Panasonic Kx Taw848 PC Cprogramming Manual

							2.16 [10] Maintenance
PC Programming Manual 421
Default
No Print
Value Range
No Print, Print
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
1.16.1 SMDR (Station Message Detail Recording)
Print Information—Timed Reminder (Wake-up Call)
Selects whether Timed Reminder data is output on SMDR.
Default
No Print
Value Range
No Print, Print
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
2.12.9 [6-8] Hotel
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
1.17.3 Timed Reminder
Print Information—Error Log
Specifies whether PBX error log information is output to SMDR.
Default
Print
Value Range
No Print, Print 
						

							2.16 [10] Maintenance
422 PC Programming Manual
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.10.4 Local Alarm Information
1.16.1 SMDR (Station Message Detail Recording)
SMDR Options
Options—ARS Dial
Selects the type of the dialed number to be printed for a call with the ARS feature.
Default
Dial after ARS Modification
Value Range
Dial before ARS Modification: The user-dialed number
Dial after ARS Modification: The ARS modified number
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.16.1 SMDR (Station Message Detail Recording)
Options—Caller ID Number & Name
Selects the printing format of caller identifications for incoming CO line calls.
Default
Number
Value Range
None, Number, Name, Name + Number
Maintenance Console Location
2.16.1 [10-1] Main 
						

							2.16 [10] Maintenance
PC Programming Manual 423
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Options—Secret Dial
Selects the printing format of calls with a secret dial. The secret dial conceals all or part of the dialed 
number.
 
Note that selecting Dial before ARS Modification in Options—ARS Dial on this screen indicates 
the dialed numbers as dots regardless of this setting.
Default
Print ....
Value Range
Print ...., Print Dialed Number
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.11.2 MEMORY DIALING FEATURES
1.16.1 SMDR (Station Message Detail Recording)
Options—Condition Code RC/VR Print
Specifies whether the time of receiving an incoming CO line call is printed.
Default
No Print
Value Range
No Print, Print
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording) 
						

							2.16 [10] Maintenance
424 PC Programming Manual
Options—Condition Code AN/VA Print
Specifies whether the time of answering an incoming CO line call is printed.
Default
No Print
Value Range
No Print, Print
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Options—Caller ID Modification
Specifies whether Caller ID numbers are recorded on SMDR as received (before being modified by 
the PBX) or after being modified.
Default
Before Modification
Value Range
Before Modification, After Modification
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
2.12.2 [6-2] Caller ID Modification
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
RS-232C
Communication—Baud Rate
Specifies the data transmission speed from the PBX to the printer or personal computer. 
To ensure stable transmission, when changing this setting to 57600 or 115200 bps, set 
Communication—Flow on this screen to Hardware. 
						

							2.16 [10] Maintenance
PC Programming Manual 425
Default
19200 bps
Value Range
2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
2.16.1 [10-1] Main—RS-232C—Communication—Flow
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Communication—NL Code
Specifies the NL (New Line) code for the printer or personal computer. 
If the printer or personal computer automatically feeds lines with a carriage return, select CR 
(Carriage Return). If not, select CR+LF (Line Feed).
Default
CR+LF
Value Range
CR+LF, CR
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Communication—Parity Bit
Selects a parity bit code that indicates what type of parity is used to detect an error in the string of 
bits composing a character.
 
Make an appropriate selection depending on the requirements of the printer or personal computer.
Default
None
Value Range
None, Mark, Space, Even, Odd 
						

							2.16 [10] Maintenance
426 PC Programming Manual
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Communication—Word Length
Specifies the number of bits in each byte of a character. 
When connecting the KX-TAW848 Maintenance Console to the PBX using an RS-232C cable, assign 
the following values to the Serial Interface (RS-232C) port of the PBX:
 
Word Length: 8 bit, Parity Bit: None, Stop Bit: 1 bit
CAUTION
Do not use the following combinations:
Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
8 bit
Value Range
7 bit, 8 bit
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Communication—Flow
Enables the hardware flow control.
Default
None
Value Range
None, Hardware 
						

							2.16 [10] Maintenance
PC Programming Manual 427
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
None
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character. 
Select an appropriate value depending on the requirements of the printer or personal computer.
Default
1 bit
Value Range
1 bit, 2 bit
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
External Modem Command—Automatic Initialization
Specifies the command to automatically initialize an external modem when it is plugged into the Serial 
Interface (RS-232C) port of the PBX.
Default
AT&F0Q0E0V1S0=1X0&D0
Value Range
Max. 80 characters
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.13.5 PC Programming 
						

							2.16 [10] Maintenance
428 PC Programming Manual
External Modem Command—Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here is 
controlled by PT system programming (External Modem Control [801]).
Default
Not stored.
Value Range
Max. 80 characters
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.13.5 PC Programming
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the 
PBX detects a PBX error, the System Alarm button on the PT turns on red. When this button is 
pressed, the display will show the error number, and the button light will turn off automatically.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.10.4 Local Alarm Information
Daily Test Start Time—Set
Enables the daily self check of the PBX for local alarm and error log. 
						

							2.16 [10] Maintenance
PC Programming Manual 429
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.10.4 Local Alarm Information
Daily Test Start Time—Hour
Specifies the hour of the PBX daily self check start time.
Default
0
Value Range
0–23
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.10.4 Local Alarm Information
Daily Test Start Time—Minute
Specifies the minute of the PBX daily self check start time.
Default
0
Value Range
0–59
Maintenance Console Location
2.16.1 [10-1] Main 
						

							2.16 [10] Maintenance
430 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.10.4 Local Alarm Information
Remote
Remote—Analog Remote (Modem) Floating Extension Number
Specifies the floating extension number for analog remote maintenance. To enable this setting, an 
RMT card must be installed, and 
Remote—Remote Programming on this screen must be enabled.
Default
599
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.13.5 PC Programming
Remote—Remote Programming
Enables system programming, diagnosis, and data upload from a remote location.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.16.1 [10-1] Main
Programming Manual References
None
Feature Manual References
1.13.5 PC Programming