Panasonic Kx Taw848 PC Cprogramming Manual

							2.8 [2] System
PC Programming Manual 151
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
2.8.9 [2-6-2] Numbering Plan—Quick Dial
Quick Dialing numbers are used to call extensions or outside parties, or access certain features 
without having to dial their full numbers. It is possible to register Quick Dialing numbers that overlap 
with other registered numbers. 
For more information on flexible numbering, see 1.6.4 Flexible Numbering/Fixed Numbering in the 
Feature Manual.
Dial
Specifies the Quick Dialing number.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.9 [2-6-2] Numbering Plan—Quick Dial
Programming Manual References
None
Feature Manual References
1.14.1 Quick Dialing
Phone Number
Specifies the number to be dialed when the corresponding Quick Dialing number is used.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.8.9 [2-6-2] Numbering Plan—Quick Dial
Programming Manual References
None 
						

							2.8 [2] System
152 PC Programming Manual
Feature Manual References
1.14.1 Quick Dialing
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Feature numbers used to access various PBX features can be programmed. The following features 
are available while hearing a busy, DND, or ringback tone. Each feature must have a unique feature 
number. 
For more information on flexible numbering, see 1.6.4 Flexible Numbering/Fixed Numbering in the 
Feature Manual.
BSS / DND Override
Specifies the feature number used to notify a busy extension of a second call by Call Waiting, or call 
an extension in DND mode.
Default
1
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—C. Waiting for Call from Extension
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 2—C. Waiting for Call from Extension
Feature Manual References
1.3.9 Call Waiting Tone
1.4.8 DND (Do Not Disturb)
Executive Busy Override
Specifies the feature number used to interrupt an existing call to establish a three-party conference 
call.
Default
3
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature 
						

							2.8 [2] System
PC Programming Manual 153
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Executive Busy Override
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 3—Executive Override Deny
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
Feature Manual References
1.5.3 Executive Busy Override
Alternate Calling - Ring / Voice
Specifies the feature number used to allow a caller to change the called extensions preset call 
receiving method to ring tone or voice.
Default
*
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
None
Feature Manual References
1.9.11 Intercom Call
Message Waiting On
Specifies the feature number used to leave a Message Waiting notification.
Default
4
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting 
						

							2.8 [2] System
154 PC Programming Manual
Call Monitor
Specifies the feature number used to listen to a busy extensions conversation.
Default
5
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Call Monitor
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 3—Executive Override Deny
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
Feature Manual References
1.3.4 Call Monitor
Automatic Callback Busy
Specifies the feature number used to reserve a busy line and receive callback ringing when the line 
becomes idle.
Default
6
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
None
Feature Manual References
1.1.4 Automatic Callback Busy (Camp-on)
BSS / DND Override-2
Specifies the feature number used to notify a busy extension of a second call by Call Waiting, or call 
an extension in DND mode. This is the same setting as 
BSS / DND Override on this screen, and can 
be used to provide two methods of activating the specified features. This can be useful, for example, 
if users prefer to use a separate feature number to activate DND Override. 
						

							2.8 [2] System
PC Programming Manual 155
Default
2
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—C. Waiting for Call from Extension
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 2—C. Waiting for Call from Extension
Feature Manual References
1.3.9 Call Waiting Tone
1.4.8 DND (Do Not Disturb)
2.8.11 [2-7-1] Class of Service—COS Settings
Each extension, doorphone port, incoming call distribution group, and trunk group is assigned a Class 
of Service (COS). Certain features can be programmed to behave differently depending on the COS. 
A maximum of 64 COS levels can be programmed.
TRS
Restrictions to features related to making CO line calls can be programmed for each COS.
COS Name
Specifies the name of the COS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
None
Feature Manual References
1.3.16 COS (Class of Service) 
						

							2.8 [2] System
156 PC Programming Manual
TRS Level—Day, Lunch, Break, Night
Specifies the Toll Restriction (TRS) level for making CO line calls in each time mode.
Default
1
Value Range
1: Allows all CO line calls 
2–6: Restricts CO line calls according to the combination of the Denied and Exception Code Tables 
7: Restricts all CO line calls
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.8.5 [2-4] Week Table
2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—COS
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.1 [5-1] Doorphone—COS
2.13.1 [7-1] Denied Code
2.13.2 [7-2] Exception Code
Feature Manual References
1.17.5 TRS (Toll Restriction)
TRS Level on Extension Lock
Specifies the TRS level for making CO line calls when an extension is locked using the Extension Dial 
Lock feature.
Default
7
Value Range
1: Allows all CO line calls 
2–6: Restricts CO line calls according to the combination of the Denied and Exception Code Tables 
7: Restricts all CO line calls
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.13.1 [7-1] Denied Code 
						

							2.8 [2] System
PC Programming Manual 157
2.13.2 [7-2] Exception Code
Feature Manual References
1.5.4 Extension Dial Lock
TRS Level for System Speed Dialing
Specifies the TRSg level for making a CO line call using System Speed Dialing numbers, which 
overrides the TRS set for the current time mode.
Default
1
Value Range
1: Allows all CO line calls 
2–6: Restricts CO line calls according to the combination of the Denied and Exception Code Tables 
7: Restricts all CO line calls
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.12.1 [6-1] System Speed Dial
2.13.5 [7-5] Miscellaneous—TRS Override by System Speed Dialing
Feature Manual References
1.16.4 Speed Dialing, System
1.17.5 TRS (Toll Restriction)
CO & SMDR
COS Name
Specifies the name of the COS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings 
						

							2.8 [2] System
158 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.3.16 COS (Class of Service)
Extension-CO Line Call Duration Limit
Enables the extension-to-CO line call duration feature. The maximum call duration can be set using 
Extension-CO Duration Time on 2.9.1 [3-1-1] Trunk Group—TRG Settings.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.8.17 [2-9] System Options—Option 2—Extension - CO Call Limitation—For Incoming Call
2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—COS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.3.12 CO Line Call Limitation
Transfer to CO
Enables the transferring of calls to CO lines.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS 
						

							2.8 [2] System
PC Programming Manual 159
Feature Manual References
1.3.8 Call Transfer
Call Forward to CO
Enables the forwarding of calls to CO lines.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
Account Code Mode
Specifies whether the entry of an account code is optional or mandatory when making a CO line call.
Default
Option
Value Range
Option, Forced
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.1.2 Account Code Entry 
						

							2.8 [2] System
160 PC Programming Manual
Outgoing CO Call Printout (SMDR)
Enables the automatic recording of information about outgoing CO line calls on SMDR.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.16.1 [10-1] Main
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Extension Feature
The use of features related to extension operations can be programmed for each COS.
COS Name
Specifies the name of the COS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
None
Feature Manual References
1.3.16 COS (Class of Service)
Executive Busy Override
Enables interrupting an existing call to establish a three-party conference call.