Konica Minolta bizhub 362 User Manual

							9Replacing toner bottles and staples and emptying punch waste containers
9-4 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
To replace the toner bottle
1Open the machine’s front door.
2Pull the toner hopper out 
toward you as far as 
possible.
3While pulling on the han-
dle, flip up the toner bot-
tle holder.
4Carefully pull out the 
used toner bottle.
?How is the used ton-
er bottle disposed 
of?
%Do not throw away 
the empty toner bot-
tle. Instead, keep it 
so that it can be col-
lected by your tech-
nical representative.
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-5
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
5Hit one end of the new 
toner bottle against a 
hard surface, such as a 
d e s k  o r  t a b l e ,  f o u r  o r  f i v e  
times, and then hit the 
other end four or five 
times.
– The toner within the 
toner bottle may 
have become com-
pacted. If it has, be 
sure to shake the 
toner bottle until the 
toner is mostly broken up before installing the bottle.
6Shake the new toner 
bottle up and down 
about five times.
7Insert the toner bottle 
into the toner hopper 
with the label on the bot-
tle facing up.
Downloaded From ManualsPrinter.com Manuals 
						

							9Replacing toner bottles and staples and emptying punch waste containers
9-6 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
8Flip down the toner bot-
tle holder so that it locks 
into place. Grab the seal 
on the toner bottle, and 
then slowly pull it off to-
ward you.
9Insert the toner hopper 
until it snaps into place.
10Close the front door.
2
Reminder 
When the front door is closed, toner replenishing begins automatically. 
While the toner is being replenished, do not turn the machine off or open 
any door of the machine.
!
Detail 
If the print is faint immediately after the toner bottle is replaced, replenish 
the toner. For details on replenishing toner, refer to “Toner Supply” on 
page 11-20.
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-7
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
9.2 Replacing the staple cartridge
When the staple cartridge runs out of staples, the message shown below ap-
pears.
Example: Message when the finisher has run out of staples
!
Detail 
Be sure to replace the staple cartridge only after the message appears, 
otherwise the machine may be damaged.
To replace the staple cartridge in finisher
1Open the front door.
Downloaded From ManualsPrinter.com Manuals 
						

							9Replacing toner bottles and staples and emptying punch waste containers
9-8 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
2Push up the staple car-
tridge holder, and then 
remove it toward you.
3Press in the area marked 
“PUSH” to unlock the 
staple cartridge holder.
PUSH
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-9
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
4Remove the empty sta-
ple cartridge from the 
staple cartridge holder.
5Insert the new staple 
cartridge into the staple 
cartridge holder.
Downloaded From ManualsPrinter.com Manuals 
						

							9Replacing toner bottles and staples and emptying punch waste containers
9-10 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
6Carefully remove the 
stopper.
7Insert the staple car-
tridge holder, and then 
push it down until it 
locks into place.
8Close the front door.
To replace the staple cartridge in saddle stitcher
1Raise the copy output 
tray, and then push 
down the staple car-
tridge holder and re-
move it.
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-11
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
2Press in the area marked 
“PUSH” to unlock the 
staple cartridge holder.
3Remove the empty sta-
ple cartridge from the 
staple cartridge holder.
PUSH
Downloaded From ManualsPrinter.com Manuals 
						

							9Replacing toner bottles and staples and emptying punch waste containers
9-12 362/282/222
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
4Load the new staple car-
tridge into the staple car-
tridge holder.
5Carefully remove the 
stopper.
Downloaded From ManualsPrinter.com Manuals 
						

							Replacing toner bottles and staples and emptying punch waste containers9
362/282/222 9-13
Replacing toner bottles and staples and emptying punch waste containers
Chapter 9
6Insert the staple car-
tridge holder, and then 
push it up until it locks 
into place.
– When inserting the 
staple cartridge 
holder, be sure to in-
sert it so that it faces 
the correct direction.
7Return the copy output tray to its original position.
8Pull the handle of the 
misfeed-clearing door to 
open it, and then close it.
Downloaded From ManualsPrinter.com Manuals