Konica Minolta bizhub C650 User Manual

							C6504-30
Printing a user box document4
– Touching [Text Size] displays a screen for specifying the text size. Touch the button for the desired 
size, and then touch [OK].
– Touching [Print Position] displays a screen for specifying the printing position. Touch the button for 
the desired printing position, and then make any fine adjustments, if necessary. After specifying the 
settings, touch [OK].
– To make fine adjustments, touch [Adjust Position].
The position can be adjusted between 1/16 and 1-15/16 inches on the North American (inch) model 
(between 0.1 and 50.0 mm on the European (metric) model) in the left/right direction and the 
up/down direction.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-31
Printing a user box document4
– On the European (metric) model:
4Touch [OK].
5Touch [Close].
Adding preset text or images (Stamp)
Preset text, such as URGENT, can be added to all pages of a document.
Settings can be specified for the following.
1In the Print screen, touch [Stamp/Composition].
ParameterDescription
Stamp Type/Preset Stamps Select a stamp, such as URGENT, DRAFT or DO NOT COPY.
Pages Select the pages to be printed on (either all pages or only the front cover).
Text Color Select the printing color (black, red, blue, green, yellow, cyan and magenta).
Text Size Select the size (minimum or standard) in which text is printed.
Print Position Select the position within the page where the image is printed. After a position is se-
lected, it can be finely adjusted.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-32
Printing a user box document4
2Touch [Stamp].
3To insert a stamp, touch [Yes], and then specify the stamp settings.
– Touching [Text Color] displays a screen for specifying the color. Touch the button for the desired 
color, and then touch [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-33
Printing a user box document4
– Touching [Text Size] displays a screen for specifying the text size. Touch the button for the desired 
size, and then touch [OK].
– Touching [Print Position] displays a screen for specifying the printing position. Touch the button for 
the desired printing position, and then make any fine adjustments, if necessary. After specifying the 
settings, touch [OK].
– To make fine adjustments, touch [Adjust Position].
The position can be adjusted between 1/16 and 1-15/16 inches on the North American (inch) model 
(between 0.1 and 50.0 mm on the European (metric) model) in the left/right direction and the 
up/down direction.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-34
Printing a user box document4
– On the European (metric) model:
4Touch [OK].
5Touch [Close].
Adding text and images to prevent copying (Copy Protect)
Print hidden text on all pages of a document in order to prevent unauthorized copying. When a document 
printed with copy protection text is copied, the hidden text appears clearly repeated throughout the pages 
of the copies so that the reader knows that it is a copy.
The following information can be inserted as copy protection.
!
Detail 
The printed serial number is the serial number of the machine. For details on specifying the serial 
number, contact your technical representative.
Use the Copy Protection Utility to register a registered stamp. For details, refer to the manual for the 
utility.
3
32
21
1
REPORT
3
32
2
11
REPORT
3
3Draft
Draft
Draft
DraftDraft
Draft
Draft
Draft2
2Draft
Draft
Draft
DraftDraft
Draft
Draft
DraftDraft
Draft
Draft
DraftDraft
Draft
Draft
Draft
11
REPORT
TypeDescription
Registered Stamp Insert stamp images previously registered with the utility.
Preset Stamp Insert preset text, such as Invalid Copy, Copy or INTERNAL USE ONLY, as pre-
set stamps.
Date/Time Insert the date and time that the document was registered.
Other Insert the job number assigned to the document, the serial number or a distribution 
number.
Job Number: Select whether to print the job number.
Serial Number: Select whether to print the serial number of the machine.
Distribution Control Number: Select whether to print the entered distribution numbers.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-35
Printing a user box document4
The paper is divided into 8 blocks for copy protection, and the items within that area can be increased.
The number of areas required for each item is listed below.
!
Detail 
When text is arranged at a +45-degree angle (-45-degree angle), up to four areas are needed.
To insert spaces, touch [Position].
To specify the following copy protection settings, touch [Detailed Settings].
To perform the following operations, touch [Position].
-Changing the angle of text within the area (+45 degrees, 0 degrees (none) or -45 degrees)
-Inserting spaces between copy protection
-Changing the printing order of copy protection
-Deleting copy protection or spaces
1In the Print screen, touch [Stamp/Composition].
ItemDescriptionRequired number of areas
Registered Stamp One stamp 1
Preset Stamp One stamp 1
Date/Time Date Format 1
Time Format 1
Other Job Number 1
Serial Number 1
Distribution Control Number 1
ParameterDescription
Text/Background Color Select the color (black, cyan or magenta) used to print the text and background.
Density Select the printing density (light, std. or dark).
Copy Protect Pattern Select the pattern type and contrast when the document is copied.
Text Size Select the size (minimal, std. or large) in which text, such as the date/time, is printed.
Pattern Overwrite Select whether the pattern is printed on top of or behind the document text. 
Background Pattern Select the pattern to be printed in the background.
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-36
Printing a user box document4
2Touch [Copy Protect].
3To apply copy protection, touch [Yes], and then specify the copy protection settings.
– Touching [Preset Stamp] displays a screen for specifying the preset stamp settings. Touch the 
button for the desired stamp type, and then touch [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-37
Printing a user box document4
– Touching [Date/Time] displays a screen for specifying the date/time settings. Select the information 
to be inserted, and then touch [OK].
– Touching [Other] displays a screen for specifying other settings. Select the information to be 
inserted, and then touch [OK].
4To specify detailed copy protection settings, touch [Detailed Settings].
A screen for specifying settings appears. Specify the desired settings, and then touch [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-38
Printing a user box document4
– Text/Background Color
–Density
– Copy Protect Pattern
Downloaded From ManualsPrinter.com Manuals 
						

							C6504-39
Printing a user box document4
–Text Size
– Pattern Overwrite
– Background Pattern
5After finishing changing the settings, touch [Close].
Downloaded From ManualsPrinter.com Manuals