Panasonic Kx Taw848 PC Cprogramming Manual

							2.10 [4] Extension
PC Programming Manual 351
Value Range
All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Default
1
Value Range
1–7
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—TRS
2.13 [7] TRS
Feature Manual References
1.4.4 Dial Tone Transfer
1.17.5 TRS (Toll Restriction)
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
352 PC Programming Manual
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Ext. No. / Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
None
Ext. No. / Floating Ext No. (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.1 ICD GROUP FEATURES 
						

							2.10 [4] Extension
PC Programming Manual 353
Ext. No. / Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution 
group for which messages are checked. If this cell is left empty, the paired extension will check its own 
messages only.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
Ext. No. / Floating Ext No. (for Group Fwd (Both))
Specifies the floating extension number of an incoming call distribution group for which both intercom 
and CO line calls are forwarded.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext No. (for Group Fwd (External))
Specifies the floating extension number of an incoming call distribution group for which CO line calls 
are forwarded.
Default
Not stored. 
						

							2.10 [4] Extension
354 PC Programming Manual
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext No. (for Group Fwd (Internal))
Specifies the floating extension number of an incoming call distribution group for which intercom calls 
are forwarded.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext No. (for Call Log)
Specifies the paired extensions number or the floating extension number of an incoming call 
distribution group for which call log information is displayed. If the cell is left empty, the paired 
extension will display its own call log information.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
PC Programming Manual 355
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Ext. No. / Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-out 
from.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Ext. No. / Floating Ext No. (for Hurry-up)
Specifies the floating extension number of the incoming call distribution group whose longest waiting 
call will be redirected (Manual Queue Redirection).
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer
Feature Manual References
1.9.5 ICD Group Features—Queuing 
						

							2.10 [4] Extension
356 PC Programming Manual
Ext. No. / Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the paired extensions 
mailbox.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.15 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.15 [3-7-2] VM(DPT) Group—Unit Settings
2.9.18 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox.
Default
Not stored. 
						

							2.10 [4] Extension
PC Programming Manual 357
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.15 [3-7-2] VM(DPT) Group—Unit Settings
2.9.18 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
1.19.5 Voice Mail DTMF Integration
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 One-touch Dialing buttons 
for extensions and DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.12.2 One-touch Dialing
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
358 PC Programming Manual
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked in when a Call Park button with 
Parameter Selection (for Call Park) on this screen set to Specific is pressed.
Default
0
Value Range
0–99
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.5 Call Park
Ext. No. of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record conversations using One-
touch Two-way Transfer. (For example, a secretary can record a conversation into the mailbox of a 
boss.) If the cell is left empty, the extension user must specify the number of an extension each time.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration 
						

							2.10 [4] Extension
PC Programming Manual 359
2.10.14 [4-3] DSS Console—Flexible Button—Flexible button Data 
Copy
The flexible DSS button settings of a DSS Console can be copied to different DSS Consoles. Select 
the DSS Console that has the setting to copy to other DSS Consoles from the DSS Console No./ 
Pair Extension list, then click Copy To.
Destination DSS Console
Select the number of the DSS Console and paired extension. Multiple DSS Consoles can be 
selected. To select all DSS Consoles at once, click Select All.
Maintenance Console Location
2.10.14 [4-3] DSS Console—Flexible Button—Flexible button Data Copy
Programming Manual References
2.10.13 [4-3] DSS Console—Flexible Button
Feature Manual References
None 
						

							2.11 [5] Optional Device
360 PC Programming Manual
2.11 [5] Optional Device
2.11.1 [5-1] Doorphone
The settings to establish doorphone calls can be programmed. 
To assign destinations for doorphone calls easily, click Extension Number of Destination Setting 
(see 
2.1.6 Extension Number Setting).
Physical—Slot
Indicates the slot to which the doorphone is connected (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.11.1 [5-1] Doorphone
Programming Manual References
None
Feature Manual References
1.4.10 Doorphone Call
Physical—Port
Indicates the port number to which the doorphone is connected (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.11.1 [5-1] Doorphone
Programming Manual References
None
Feature Manual References
1.4.10 Doorphone Call