Canon Imageprograf Ipf8300 User Guide

							5.Access the  Layout pane.
6.Click  4 in the  APages per Sheet  list.
Note•You  can  choose  the  layout  order  and  specify  a  boundary  line  for  the  four  pages  in  BLayout  Direc-
tion  and  CBorder .
7.Access the  Main pane.
8.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
9. Make your selection in the  EPrint Target  list.
10. Make your selection in the  FPrint Quality  list.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>iPF8300Printing Multiple Pages Per Sheet (Mac OS X)3143
 
						

							11.Access the  Page Setup  pane.
12.Select and click a roll paper in the  APaper Source  list.
13. Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  ISO A2/A3 (420.0mm) .
Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>Printing Multiple Pages Per Sheet (Mac OS X)iPF83003144
 
						

							14.Make sure  CPage Size  shows the original size as specified in  CPaper Size  in the Page Attributes  dialog box—in
this case,  ISO A3.
15.Confirm the print settings, and then click  MPrint  to start printing.
Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Printing Posters in Sections
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a post-er larger than the maximum supported paper size of the printer.
Page Layout
Choose poster printing.
Important• When  printing  using  this  function,  the  Print  Centered, Watermark , No  Spaces  at  Top  or  Bottom  (Con-
serve Paper) , and Page Options  settings are disabled.
For instructions on printing large posters, refer to the following topics, as appropriate for your computer and operating sys-
tem.
•Printing Large Posters (Windows)
→P.146
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>iPF8300Printing Posters in Sections3145
 
						

							Note•This method of poster printing is supported in Windows.
Printing Large Posters (Windows)
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a post- er larger than the maximum supported paper size of the printer. This topic describes how to enlarge an A2 original for print-
ing it in sections on four sheets, based on the following example.
•Document: Poster
• Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
• Paper: Sheets
• Paper Size: A2 (420.0 × 594.0 mm [16.5 × 23.4 in])
1. Choose  Print in the application menu.
2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
3. Make sure the  Main sheet is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded.
5. Click  Poster  in the  EPrint Target  list.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>Printing Large Posters (Windows)iPF83003146
 
						

							6.Click the  Page Setup  tab to display the  Page Setup sheet.
7.In APage Size , click the size of the original as specified in the application. In this case, click  ISO A2.
8. Click  Cut Sheet  in the LPaper Source  list.
9. Click the  Layout tab to display the  Layout sheet.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>iPF8300Printing Large Posters (Windows)3147
 
						

							10.Select the  APage Layout  check box.
11. Click Poster (2 x 2)  in the APage Layout  list.Note•Follow the steps below to print only a portion of the poster as divided for printing.
• Click  BSet  under  APage Layout  to display the  Pages to Print  dialog box.
• On the  Pages to Print  dialog box, clear the check boxes of the portion you do not want to print.
• Click  OK to close the  Pages to Print  dialog box.
12.Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>Printing Large Posters (Windows)iPF83003148
 
						

							Centering originals
Printing Originals Centered on Rolls ............................................................................................................... 149
Printing Originals Centered on Rolls (Windows) ......................................................................................... 149
Printing Originals Centered on Rolls (Mac OS X) ....................................................................................... 151
 
Printing Originals Centered on Sheets ............................................................................................................ 155
Printing Originals Centered on Sheets (Windows) ...................................................................................... 155
Printing Originals Centered on Sheets (Mac OS X) .................................................................................... 158
Printing Originals Centered on Rolls
You can print originals centered on a page—for example, if the paper is larger than the original, or if you are reducing the
original.
Centering originals relative to roll paper width
If you use originals smaller than the roll paper width, you can center them relative to the width when printing.
Print Centered
Aligns the center of the original with the center of the roll, relative to the width.
For instructions on centering originals when printing on rolls, refer to the following topics, as appropriate for your computer
and operating system.
•Printing Originals Centered on Rolls (Windows)
→P.149
• Printing Originals Centered on Rolls (Mac OS X)
→P.151
Printing Originals Centered on Rolls (Windows)
This topic describes how to center originals before printing on rolls based on the following example. •Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Plain Paper
• Roll width: A3/A4 roll (297.0 mm [11.7 in])
1. Choose  Print in the application menu.
2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
Enhanced Printing Options 
>
 Centering originals 
>iPF8300Printing Originals Centered on Rolls3149
 
						

							3.Make sure the  Main sheet is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Select the print target in the  EPrint Target  list.
6. Click the  Page Setup  tab to display the  Page Setup sheet.
Enhanced Printing Options 
>
 Centering originals 
>Printing Originals Centered on Rolls (Windows)iPF83003150
 
						

							7.In  the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4 or
Letter (8.5"x11") .
8. Select and click a roll paper in the  LPaper Source  list.
9. Select the width of the loaded roll in the  MRoll Paper Width  list—in this case, ISO A3/A4 Roll (297.0mm) .
10. Click the  Layout tab to display the  Layout sheet.
11.Select the  EPrint Centered  check box.
12. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Printing Originals Centered on Rolls (Mac OS X)
This topic describes how to center originals before printing on rolls based on the following example. •Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
 
Enhanced Printing Options 
>
 Centering originals 
>iPF8300Printing Originals Centered on Rolls (Mac OS X)3151
 
						

							1.This sets the  BFormat for  and CPaper Size .Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu.
2.Select the printer in the  APrinter  list.
3. In the  FPaper Size  list, click the size of the original. In this case, click  ISO A4.
4. If  you  configured  the  settings  using  the  Page  Attributes dialog  box,  click  FOK   to  close  the  dialog  box,  and  then
select  Print from the application software menu.
Enhanced Printing Options 
>
 Centering originals 
>Printing Originals Centered on Rolls (Mac OS X)iPF83003152