Home
>
Mitel
>
Communications System
>
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Have a look at the manual Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Mitel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SUPERSET 4DN Telephone information 8. PACKAGING General 8.01The SUPERSEJ 4DN telephone is shipped in a single carton. 8.02On delivery at the destination, carefully unpack the SUPERSEJ 4DN telephone carton and check that all items are present and undamaged.’ Retain some packaging for reshipment of any damaged items. 8.03 The SUPERSEJ 4DN telephone consists of a main assembly, handset, and handset cord. Additional items include identifica- tion cards (for telephone numbers and lines), protective covers for these cards, reference guide, installation guide, and warranty tag. Page 21
SUPERSET 4DN Telephone Information 9. INSTALLATION AND MAINTENANCE WARNING ANY CONNECTION OF THIS SET TO AN OFF PREMISE APPLICATION, AN OUT OF PLANT APPLICATION, OR TO ANY OTHER EXPOSED PLANT APPLICATION MAY RESULT IN A SAFETY HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE. 9.01Installers should not attempt to use a hand test telephone (butt in) to check SUPERSET 4DN telephone lines, because there is no loop detector installed in the PABX Digital Line Card: set on-/off-hook status is signaled using data transmission. SUPERSET 4DN telephones must not be connected to standard lines, in parallel, or as Power Fail Transfer extensions. Installation 9.02Installation of a SUPERSET 4DN telephone is simplified because of the following: lHandset and line cords are modular-connector-ended. aNo local power supply is required; the system provides power through the line. 0Only nonessential user programming is performed at the set; speed dial entry, call forward destination, name, and timed re- minder. 0Installer can use set display feature to identify lines pro- grammed to appear at the set. 0Initialization of the SUPERSET 4DN telephone occurs automati- cally when the set is connected to the system and pro- grammed. It takes 20-30 seconds; during part of the initializa- tion procedure, WAITING FOR COMMUNICATION is displayed. Upon completion, time and date are displayed. 9.03Install a SUPERSET 4DN telephone as follows: lBefore a SUPERSET 4DN telephone can be connected to a PABX system, the PABX must be programmed and equipped with a Digital Line Card to interface with it. lConnect the handset cord to the handset and the main assem- bly. 0Install the card and protective lens onto the main assembly. 0Identify the user’s telephone number, extension number, and other line appearances at the SUPERSET 4DN telephone on the line identification card. Page 23
MITL9109-094-109-NA ainstall the line identification card and protective cover onto the main assembly. 0Connect the line cord to the telephone jack (which has been connected to the Digital Line Card within the PABX). Environmental Specifications Operating Environment: Ambient Temperature: 4 to 49°C (39.2 to 120°F). Ambient Humidity: 10 to 90% RH, noncondensing. Storage/Shipping Environment: Ambient Temperature: -40 to 60°C (-40 to 150°F). Ambient Humidity: IO to 90% RH, noncondensing. Page 24
MITEL STANDARD PRACTICESECTION MITLSI 09-094-125-NAIssue 1, March 1988 SX-200” DIGITAL PRIVATE AUTOMATIC BRANCH EXCHANGE (PABX) CIRCUIT CARD DESCRIPTIONS @Copyright 1988, MITEL Corporation. All rights reserved, T”Trademark of MITEL Corporation @Registered Trademark of MITEL Corporation
SECTION MITL9109-094-125-NANOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mite1 Corporation (MITEL). The information is subject to change without notice and should not be construed in any way as a commitment by Mite1 or any of its affiliates or subsidiaries. Mite1 and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
Circuit Card Descriptions CONTENTSPAGE1. INTRODUCTION General . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . , 1 Reason for Issue . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . , 1 2. MAIN CONTROL CARD Description.......................................... 3Facilities............................................ 3Operation............................................ 43. DECRYPTION MODULE Brief Description. . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . 7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. RAM MODULE Brief Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5. DX MODULE Brief Description..................................... 11Facilities........................................... 11Electrical Description.................................. 116. Tl CLOCK MODULE Brief Description..................................... 13Electrical Description.................................. 13Physical Description................................... 137. BAY CONTROL CARD General............................................ 15Functions........................................... 15Indicators........................................... 15Electrical Description.................................. ‘I 58. PERIPHERAL CONTROL CARD Brief Description..................................... 17Major Components.................................... 17Facilities........................................... 179. DIGITAL INTERFACE CARD Brief Description..................................... 19Facilities........................................... 19Connections......................................... 1910. UNIVERSAL CARD Brief Description..................................... 21Facilities............................................ 21Physical Description................................... 21Electrical Description.................................. 2111. CONSOLE MODULE Brief Description. . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . 25 Electrical Description . . . . , . . . . . . . . . . , . . . . , . . . , . . . . . . . . . 25 . . .III
SECTION MITL9109-094-q 25-NA CONTENTS (CONT’D) 12. DTMF RECEIVER/RELAY MODULE Brief Description.....................................27 Main Components....................................27 Facilities........................................... 27 Circuit Description....................................27 Relays.............................................28 13. E&M TRUNK MODULE Brief Description.....................................29 Facilities...........................................29 Operation...........................................29 TrunkTypes.........................................30 14. MUSIC ON HOLD/PAGING MODULE Brief Description..................................... 31Major Components.................................... 31Electrical Description.................................. 3115. DID TRUNK CARD Brief Description..................................... 33 Major Components....................................33 Facilities...........................................33 Operation...........................................33 Electrical Description..................................34 16. LWGS TRUNK CARD Brief Description..... ;...............................35 Facilities...........................................35 Electrical Description..................................35 Operation - Loop Start..................................35 Operation - Ground Start...............................37 17. ONS LINE CARD General Description...................................39 Facilities........................................... 39 Electrical Description..................................39 Operation ...........................................40 18. OPS LINE CARD Brief Description...................................... 41Major Components.................................... 41Facilities........................................... 41Operation........................................... 41Electrical Description..................................42 19. COV LINE CARD General................................... .,........43 Major Components....................................43 Facilities...........................................43 Electrical Description..................................44 iv
Circuit Card Descriptions CONTENTS (CONT’D)PAGE20. DIGITAL LINE CARD General Description ...................................45 Facilities ...........................................45 Electrical Description ..................................45 DNIC Description .....................................46 Operation ...........................................46 21. POWER FAIL TRANSFER CARD (6 CIRCUIT) Brief Description .....................................47 Connections......................................... 47 Electrical Description ..................................47 Operation........................................... 48 22. SWITCH MATRIX CARD Facilities ............................................ 51DXArray...........................................51Ringing Reference Generator ............................ 51Non-volatile Static RAM ................................ 5123. Tl DIGITAL TRUNK CARD Brief Description .....................................53 Facilities ...........................................53 General Description ....................................53 Electrical Description ..................................54 Indicators ...........................................54 Physical Description ...................................54 TABLE 12-1LIST OF TABLES TITLE PAGE DTMF Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 LIST OF ILLUSTRATIONS FIGURE TITLE PAGE l-lDigital Card Faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2-l Main Control Card and Decryption Module . . . . . . . . . . . 5 7-l Bay Control Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 8-lMain Control Card and Interface Cards for Analog Shelf 18 9-lDigital Interface Card . . . . . . . . . . . . . . . . . . . . . . . . . . 20 IO-1Universal Card and Modules . . . . . . . . . . . . . . . . . . . . 23 16-1Loop Start/Ground Start Card and Jumper Location . . . 36 21-1Power Fail Transfer Card . . . . . . . . . . . . . . . . . . . . . . . 49 V