Konica Minolta bizhub C650 User Manual

							C6504-10
Printing a user box document4
– On the European (metric) model:
4To specify the positions of the staples and punched holes, touch [Position Setting].
5Touch the button for the desired position, and then touch [OK].
– When the Corner Staple setting is selected:
– When the 2 Position Staple setting is selected:
– When a Punch setting is selected:
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-11
Printing a user box document4
– On the North American (inch) model:
– On the European (metric) model:
6If finisher FS-608 is installed, touch [Fold/Bind]. If finisher FS-517/FS-518 is installed, touch [Fold].
7Touch [Yes], and then select the desired folding method.
– If finisher FS-608 is installed
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-12
Printing a user box document4
– If finisher FS-517/FS-518 is installed
8Touch [OK], and then touch [OK] in the next screen that appears.
Adding a binding margin
A binding margin can be added to the left or right side or to the top of the printed pages. Settings can be 
specified for the following.
1In the Print screen, touch [Page Margin].
2Touch [Yes].
3Select the desired position for the binding margin, and then use the keypad to specify the width of the 
binding margin.
– The width of the binding margin can be specified in 1/16-inch increments on the North American 
(inch) model (in 0.1 mm increments on the European (metric) model).
ParameterDescription
Margin Position Select the location where the binding margin is to be added. If Auto is selected, a 
binding margin along the long side of the paper is selected if the document length is 
less than 11-11/16 inches on the North American (inch) model (less than 297 mm on 
the European (metric) model). If the document length is more than 11-11/16 inches on 
the North American (inch) model (more than 297 mm on the European (metric) model), 
a binding margin along the short side of the paper is selected.
Adjust Value An area with a width between 1/16 and 3/4 inches on the North American (inch) model 
(between 0.1 and 20.0 mm on the European (metric) model) can be specified. To spec-
ify a binding margin of 0 mm, touch [None].
Image Shift When a binding margin is created, the image can be shifted according to the position 
of the created binding margin. The image can be shifted between 1/16 and 10 inches 
on the North American (inch) model (between 0.1 and 250 mm on the European (met-
ric) model) left, right, up or down, depending on the position of the binding margin. If 
the document is to be printed double-sided, touch [Change Back Shift] to also specify 
the shift on the back side of the pages.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-13
Printing a user box document4
– To set the binding margin to 0 mm, touch [None].
– On the North American (inch) model:
– On the European (metric) model:
4To move the image according to the binding margin, touch [Image Shift].
The Image Shift screen appears.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-14
Printing a user box document4
– On the European (metric) model:
5Touch [OK].
Adding cover pages (Cover Sheet)
Documents can be printed with cover pages added to the front and back.
First, load the paper trays with the paper for the front cover page and the back cover page.
Settings can be specified for the following.
2
Note 
If a setting for the Cover Sheet function is to be specified when printing a copied document, either of 
the following conditions must be met when saving the document in a user box.
A paper tray is specified.
A Cover Sheet setting is specified.
ParameterDescription
Front Cover None Select this setting to add no front cover.
Front 
(Copy)Select this setting to print the first page of the document onto the front cover page.
If 2-Sided is selected, the second page of the document is printed on the back of the 
front cover page.
Front 
(Blank)Select this setting to add the front cover page in front of the first page of the document.
Back Cover None Select this setting to add no back cover.
Back (Copy) Select this setting to print the last page of the document onto the back cover page.
If 2-Sided is selected, the last two pages of the document are printed on the back 
cover page.
Back 
(Blank)Select this setting to add the back cover page after the last page of the document.
4
43
32
21
1
REPORT
4
4
3
32
21
1
REPORTREPORT
4
43
32
22
21
1
REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-15
Printing a user box document4
1In the Print screen, touch [Sheet/Cover/Chapter Insert].
2Touch [Cover Sheet].
3Select the desired cover page format.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-16
Printing a user box document4
– On the European (metric) model:
– To select the post inserter tray, select Front (Blank) or Back (Blank).
4Select the paper trays loaded with the paper for the front and back cover pages. Touch [Paper].
– On the North American (inch) model:
– On the European (metric) model:
5Select the paper tray loaded with the paper for the front or back cover page.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-17
Printing a user box document4
– On the North American (inch) model:
– On the European (metric) model:
6Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-18
Printing a user box document4
Adding insertions (Insert Sheet)
The document can be printed with other paper, such as colored paper, inserted for the specified pages. There 
are settings (Copy and Blank) for selecting whether or not the inserted pages are printed. When the 
settings are combined with single-sided printing or double-sided printing, the document is printed as 
described below.
Example: When page 6 is specified
!
Detail 
The specified paper can be inserted at a maximum of 30 locations within a document of up to 999 
pages.
1In the Print screen, touch [Sheet/Cover/Chapter Insert].
SettingDescription
Copy (with 1-Sided select-
ed)The specified paper is inserted for the 6th page, and the 6th page of the document 
is printed onto it.
Copy (with 2-Sided select-
ed)The back side of the 3rd page is left blank, the specified paper is inserted for the 4th 
page, and a double-sided copy of the 6th and 7th pages of the document are printed 
onto it.
Blank (with 1-Sided select-
ed)A specified paper is inserted after the 6th page.
Blank (with 2-Sided select-
ed)The specified paper is inserted for the 4th page of the printed document.
If an odd-numbered page is specified, the back side is left blank.
4
43
32
21
1
REPORT43
4
2
3
21
1
REPORT
4
23
32
21
1
REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-19
Printing a user box document4
2Touch [Insert Sheet].
3Touch [Yes], and then specify the locations where the paper is to be inserted.
– Touch a button, and then use the keypad to type in the page where the paper is to be inserted.
– To arrange the entered page numbers in order, touch [Sort].
– On the North American (inch) model:
– On the European (metric) model:
Downloaded From ManualsPrinter.com Manuals