Panasonic Kx Taw848 PC Cprogramming Manual
Have a look at the manual Panasonic Kx Taw848 PC Cprogramming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 166
2.8 [2] System
166 PC Programming Manual
Programming Manual References
2.11.6 [5-4] External Relay
Feature Manual References
1.5.8 External Relay
Accept the Call from DISA
Enables reception of calls from DISA.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.4 [5-3-2] Voice Message—DISA...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-165.png "Page 166
2.8 [2] System
166 PC Programming Manual
Programming Manual References
2.11.6 [5-4] External Relay
Feature Manual References
1.5.8 External Relay
Accept the Call from DISA
Enables reception of calls from DISA.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.4 [5-3-2] Voice Message—DISA...")
![Page 167
2.8 [2] System
PC Programming Manual 167
Accept Wireless XDP Parallel Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Default
Allow
Value Range
Allow, Deny
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
Feature Manual References
1.20.3 Wireless XDP Parallel Mode
2.8.12 [2-7-2] Class of Service—External Call Block
Each COS can have different trunk groups available for making...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-166.png "Page 167
2.8 [2] System
PC Programming Manual 167
Accept Wireless XDP Parallel Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Default
Allow
Value Range
Allow, Deny
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
Feature Manual References
1.20.3 Wireless XDP Parallel Mode
2.8.12 [2-7-2] Class of Service—External Call Block
Each COS can have different trunk groups available for making...")
![Page 168
2.8 [2] System
168 PC Programming Manual
2.8.13 [2-7-3] Class of Service—Internal Call Block
Internal Call Block determines the restrictions placed on making intercom calls. The extensions,
incoming call distribution groups, and doorphones belonging to a certain COS can be programmed
to not receive intercom calls from those belonging to a certain COS.
COS Number of the Extension Which Receive the Call from Other Extension
1–64
Specifies the combinations of COS levels for which intercom calls are...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-167.png "Page 168
2.8 [2] System
168 PC Programming Manual
2.8.13 [2-7-3] Class of Service—Internal Call Block
Internal Call Block determines the restrictions placed on making intercom calls. The extensions,
incoming call distribution groups, and doorphones belonging to a certain COS can be programmed
to not receive intercom calls from those belonging to a certain COS.
COS Number of the Extension Which Receive the Call from Other Extension
1–64
Specifies the combinations of COS levels for which intercom calls are...")
![Page 169
2.8 [2] System
PC Programming Manual 169
Programming Manual References
2.15.1 [9-1] CO Line Settings—Trunk Group Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.15.2 Ring Tone Pattern Selection
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Different ring tone patterns can be selected for incoming doorphone calls depending on the
doorphone port that the calls...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-168.png "Page 169
2.8 [2] System
PC Programming Manual 169
Programming Manual References
2.15.1 [9-1] CO Line Settings—Trunk Group Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.15.2 Ring Tone Pattern Selection
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Different ring tone patterns can be selected for incoming doorphone calls depending on the
doorphone port that the calls...")
![Page 170
2.8 [2] System
170 PC Programming Manual
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Maintenance Console Location
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
None
Timed Reminder—Ring Tone...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-169.png "Page 170
2.8 [2] System
170 PC Programming Manual
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Maintenance Console Location
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
None
Timed Reminder—Ring Tone...")
![Page 171
2.8 [2] System
PC Programming Manual 171
Value Range
Single, Double, Triple, S-Double
Maintenance Console Location
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.1.4 Automatic Callback Busy (Camp-on)
Live Call Screening—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for LCS warning...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-170.png "Page 171
2.8 [2] System
PC Programming Manual 171
Value Range
Single, Double, Triple, S-Double
Maintenance Console Location
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.1.4 Automatic Callback Busy (Camp-on)
Live Call Screening—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for LCS warning...")
![Page 172
2.8 [2] System
172 PC Programming Manual
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.5.9 External Sensor
2.8.17 [2-9] System Options
Various system settings can be programmed.
Option 1
PT LCD—Date Display
Selects the order that the month and date are shown on the displays of extensions.
Default
Month-Date
Value Range
Date-Month, Month-Date...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-171.png "Page 172
2.8 [2] System
172 PC Programming Manual
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.5.9 External Sensor
2.8.17 [2-9] System Options
Various system settings can be programmed.
Option 1
PT LCD—Date Display
Selects the order that the month and date are shown on the displays of extensions.
Default
Month-Date
Value Range
Date-Month, Month-Date...")
![Page 173
2.8 [2] System
PC Programming Manual 173
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
PT LCD—Password / PIN Display
Selects whether passwords and PINs (Personal Identification Number) are hidden or shown on the
displays of extensions while being entered.
Default
Hide
Value Range
Hide, Display
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.5.6 Extension PIN (Personal Identification Number)
PT...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-172.png "Page 173
2.8 [2] System
PC Programming Manual 173
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
PT LCD—Password / PIN Display
Selects whether passwords and PINs (Personal Identification Number) are hidden or shown on the
displays of extensions while being entered.
