Canon Imageprograf Ipf8300 User Guide

							5.Access the  Main pane.
6.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the  Page Setup  pane.
10.Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options 
>
 Printing at full size 
>iPF8300Borderless Printing at Actual Size (Mac OS X)393
 
						

							11.Confirm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  10 in. (254.0mm).Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
12. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  10"x12" - Borderless.
13.Confirm the print settings, and then click  MPrint  to start printing.
Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Enhanced Printing Options 
>
 Printing at full size 
>Borderless Printing at Actual Size (Mac OS X)iPF8300394
 
						

							Borderless Printing
Borderless Printing on Paper of Equivalent Size .............................................................................................. 95
Borderless Printing by Resizing Originals to Match the Paper Size (Windows) ...........................................96
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) ..........................................98
 
Borderless Printing by Resizing Originals to Fit the Roll Width .......................................................................102
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) .................................................103
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) ...............................................105
 
Borderless Printing on Paper of Equivalent Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a
surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print
documents without the margin, so that the printed image covers the entire surface of the paper.
Important• Borderless printing is only available with rolls.
• Paper  you  can  use  for  borderless  printing  is  restricted  to  particular  types  of  paper  and  rolls  of  particular
widths.  For  information  on  types  of  paper  compatible  with  borderless  printing,  refer  to  the  Paper  Reference
Guide. (Refer to " Types of Paper
→P.768")
• Paper  incompatible  with  the  printer's  auto  cut  function  can  be  printed  without  borders  on  the  left  and  right
sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering origi-
nals, and printing cut lines on rolls.
• If  Fit Paper Size  or Print Image with Actual Size  (Windows only) is selected when performing borderless
printing,  Rotate Page 90 degrees (Conserve Paper)  cannot be selected.
• When  borderless  printing  is  used,  the  edge  of  the  paper  is  cut  during  printing.  Thus,  ink  density  may  be
slightly uneven at the edges. If you require higher image quality, specify  No in  Auto Cut  in the printer driv-
er. In this case, the paper can be printed without borders on the left and right sides only. Cut the printed docu-
ment ejected from the printer, then use scissors to cut away the edges on the top and bottom.
• By  factory  default,  the  ink  drying  time  is  disabled  for  all  paper.  When  you  are  using  paper  that  takes  longer
for  ink  to  adhere  for  borderless  printing  and  the  Cutter  Unit  touches  printing  surfaces  that  are  not  dry  yet,  it
may  damage  the  paper  or  the  edge  of  the  document  that  is  cut,  depending  on  frequency  of  use.  In  this  case, follow these steps to change the ink drying time.
• On the  Main sheet of the printer driver, click  Settings in Media Type .
• Select the ink drying time in the  Between Pages list of Drying Time .
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing on Paper of Equivalent Size395
 
						

							Fit Paper Size
Enlarge or reduce the original to match the size of the paper you are using.Note• The  printer  driver  automatically  enlarges  originals  3  mm  (0.12  in)  past  the  dimensions  of  the  paper  on  each
side. The 3 mm portion beyond the edge on each side is not printed.
For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to the follow-
ing topics, as appropriate for your computer and operating system.
•Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
→P.96
• Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
→P.98
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
•Document: Any type
• Page size: 10×12 inches (254.0×304.8 mm)
• Paper: Roll
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1. In the application, create an original that takes up the entire space of the paper size.
Note•If  you  can  specify  the  margin,  as  in  Microsoft  Word,  set  the  margin  at  0  mm.  For  instructions  on
specifying the margin, refer to the software documentation.
2. Choose  Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
Enhanced Printing Options 
>
 Borderless Printing 
>Borderless Printing by Resizing Originals to Match the Paper Size (Windows)iPF8300396
 
						

							4.Make sure the  Main sheet is displayed.
5.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
6. Select the print target in the  EPrint Target  list.
7. Click the  Page Setup  tab to display the  Page Setup sheet.
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing by Resizing Originals to Match the Paper Size (Windows)397
 
