Konica Minolta bizhub 362 User Manual

							10Care of the machine
10-8 362/282/222
Care of the machine
Chapter 10
Downloaded From ManualsPrinter.com Manuals 
						

							11
Utility mode
Chapter 11
Utility mode
Downloaded From ManualsPrinter.com Manuals 
						

							11Utility mode
11-2 362/282/222
Utility mode
Chapter 11
11 Utility mode
11.1 Overview of Utility mode parameters
List of registration information and parameters
This section describes the buttons available when the [Utility/Counter] key is 
pressed.
2
Note 
The buttons that appear in the screens differ depending on the specified 
settings.
Buttons marked with*
1 may not appear depending on the specified set-
tings or whether specific options are installed. For details, refer to the 
corresponding page for the button.
The names of buttons marked with
*2 may be different when fax kit is in-
stalled.
For details on the buttons marked with
*3, refer to the User’s Guide [Fac-
simile Operations].
For details on buttons marked with
*4, refer to the User’s Guide [Network 
Scanner Operations].
For details on buttons marked with
*5, refer to the User’s Guide [Print Op-
erations].
For details on the buttons marked with
*6, refer to the User’s Guide [Box 
Operations].
If user authentication settings have been specified and the [Utility/Coun-
ter] key is pressed without performing user authentication, only the but-
tons marked with
*7 appear.
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode11
362/282/222 11-3
Utility mode
Chapter 11
Utility/Counter
User Setting User’s Choice 
(p. 11-9)1/6 Mixed Original 
Detection
Language Se-
lection
Measurement 
Unit Setting
Machine Authenti-
cation PW Change
2/6Default Setting 
Simplex / Duplex
Auto Paper / 
Auto Zoom
Priority Tray
Special Paper 
Setting
Zoom Ratio for 
Combine Booklets
3/6 Low Power 
Mode
Sleep Mode
LCD Back-
Light OFF
Auto Reset
Auto Reset when 
Account is changed
4/6 4in1 Copy Or-
der
Default Quality / 
Density Modes
Default Copy 
Density Levels
Print Density
Default Finish-
ing Mode
5/6 Sort / Non-Sort 
Auto Change
Output Tray 
Settings
*1
Auto Paper Select 
for Small Original
Crease / Cent-
er Staple*1
6/6 Default Screen
Downloaded From ManualsPrinter.com Manuals 
						

							11Utility mode
11-4 362/282/222
Utility mode
Chapter 11
Default Device
Image Quality 
(ADF)
E-Mail Input
*2One - Touch
Index
Mail Program
*2
Domain Name*4
Bulletin*1*3
Conf. Box*1*3
Store Overlay 
(p. 8-28)
User Management 
(p. 11-19)Confirmation 
Beep
Alarm Volume
Line Monitor 
Sound
*1
Job Complete 
Beep
Panel Cleaning 
Toner Supply
Memory RX ON 
/ OFF
 *3
POP3 RX *3
Admin. Management *7 
(p. 11-21)Admin. 1 Initial Setting 
(p. 11-23)Date & Time 
SettingDate & Time 
Setting
Language for 
CommunicationTime Zone
Day Light Sav-
ing Time
Self-Telephone # 
information *1*3Self-Telephone 
#
TSI Registra-
tionPBX Connec-
tion Mode
Self-ID 
*1*3Dialing Method
Admin. Set 
(
p. 11-25)Administrator 
Code Input
Max. Copy 
Sets
Disable Sleep 
Mode
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode11
362/282/222 11-5
Utility mode
Chapter 11
Restrict One 
Touch Editing *3
Activity Report 
E-Mail TX
Account / User 
Auth.User Authenti-
cation ON/OFF
Allow Print 
without Au-
thentication
 *1
External Server 
Authentication 
*1 (p. 11-40)
General Set-
tings
Domain Setting Change Set-
tings
Machine Auth. 
Setting 
*1 (p. 11-42)
User Registra-
tion
Account Track 
Setting 
*1 
(p. 11-31)Account Data Reset All 
Counters
TX Settings 
*3Quality / Mode Default Quality
Default Density
Communica-
tion Mode
Comm. Menu TX
TSI TX Time Infor-
mation
Rotation TX TSI Selection
2-Sided TX
RX Settings
*3Memory RX 
Time SettingMemory Lock 
Time
Confidential RX 
User Box Delete*1*3Memory Lock 
Password
FAX Setting
*1*3RX Functions Reception 
Mode
Numbers of RX 
Call Rings
Password 
CommunicationCommunica-
tion Password
Print Lists
*3Setting List
Report Set-
tings
*3TX Report
Activity Report
Downloaded From ManualsPrinter.com Manuals 
						

							11Utility mode
11-6 362/282/222
Utility mode
Chapter 11
Document 
ManagementTX Document
RX Document
Admin. 2 Network Set-
tings
*4Network Set-
ting 1Basic Settings DHCP
IP Address Set-
ting
Subnet Mask
Gateway
Self-Domain 
Name
Network Board 
Set
DNS Settings
Machine Name
SMTP Settings SMTP Server 
Address
E-Mail Address
POP3 Settings POP3 Server 
Address
POP3 User 
Name
POP3 Pass-
word
Auto-RX Check
Priority Com-
press LevelE-Mail Mode
Scan Mode
Scanner Set-
tingsActivity Report
RX Doc.Header 
Print
E-Mail Header 
Text
Gateway TX
Subject Regis-
tration
Divide Settings
Page Division
Binary Division
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode11
362/282/222 11-7
Utility mode
Chapter 11
Binary Division 
Size
LDAP Setting LDAP Search
Frame Type Set LDAP Server 
Setting
IP Filtering Accept Setting
Deny access
Network Set-
ting 2IP Relay Set-
tings
*1IP Relay Station 
Registration
IP Relay Station 
Setting
Relay Result 
Port
Printer Setting
*5Timeout
Software SW 
(
p. 11-50)No Matching 
Paper in Tray 
Setting
Ping
*4
Security Setting Enhance Se-
curity*1
Delete Job*4Unlock
SSL/TLS
*4
Memory Man-
agement*1*6Overwrite All 
Data
HDD Lock Set-
ting
*1
Encryption 
Setting*1
Format*1
Reports TX Report
RX Report
One-Touch List
Program List
*3Index List
Bulletin List
*1*3
Confidential 
List*1*3
Printer Setting*5MFP  Set Proof Print Hold 
Time
Downloaded From ManualsPrinter.com Manuals 
						

							11Utility mode
11-8 362/282/222
Utility mode
Chapter 11
Overwrite
A4← →Letter
Document Hold 
Time
PostScript Error 
Report
Default Set Basic Tray
Paper Size
Original Direc-
tion
Print Method
# of Sets
Font Font #
Symbol Set
Number Lines
Font Size
CR/LF Map-
ping
PDL Set
Test Print
Check Detail
*7 
(p. 10-6)Counter
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode11
362/282/222 11-9
Utility mode
Chapter 11
11.2 Specifying User’s Choice settings
From the User’s Choice screens, the default settings (settings selected when 
the machine is turned on) can be specified.
The following procedure describes how to display the User’s Choice screens 
and specify its settings.
To specify User’s Choice settings
1Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2Touch [User Setting].
3Touch [User’s Choice].
The User’s Choice 
screen appears.
Downloaded From ManualsPrinter.com Manuals