Default
Hide
Value Range
Hide, Display
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.5.6 Extension PIN (Personal Identification Number)
PT...")
![Page 174
2.8 [2] System
174 PC Programming Manual
PT Fwd / DND—DND LED
Selects the light pattern of the FWD/DND button while the DND feature is activated.
Default
On (Solid)
Value Range
On (Solid): Red on
Flash: Slow red flashing
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.7 FWD/DND Button, Group FWD Button
1.10.1 LED Indication
PT Fwd / DND—Fwd/DND key mode...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-173.png "Page 174
2.8 [2] System
174 PC Programming Manual
PT Fwd / DND—DND LED
Selects the light pattern of the FWD/DND button while the DND feature is activated.
Default
On (Solid)
Value Range
On (Solid): Red on
Flash: Slow red flashing
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.7 FWD/DND Button, Group FWD Button
1.10.1 LED Indication
PT Fwd / DND—Fwd/DND key mode...")
![Page 175
2.8 [2] System
PC Programming Manual 175
PT Fwd / DND—Paging to DND Extension
Specifies whether extensions can receive paging when in DND mode.
Default
Do Not Page
Value Range
D o Not Pag e, Pa ge
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
2.9.6 [3-4] Paging Group
Feature Manual References
1.13.1 Paging
PT Operation—Privacy Release by SCO key
Selects the function of the S-CO...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-174.png "Page 175
2.8 [2] System
PC Programming Manual 175
PT Fwd / DND—Paging to DND Extension
Specifies whether extensions can receive paging when in DND mode.
Default
Do Not Page
Value Range
D o Not Pag e, Pa ge
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
2.9.6 [3-4] Paging Group
Feature Manual References
1.13.1 Paging
PT Operation—Privacy Release by SCO key
Selects the function of the S-CO...")
![Page 176
2.8 [2] System
176 PC Programming Manual
Value Range
No Rings, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.8.1 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when the INTERCOM, CO, or ICD Group button is
pressed while having a conversation.
Default
Disconnect
Value Range
Disable (Disconnect), Enable
Maintenance Console...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-175.png "Page 176
2.8 [2] System
176 PC Programming Manual
Value Range
No Rings, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.8.1 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when the INTERCOM, CO, or ICD Group button is
pressed while having a conversation.
Default
Disconnect
Value Range
Disable (Disconnect), Enable
Maintenance Console...")
2.8 [2] System PC Programming Manual 171 Value Range Single, Double, Triple, S-Double Maintenance Console Location 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others Programming Manual References 2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table 2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table Feature Manual References 1.1.4 Automatic Callback Busy (Camp-on) Live Call Screening—Ring Tone Pattern Plan 1–8 Specifies the ring tone pattern for LCS warning tones. Default Triple Value Range Single, Double, Triple Maintenance Console Location 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others Programming Manual References 2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table 2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table Feature Manual References 1.19.4 Voice Mail DPT (Digital) Integration External Sensor—Ring Tone Pattern Plan 1–8 Specifies the ring tone pattern for calls from an external sensor. Default Triple Value Range Single, Double, Triple Maintenance Console Location 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
2.8 [2] System 172 PC Programming Manual Programming Manual References 2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table 2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table Feature Manual References 1.5.9 External Sensor 2.8.17 [2-9] System Options Various system settings can be programmed. Option 1 PT LCD—Date Display Selects the order that the month and date are shown on the displays of extensions. Default Month-Date Value Range Date-Month, Month-Date Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References None PT LCD—Time Display Selects the time format shown on the displays of extensions. The time display format assigned here applies when setting the Timed Reminder feature. Default 12H Value Range 12H, 24H Maintenance Console Location 2.8.17 [2-9] System Options
2.8 [2] System PC Programming Manual 173 Programming Manual References None Feature Manual References 1.17.3 Timed Reminder PT LCD—Password / PIN Display Selects whether passwords and PINs (Personal Identification Number) are hidden or shown on the displays of extensions while being entered. Default Hide Value Range Hide, Display Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.5.6 Extension PIN (Personal Identification Number) PT Fwd / DND—Fwd LED Selects the light pattern of the FWD/DND button while the FWD feature is activated. Default Flash Value Range On (Solid): Red on Flash: Slow red flashing Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.10.2 [4-1-2] Wired Extension—FWD/DND 2.10.9 [4-2-2] Portable Station—FWD / DND Feature Manual References 1.6.7 FWD/DND Button, Group FWD Button 1.10.1 LED Indication
