Panasonic Kx Taw848 PC Cprogramming Manual

							2.10 [4] Extension
PC Programming Manual 271
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Incoming Call Display
Selects which caller information is shown on the first line of the extensions display.
Default
Caller ID Name
Value Range
Caller ID Name, CO Line Name
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.7 Display Information 
						

							2.10 [4] Extension
272 PC Programming Manual
Automatic LCD Switch when Start Talking
Enables the first line of the display to show the call duration automatically after answering a CO line 
call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.7 Display Information
Key Pad Tone
Specifies whether key pad tones are heard when dialing.
Default
On
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Automatic Answer for CO Call
Enables the extension to answer an incoming CO line call automatically after a cer tain number of 
rings without going off-hook, when Hands-free Answerback has been set on the extension. This 
setting is only effective when 
Forced Automatic Answer on this screen has been set to Off.
Default
Disable 
						

							2.10 [4] Extension
PC Programming Manual 273
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.8.1 Hands-free Answerback
Forced Automatic Answer
Specifies whether the extension automatically answers all incoming calls (both intercom and CO line 
calls) without going off-hook, regardless of the Hands-free Answerback setting.
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Flexible Key Programming Mode
Specifies whether the extension user can modify all flexible CO buttons without limitation, or only the 
One-touch Dialing buttons. When the mode is set to One-touch Dial, there is no need to enter 2 
before the number when customizing a One-touch Dialing button.
Default
No Limitation
Value Range
No Limitation, One-touch Dial
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings 
						

							2.10 [4] Extension
274 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Option 6
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None 
						

							2.10 [4] Extension
PC Programming Manual 275
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the por t is in use, the new extension number will not come into effect.
Note that extensions that will have a mailbox using a VM in DPT integration must have extension 
numbers of 2–4 digits.
Default
Starting at 101 
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent 
extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None 
						

							2.10 [4] Extension
276 PC Programming Manual
Display Lock / SVM Lock
Locks or unlocks the Incoming Call Log and Simplified Voice Message Log display (i.e., specifies 
whether other extension users can see the Incoming Call Log and SVM Log information at the 
extension).
Default
Unlock
Value Range
Unlock, Lock
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.10.7 [4-1-6] Wired Extension—Simplified Voice Message
Feature Manual References
1.3.3 Call Log, Incoming
1.16.5 SVM (Simplified Voice Message)
Paging Deny
Specifies whether paging of the extension from other extensions is enabled.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.13.1 Paging
Flash Mode during CO Conversation
Selects the function of the FLASH/RECALL button during a CO line conversation.
Default
Flash Recall 
						

							2.10 [4] Extension
PC Programming Manual 277
Value Range
EFA, Terminate, Flash Recall
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.5.1 EFA (External Feature Access)
1.6.2 Flash/Recall/Terminate
Incoming Call Log Memory
Specifies the number of incoming CO line calls that are retained in the extensions Incoming Call Log 
memory.
Default
10
Value Range
0–100
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension 
at the moment that the extension goes on-hook for the previous call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings 
						

							2.10 [4] Extension
278 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Option 7
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None 
						

							2.10 [4] Extension
PC Programming Manual 279
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the por t is in use, the new extension number will not come into effect.
Note that extensions that will have a mailbox using a VM in DPT integration must have extension 
numbers of 2–4 digits.
Default
Starting at 101 
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent 
extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None 
						

							2.10 [4] Extension
280 PC Programming Manual
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT. 
Note that the setting of this parameter is only effective when a resource for sending extension Caller 
ID is assigned in 
Extension Caller ID Resource-1, 2 for the port in 2.8.18 [2-10] Extension CID 
Settings.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18 [2-10] Extension CID Settings—Extension Caller ID Resource-1, 2
Feature Manual References
1.3.1 Caller ID
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time that the ringing for a call is delayed when the call follows immediately after 
the previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting 
in a queue is directed to an extension immediately after the previous unanswered call stops ringing), 
some SLTs require a pause, after the first call stops ringing, to receive the second calls Caller ID 
information.
 
Note that the setting of this parameter is only effective when a resource for sending extension Caller 
ID is assigned in 
Extension Caller ID Resource-1, 2 for the port in 2.8.18 [2-10] Extension CID 
Settings.
Default
0
Value Range
0–15 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18 [2-10] Extension CID Settings—Extension Caller ID Resource-1, 2
Feature Manual References
1.3.1 Caller ID