Konica Minolta bizhub 362 User Manual

							2Before making copies
2-2 362/282/222
Before making copies
Chapter 2
2 Before making copies
2.1 Part names and their functions
Options
NoPart nameDescription
Main unit The document is scanned by the scanner sec-
tion, and the scanned image is printed by the 
printer section.
Referred to as the “machine” or “main unit” 
throughout the manual.
1 Original Cover OC-510 Presses down on the loaded document to keep 
it in place. Referred to as the “original cover” 
throughout the manual.
11
7
9 10
8
6543
12
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-3
Before making copies
Chapter 2
2 Reverse Automatic Document Feed-
er DF-620Automatically feeds one document sheet at a 
time for scanning, and automatically turns over 
double-sided documents for scanning if the 
document was set as double-side from the 
touch panel
Referred to as the “ADF” throughout the manu-
al.
3 Paper Feed Cabinet PC-108 The top tray can be loaded with up to 500 
sheets of paper, and the bottom tray can be 
used as storage.
Referred to as the “single paper feed cabinet” 
throughout the manual.
4 Paper Feed Cabinet PC-206 Both the top and bottom trays can each be 
loaded with up to 500 sheets of paper.
Referred to as the “double paper feed cabinet” 
throughout the manual.
5 Paper Feed Cabinet PC-407 Can be loaded with up to 2,500 sheets of paper
Referred to as the “LCT” throughout the manual.
6 Desk DK-506 Allows this machine to be set up on the floor 
Referred to as the “desk” throughout the manu-
al.
7 Job Separator JS-502 Allows printed pages to be separated
Pull the lever when taking out the paper.
Referred to as the “job separator” throughout 
the manual.
8 Finisher FS-530 Feeds out printed pages. The “Sort” setting 
(separate by copy set), “Group” setting (sepa-
rate by page), Staple settings (stapling), and 
Punch settings (hole punching) are available.
Referred to as the “finisher” throughout the 
manual.
9 Output Tray OT-602 Copy output tray installed onto the finisher and 
used for separating printed pages
Referred to as the “optional output tray” 
throughout the manual.
10 Saddle Stitcher SD-507 Installed onto the finisher to allow copies to be 
stapled or bound at the center
Referred to as the “saddle stitcher” throughout 
the manual.
11 Mailbin Kit MT-502 Installed onto the finisher to divide printed pag-
es and feed them into the appropriate bin as-
signed to a specific individual or group (only 
with PC printing)
Referred to as the “mailbin” throughout the 
manual.
12 Punch  Unit  PU-501* Installed onto the finisher to allow hole punching 
to be used
Referred to as the “punch unit” throughout the 
manual.
13 Fax  Kit  FK-503* Allows this machine to be used as a fax machine
NoPart nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-4 362/282/222
Before making copies
Chapter 2
Parts marked with an asterisk (*) are internal options and therefore are not 
shown in the illustration.
14 Scanner Unit SU-501* Internal network scanner unit that allows the 
copier to be used as a scanner configured into a 
computer network
For details, refer to the User’s Guide [Advanced 
Scan Operations].
15 Hard Disk HD-504* Increases the number of document pages to be 
scanned. In addition, multiple jobs can be 
scanned.
16 Expanded Memory Unit EM-303/
304/305*By expanding the memory, the number of 
scanned pages that can be stored in the mem-
ory can be increased.
Referred to as the “expansion memory” 
throughout the manual.
17 Fax Multi Line ML-502* Installed to increase the telephone lines availa-
ble for faxing
18 Dehumidifier Heater 1C* Installed in the paper feed cabinet or desk to 
prevent humidity from collecting in the paper
19 Local Interface Kit EK-502* Used for making a local connection between 
this machine and the computer
20 Mount Kit MK-709* Installs the device to remotely control the ma-
chine. If the fax kit is installed, this option is not 
needed.
21 Stamp Unit SP-501* Used installed on the ADF
Stamps scanned document pages to indicate 
that they have been faxed
22 Security Kit SC-504* Installed to encrypt the data saved on the hard 
disk so that the hard disk can be used more 
safely.
NoPart nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-5
Before making copies
Chapter 2
Outside of machine
*The illustration above shows the main unit with the optional original cover 
installed.
No.Part nameDescription
1 Control panel Used to specify the various settings and per-
form operations such as starting copying
2 [Power] (auxiliary power) key Press to turn on and off machine operations, for 
example, for copying, printing or scanning. 
When turned off, the machine enters a state 
where it conserves energy.
