Konica Minolta bizhub 362 User Manual

							8Application functions
8-20 362/282/222
Application functions
Chapter 8
6Touch [Separation] or 
[Book Spread].
– When separating 
page spreads and 
making double-sided 
copies, touch [Page 
Order] to display the 
Page Order screen. 
Touch [Book Order] 
or [Standard], and 
then touch [Enter].
– To cancel the Page 
Order setting, touch 
[OFF].
– If “Page Order” is set to “Book Order”, the left and right pages of 
the spread are copied onto two separate sheets of paper in the 
same page order as the document.
– If “Page Order” is set to “Standard”, the left and right pages of the 
spread are copied onto the front and back sides of a single sheet 
of paper.
– If desired, touch 
[Book Erase] to dis-
play the Book Erase 
screen. Touch the 
buttons indicated by 
“Frame”, specify the 
width of the erased 
area as   and 
, and then 
touch [Enter].
?What do the Book Erase settings do?
%If a Book Erase setting is selected, the dark shadows around the 
document or along the center of the document can be erased.
7Touch [Enter], and then touch [Enter] in the next screen that appears.


Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-21
Application functions
Chapter 8
8In the Basics screen, 
touch [Paper], and then 
select the paper tray 
loaded with the paper.
9Specify any other desired copy settings.
10Using the keypad, type in the desired number of copies.
11Press the [Start] key.
Copying begins.
2
Note 
For details on scanning a document with “Page Order” set to “Book Or-
der”, refer to “Scanning a multi-page document from the original glass” 
on page 3-14.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-22 362/282/222
Application functions
Chapter 8
8.8 Creating booklet copies (“Booklet” function)
Double-sided copies of the document pages are arranged so that the copies 
can be read like a bound book when it is folded in half. Stapling is available 
only if optional finisher is installed.
!
Detail 
Generally, a multiple of 4 document pages is required with a single-sided 
document, and a multiple of 2 document pages is required with a double-
sided document. If there are not enough pages, blank pages are auto-
matically added at the end.
For details on stapling, refer to “Binding copies at the center” on 
page 3-59.
If the document contains more than 80 pages, refer to “Scanning a doc-
ument in separate batches (“Separate Scan” setting)” on page 3-12.
The width of the binding margin is automatically specified.
8
87
73
3
63
6354
2
21
1
REPORT
81
817
REPORT2
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-23
Application functions
Chapter 8
To copy using the “Booklet” function
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then touch [Book Copy/
Repeat].
The Book Copy/Repeat 
screen appears.
3Touch [Booklet].
– To cancel the “Book-
let” function, touch 
[Booklet] again to 
deselect it.
4Specify any other desired copy settings.
5Using the keypad, type in the desired number of copies.
6Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-24 362/282/222
Application functions
Chapter 8
8.9 Printing additional information on copies (Image Set-
tings functions)
A stamp, such as “CONFIDENTIAL” can be added to the center of back-
ground copies, or a distribution number can be added when multiple copies 
are made.
The following Image Settings functions are available.
To print the distribution number (“Set Numbering” function)
0The distribution number is normally printed as a three-digit number. If 
“Starting Number” is set to “1”, “001” is printed.
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
SettingDescription
Set Numbering A three-digit distribution number can be printed on each copy.
Stamp The selected preset text (CONFIDENTIAL, TOP SECRET, 
COPY, DRAFT, DO NOT COPY, FINAL, or PROOF) can be print-
ed.
3
32
21
1
REPORT
3
32
21
1
001REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-25
Application functions
Chapter 8
2Touch [Application], and 
then touch [Image Set-
tings].
The Image Settings 
screen appears.
3Touch [Set Numbering].
– To cancel the Image 
Settings functions, 
touch [OFF].
– If the optional hard 
disk drive is installed, 
the “Image Overlay” 
function can be 
used. For details, re-
fer to “Printing cop-
ies overlapping a 
different image (“Im-
age Overlay” function)” on page 8-28.
The Set Numbering screen appears.
4Using the keypad, type 
in the starting number 
under “Starting 
Number”.
– The starting number 
can be set between 0 
and 999.
– Press the [C] (clear) 
key to reset “Starting 
Number” to “1”.
– To cancel the “Set 
Numbering” func-
tion, touch [OFF].
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-26 362/282/222
Application functions
Chapter 8
5Select the desired settings under “Pages” and “Text Density”.
– If “Pages” is set to “First page only”, the distribution number is only 
printed on the first page of the copy. If “All Pages” is selected, the 
distribution number is printed on all pages.
– Select a setting under “Text Density” to specify the density of the 
printed distribution number.
6Touch [Enter], and then touch [Enter] in the next screen that appears.
7Specify any other desired copy settings.
8Using the keypad, type in the desired number of copies.
9Press the [Start] key.
Copying begins.
To print preset text at the center of the copy image (“Stamp” function)
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then touch [Image Set-
tings].
The Image Settings 
screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-27
Application functions
Chapter 8
3Touch [Stamp].
– To cancel the Image 
Settings functions, 
touch [OFF].
The Stamp screen ap-
pears.
4Select the desired stamp 
text and the desired set-
ting under “Pages”.
– If “Pages” is set to 
“First page only”, the 
stamp is only printed 
on the first page of 
the copy. If “All Pag-
es” is selected, the 
stamp is printed on 
all pages.
– To cancel the 
“Stamp” function, touch [OFF].
5Touch [Enter], and then touch [Enter] in the next screen that appears.
6Specify any other desired copy settings.
7Using the keypad, type in the desired number of copies.
8Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							8Application functions
8-28 362/282/222
Application functions
Chapter 8
8.10 Printing copies overlapping a different image (“Image 
Overlay” function)
Images previously stored on the hard disk can be printed overlapping copies.
To store an overlay image (Store Overlay)
0The “Store Overlay” function is available only if optional hard disk is in-
stalled.
1Position the overlay document to be stored on the hard disk.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Press the [Utility/Coun-
ter] key, and then touch 
[User Setting].
The User Setting screen 
appears.
3Touch [Store Overlay].
The Store Overlay 
screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Application functions8
362/282/222 8-29
Application functions
Chapter 8
4Touch [Set], and then 
touch the button ([1] 
through [5]) for the 
number where the image 
is to be stored.
– If a button is pressed 
where no image is 
stored, the size of the 
stored image ap-
pears on the button 
to indicate that an 
image has been 
stored.
– To store the image with a number where an image is already stored, 
delete the image, touch [Set], and then touch the button for the 
number.
– To delete the image, touch [Delete], and then touch the button for 
the number stored with the image.
5Select the size of the 
area to be scanned.
– To cancel changes to 
the settings, touch 
[Cancel].
– Touch [Auto Detect] 
to automatically de-
tect the size of the 
area to be scanned in 
the document image.
No program registered Program registered
Downloaded From ManualsPrinter.com Manuals