such as a queued 
job, can be deleted. For details, refer to “To delete a job” on page 4-25. 
In addition, the job can be deleted after the [Stop] key is pressed. For de-
tails, refer to “Stopping/deleting a job” on page 3-63.
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-24 362/282/222
Additional copy operations
Chapter 4
To check the printing order
1Touch [Job List].
The Job List screen ap-
pears.
2Touch [Print Order].
3Check the printing order.
– Touch  and 
 to display a dif-
ferent screen.
– The printing order for 
a maximum of 8 jobs 
can be displayed.
!
Detail 
A job being performed or a job waiting to be performed, such as a queued 
job, can be deleted. For details, refer to “To delete a job” on page 4-25. 
In addition, the job can be deleted after the [Stop] key is pressed. For de-
tails, refer to “Stopping/deleting a job” on page 3-63.
Downloaded From ManualsPrinter.com Manuals 
						

							Additional copy operations4
362/282/222 4-25
Additional copy operations
Chapter 4
To delete a job
A job being performed or a job waiting to be performed can be deleted.
1Touch [Job List].
The Job List screen ap-
pears.
2Select the job that you wish to delete.
– If the job that you 
wish to delete is not 
displayed, 
touch  and   
until the desired job 
is displayed.
The screen for deleting 
the selected job ap-
pears.
3Check the information 
that is displayed, and 
then touch [Delete].
The selected job is delet-
ed.
4Touch [OK].
The Job List screen appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							4Additional copy operations
4-26 362/282/222
Additional copy operations
Chapter 4
!
Detail 
A job can also be deleted after the [Stop] key is pressed. For details, refer 
to “Stopping/deleting a job” on page 3-63.
Downloaded From ManualsPrinter.com Manuals 
						

							5
Troubleshooting
Chapter 5
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							5Troubleshooting
5-2 362/282/222
Troubleshooting
Chapter 5
5 Troubleshooting
5.1 When the message “Malfunction detected.” appears 
(Call technical representative)
If a malfunction that cannot be corrected by the user occurred, the message 
“Malfunction detected. Please call your Technical Representative.” appears. 
(call technical representative screen)
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting5
362/282/222 5-3
Troubleshooting
Chapter 5
To correct the error
1Write down the malfunction code (for example, C-0001) in the call tech-
nical representative screen.
2Turn the machine off by using the [Power] (auxiliary power) key and the 
main power switch.
3Unplug the machine.
4Contact the technical representative, and inform them of the malfunc-
tion code.
2
Reminder 
Since the machine may be damaged, contact the technical representa-
tive according to the procedure described above as soon as the call tech-
nical representative screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							5Troubleshooting
5-4 362/282/222
Troubleshooting
Chapter 5
5.2 When the message “Misfeed detected.” appears
If a misfeed occurs during copying or printing, the message “Misfeed detect-
ed.” appears and the location of the misfeed is indicated in the screen. (mis-
feed screen)
At this time, copying and printing cannot continue until the misfeed is ade-
quately cleared.
Location of paper misfeed
“×” indicates the location of the paper misfeed. In addition, a lit “o” indicates 
areas where paper may have been misfed and that should be checked.
Example: Screen when a paper misfeed occurs in a paper tray
2
Note 
The procedure for clearing misfed paper differs depending on where the 
misfeed occurs. Determine the misfeed location by looking at the illustra-
tion displayed with the error message, and then clear the misfeed ac-
cording to the appropriate procedure.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting5
362/282/222 5-5
Troubleshooting
Chapter 5
Paper misfeed indications
No.Description
1 A paper misfeed in the ADF (page 5-6)
2 A paper misfeed in the automatic duplex unit (page 5-12)
A paper misfeed in the 1st tray (page 5-15)
3 A paper misfeed in the fusing unit (page 5-8)
4 A paper misfeed in the bypass tray (page 5-13)
5 A paper misfeed in the 2nd tray (page 5-15)
6 A paper misfeed in the 3rd or 4th tray (page 5-17)
7 A paper misfeed in the LCT (page 5-18)
8 A paper misfeed in the finisher (page 5-19)
9 A paper misfeed in the mailbin kit (page 5-22)
10 A paper misfeed in the saddle stitcher (page 5-24)
125 3
8
9104
6
7
Downloaded From ManualsPrinter.com Manuals