2.8 [2] System 174 PC Programming Manual PT Fwd / DND—DND LED Selects the light pattern of the FWD/DND button while the DND feature is activated. Default On (Solid) Value Range On (Solid): Red on Flash: Slow red flashing Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.10.2 [4-1-2] Wired Extension—FWD/DND 2.10.9 [4-2-2] Portable Station—FWD / DND Feature Manual References 1.6.7 FWD/DND Button, Group FWD Button 1.10.1 LED Indication PT Fwd / DND—Fwd/DND key mode when Idle Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A FWD/ DND button customized on a flexible button is always in FWD/DND Cycle Switch mode, and the mode cannot be changed.) Default FWD/DND Setting Mode Value Range FWD/DND Setting Mode: Enter programming mode for the FWD/DND setting. FWD/DND Cycle Switch Mode: Switch the FWD on/DND on/Off mode instead of entering the programming mode for the FWD/DND setting. (When there are separate FWD/DND settings for calls from CO lines and calls from extensions, mode switching cannot be performed.) Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.10.2 [4-1-2] Wired Extension—FWD/DND 2.10.9 [4-2-2] Portable Station—FWD / DND Feature Manual References 1.6.7 FWD/DND Button, Group FWD Button
2.8 [2] System PC Programming Manual 175 PT Fwd / DND—Paging to DND Extension Specifies whether extensions can receive paging when in DND mode. Default Do Not Page Value Range D o Not Pag e, Pa ge Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.10.2 [4-1-2] Wired Extension—FWD/DND 2.10.9 [4-2-2] Portable Station—FWD / DND 2.9.6 [3-4] Paging Group Feature Manual References 1.13.1 Paging PT Operation—Privacy Release by SCO key Selects the function of the S-CO button during a CO line call. Default Enable Value Range Enable: Pressing the S-CO button activates the Privacy Release feature Disable: Pressing the S-CO button switches the information shown on the PT display. Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.13.10 Privacy Release PT Operation—Automatic Answer for Call from CO after Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is established automatically when it receives a call from a CO line. Default 1 Ring
2.8 [2] System 176 PC Programming Manual Value Range No Rings, 1 Ring, 2 Rings, 3 Rings Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.8.1 Hands-free Answerback PT Operation—Automatic Hold by ICM / CO / ICD Group key Selects whether calls are disconnected or held when the INTERCOM, CO, or ICD Group button is pressed while having a conversation. Default Disconnect Value Range Disable (Disconnect), Enable Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.10.4 [4-1-4] Wired Extension—Flexible Button 2.10.10 [4-2-3] Portable Station—Flexible Button Feature Manual References 1.3.2 Call Hold PT Operation— Hold Key Mode Selects which extensions can retrieve a held call or a call that is transferred by Call Transfer without Announcement feature. Default Hold Value Range Hold: Any extension can retrieve a held call. Exclusive Hold: Only the holding extension can retrieve a held call. Maintenance Console Location 2.8.17 [2-9] System Options
2.8 [2] System PC Programming Manual 177 Programming Manual References None Feature Manual References 1.3.2 Call Hold Option 2 Extension Clear—Call Waiting Specifies whether the Call Waiting setting is cleared when Extension Feature Clear is performed. Default Clear Value Range Clear, Do not clear Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.5.5 Extension Feature Clear Extension Clear—Fwd/DND Specifies whether the FWD/DND setting is cleared when Extension Feature Clear is performed. Default Clear Value Range Clear, Do not clear Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.5.5 Extension Feature Clear
2.8 [2] System 178 PC Programming Manual Extension Clear—Hot Line (Pickup Dial) Specifies whether the Hot Line setting is cleared when Extension Feature Clear is performed. Default Clear Value Range Clear, Do not clear Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.5.5 Extension Feature Clear CODEC—System CODEC Selects the CODEC type for PSs. Default µ-Law Value Range A-Law, µ-Law Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References None Redial—Save Dial After Connection to Redial Memory Specifies whether any digits dialed after the called party answers (for example, to access a specific extension within another company) are also saved as part of the redial number. Default Enable Value Range Disable, Enable
2.8 [2] System PC Programming Manual 179 Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.15.1 Redial, Last Number Extension - CO Call Limitation—For Incoming Call Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned on a trunk group basis. Default Disable Value Range Disable, Enable Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References 2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Extension-CO Line Call Duration Limit 2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—Extension-CO Duration Time Feature Manual References 1.3.12 CO Line Call Limitation Automatic Time Adjustment—by Caller ID (FSK) Enables the PBX to adjust its clock every day according to the time information that the network provides with the first call after 3:05 AM. Default Enable Value Range Disable, Enable Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None
2.8 [2] System 180 PC Programming Manual Feature Manual References 1.1.7 Automatic Time Adjustment Option 3 Confirmation Tone—Tone 1 : Doorphone / Called by Voice Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a doorphone when the doorphone button is pressed, or from a PT when it receives a call in voice-calling mode. Default Enable Value Range Disable, Enable Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.3.14 Confirmation Tone 1.4.10 Doorphone Call Confirmation Tone—Tone 2 : Paged / Automatic Answer Enables the PBX to send Confirmation Tone 2. Confirmation Tone 2 is heard from a PT when it receives a call in Hands-free Answerback mode, or paging. Default Enable Value Range Disable, Enable Maintenance Console Location 2.8.17 [2-9] System Options Programming Manual References None Feature Manual References 1.3.14 Confirmation Tone 1.8.1 Hands-free Answerback 1.13.1 Paging