						

							8.In the  APage Size  list, click the size of the original as specified in the application. In this case, click  10"x12".
9. Select and click a roll paper in the  LPaper Source  list.
10. Select the  BBorderless Printing  check box to display the  Information dialog box.
11.Select the width of the loaded roll in the  Roll Paper Width list—in this case, click  10-in. Roll (254.0mm).
12. Click OK to close the  Information  dialog box.
13. In CBorderless Printing Method , click DFit Paper Size .
14. Click Match Page Size  in the GPaper Size  list.
15. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
•Document: Any Type
• Page size: 10×12 inches (254.0×304.8 mm)
Enhanced Printing Options 
>
 Borderless Printing 
>Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)iPF8300398
 
						

							•Paper: Roll paper
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
 
1. This sets the  BFormat for  and CPaper Size .Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu.
2.Select the printer in the  APrinter  list.
3. In the  FPaper Size  list, click the size of the original. In this case, click  10"x12".
Note•All sizes are available in borderless printing if you resize originals to match the paper size.
4. If  you  configured  the  settings  using  the  Page  Attributes dialog  box,  click  FOK   to  close  the  dialog  box,  and  then
select  Print from the application software menu.
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)399
 
						

							5.Access the  Main pane.
6.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the  Page Setup  pane.
10.Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options 
>
 Borderless Printing 
>Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)iPF83003100
 
						

							11.Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  10 in. (254.0mm).Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
12. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  10"x12".
13.On the  Page Setup  pane, select the  DEnlarged/Reduced Printing  check box.
14. Select the  HBorderless Printing  check box.
15. Click EFit Paper Size  under DEnlarged/Reduced Printing .
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)3101
 
						

							16.In IPaper Size , click the paper size. In this case, click  10"x12" - Borderless.
17. Confirm the print settings, and then click  MPrint  to start printing.Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Borderless Printing by Resizing Originals to Fit the Roll Width
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a
surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print
documents without the margin, so that the printed image covers the entire surface of the paper.
Important• Borderless printing is only available with rolls.
• Paper  you  can  use  for  borderless  printing  is  restricted  to  particular  types  of  paper  and  rolls  of  particular
widths.  For  information  on  types  of  paper  compatible  with  borderless  printing,  refer  to  the  Paper  Reference
Guide. (See " Types of Paper
→P.768")
• Paper  incompatible  with  the  printer's  auto  cut  function  can  be  printed  without  borders  on  the  left  and  right
sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering origi-
nals, and printing cut lines on rolls.
• If  Fit Paper Size  or Print Image with Actual Size  (Windows only) is selected when performing borderless
printing,  Rotate Page 90 degrees (Conserve Paper)  cannot be selected.
• When  borderless  printing  is  used,  the  edge  of  the  paper  is  cut  during  printing.  Thus,  ink  density  may  be  un-
even  at  the  edges.  If  you  require  higher  image  quality,  specify  No  in  Auto  Cut  in  the  printer  driver.  In  this
case, the paper can be printed without borders on the left and right sides only. After ejecting and cutting the
printed document, use scissors to cut away the top and bottom edges.
• By  factory  default,  the  ink  drying  time  is  disabled  for  all  paper.  When  you  are  using  paper  that  takes  longer
for  ink  to  adhere  for  borderless  printing  and  the  Cutter  Unit  touches  printing  surfaces  that  are  not  dry  yet,  it
may  damage  the  paper  or  the  edge  of  the  document  that  is  cut,  depending  on  frequency  of  use.  In  this  case, follow these steps to change the ink drying time.
• On the  Main sheet of the printer driver, click  Settings in Media Type .
• Select the ink drying time in the  Between Pages list of Drying Time .
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 
>
 Borderless Printing 
>Borderless Printing by Resizing Originals to Fit the Roll WidthiPF83003102