3 Automatic duplex unit door release 
leverUsed to open the automatic duplex unit door
4 Automatic duplex unit door Opened when clearing paper misfeeds within 
the automatic duplex unit
5 Release lever for main unit right-side 
doorUsed to open the right-side door of the main unit
14 13 12 11 10
4 2
5
7 1
3
8
6
9
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-6 362/282/222
Before making copies
Chapter 2
6 Multiple bypass tray Used when printing onto paper with a size not 
loaded into a paper tray or onto thick paper, 
overhead projector transparencies, postcards, 
envelopes or label sheets
Can be loaded with up to 150 sheets of plain pa-
per, 50 overhead projector transparencies, 
postcards, label sheets or sheets of thick paper, 
or 10 envelopes
Referred to as the “bypass tray” throughout the 
manual. (See page 2-60)
7 Tray extension Pull out when large-sized paper is to be loaded.
8 Adjustable document guides Adjust to the width of the paper.
9 Paper stopper Prevents printed pages from falling out of the 
output tray. Use when the optional job separator 
is installed.
10 Copy output tray Collects printed pages fed out of the copier fac-
ing down
11 Front door Opened when replacing the toner bottle (See 
page 9-2)
12 1st tray Can be loaded with up to 500 sheets of paper
The paper size can be adjusted freely. (See 
page 2-54)
13 2nd tray Can be loaded with up to 500 sheets of paper
The paper size can be adjusted freely. (See 
page 2-54)
14 Paper-empty indicator As the amount of paper in the paper tray de-
creases, the area that appears in red increases.
No.Part nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-7
Before making copies
Chapter 2
Inside/back of main unit
*The illustration above shows the main unit with the optional original cover 
and ADF installed.
No.Part nameDescription
1 Document pad Presses down on the document positioned on 
the original glass
2 Original glass Scans the image of the loaded document (See 
page 3-10)
3 Switchback unit Built into the printer to turn over the paper dur-
ing double-sided printing
4 Automatic duplex unit Turns over the paper for double-sided printing
5 Right-side door Open when clearing paper misfeeds in the right-
side door unit or the fusing unit
6 Toner hopper Used when installing and replacing the toner 
bottles
7 Document scales Used to align the document (See page 3-10)
8 Power cord Supplies power to the machine
TEL PORT 1
LINE PORT 1
TEL PORT 2
LINE PORT 2
11
9
81012
1314
15
1617
1
2 7
6
3
45
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-8 362/282/222
Before making copies
Chapter 2
Parts marked with an asterisk (*) are internal options and therefore are not 
shown in the illustration.
9 Main power switch Used to turn the machine on and off (See 
page 2-22, page 2-26)
10 ADF connector Used for connecting the ADF hookup cord
11 TEL PORT1 jack Used for connecting a telephone
12 LINE PORT1 jack Used for connecting the general subscriber line
13 TEL PORT2 jack Used for connecting the cord from the tele-
phone
14 LINE PORT2 jack Used for connecting the general subscriber line
15 IEEE1284 port (type C) Used for connecting a parallel cable from the 
computer
16 Network connector (10 Base-T/100 
Base-TX)Used for connecting the network cable when 
this machine is used for network printing and 
network scanning
17 USB port (type B) USB 2.0/1.1-com-
pliantUsed for connecting a USB cable from the com-
puter
18 Ozone filter* Collects the ozone generated in the machine
19 Filter* Collects the toner dust generated in the ma-
chine
No.Part nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-9
Before making copies
Chapter 2
Reverse Automatic Document Feeder DF-620
No.Part nameDescription
1 Print indicator Lights up or flashes to indicate the status of the 
machine
2 Adjustable document guide Adjusted to the width of the document (See 
page 3-8)
3 Document feed tray Loaded with the documents to be scanned fac-
ing up
4 Document output tray Collects documents that have been scanned
5 Document stopper Raised to prevent large-sized documents from 
falling out of the document output tray
1234
5
Downloaded From ManualsPrinter.com Manuals 
						

							2Before making copies
2-10 362/282/222
Before making copies
Chapter 2
Paper Feed Cabinet PC-108/PC-206/PC-407
Paper Feed Cabinet PC-108/PC-206
No.Part nameDescription
1 4th tray Used for storage when the single paper feed 
cabinet is installed
Can be loaded with up to 500 sheets of paper 
when the double paper feed cabinet is installed
2 3rd tray Can be loaded with up to 500 sheets of paper
3 Lower right-side door release lever Used to open the lower right-side door
4 Lower right-side door Opened when clearing paper misfeeds
432156
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies2
362/282/222 2-11
Before making copies
Chapter 2
Paper Feed Cabinet PC-407
Saddle Stitcher SD-507/Mailbin Kit MT-502
Saddle Stitcher SD-507
Mailbin Kit MT-502
No.Part nameDescription
5 Tray release button Pressed in order to pull out the LCT
6 LCT Can be loaded with up to 2,500 sheets of paper
No.Part nameDescription
1 Copy output tray Collects copies
2 Misfeed-clearing door Opened when clearing paper misfeeds within 
the finisher
No.Part nameDescription
3 Mailbins Collects printed pages
4 Misfeed-clearing door Opened when clearing paper misfeeds
5 Output tray cover Opened when clearing paper misfeeds
5 3
4
2
1
Downloaded From ManualsPrinter.com Manuals