Canon Imageprograf Ipf8300 User Guide

							When all actions in the sequence are finished, the instruction screen for the next step is displayed.
･  Example: Ink tank replacement
Printer Parts 
>
 Control Panel 
>iPF8300Checking Instructions During Printer Operations9933
 
						

							Note•During a continuous display of instructions, you can press the  ◀ button to pause the instructions on the cur-
rent screen.
Press  the  ◀  or  ▶  button  to  display  the  previous  or  next  screens.  If  you  do  not  press  the  ◀  or  ▶ button
within 30 seconds, continuous display is resumed. Press the  OK button to display the instruction screen for the next step.
Printer Parts 
>
 Control Panel 
>Checking Instructions During Printer OperationsiPF83009934
 
						

							Hard Disk
Printer Hard Disk Operations .......................................................................................................................... 935
 
Checking the Free Hard Disk Space ............................................................................................................... 936
Erasing Data on the Printer's Hard Disk .......................................................................................................... 938
Printer Hard Disk Operations
Printer hard disk operations are available through the Control Panel and in the printer driver, imagePROGRAF Print Plug-
In, RemoteUI, imagePROGRAF Status Monitor, and imagePROGRAF Printmonitor.
The hard disk operations available through each interface are as follows.
Operation
Printer Driv-
er or image- PROGRAF
Print Plug-In
image-
PROGRAF
Status Moni-
tor or image- PROGRAF
Printmonitor
Remo- teUIControlPanel
Saving print jobsPrintYesNoNoNoSave in mail boxYesNoNoNoSave data before printing(*1)YesNoNoNoPrint without saving jobs in
the shared mailboxNoNoNoYesSave print jobs sent from
sources other than the printer
driverNoNoNoYesOperations with saved
jobsPrint saved jobsNoYesYesYesDelete saved jobsNoYesYesYesJob queue managementDisplay job queueNoYesYesYesDeleteNoYesYesYesPriorityNoYesYesYesMail box managementMove saved jobsNoYesYesNoModify saved jobsNoYesYesNoModify mail boxesNoYesYesNoPrint a list of saved jobsNoNoNoYesDisplay a list of saved jobsNoYesYesYesOther operationsDisplay free hard disk spaceNoYesYesYesInitialize hard diskNoNoNoYesError recoveryNoNoNoYesDisplay error messagesNoYesYesYes
*1: This option is available in combination with  Print. Print jobs are saved and then printed.
Printer Parts 
>
 Hard Disk 
>iPF8300Printer Hard Disk Operations9935
 
						

							Checking the Free Hard Disk Space
Check the space available on the printer's hard disk as follows.
This operation is available from the Control Panel, in RemoteUI, imagePROGRAF Status Monitor, and imagePROGRAF
Printmonitor.
Using the Control Panel
1. On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Job tab (
).
Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button.
The  Job Menu  is displayed.
3. Press  ▲ or  ▼ to select  HDD Information , and then press the  OK button.
 
 
Using RemoteUI
To view the box list, select  Stored Job in Job Management. On the  Stored Job page, the free hard disk space is shown in
the upper-right corner when boxes are listed.
For details, refer to the RemoteUI help file.
 
 
Printer Parts 
>
 Hard Disk 
>Checking the Free Hard Disk SpaceiPF83009936
 
						

							Using imagePROGRAF Status Monitor
The  Hard Disk  sheet shows the free hard disk space.
For details, refer to the imagePROGRAF Status Monitor help file.
 
 
Using imagePROGRAF Printmonitor
The  Hard Disk  pane shows the free hard disk space.
Printer Parts 
>
 Hard Disk 
>iPF8300Checking the Free Hard Disk Space9937
 
						

							For details, refer to the imagePROGRAF Printmonitor help file.
Erasing Data on the Printer's Hard DiskWhen erasing all data on the hard disk, choose from the following three options.
This operation is only available from the Control Panel.
Erasure MethodDetailsHigh
SpeedErases file management data for print job data stored on the printer's hard disk. Choose this method for relatively fast erasure. Because only the file management data is erased, the print job data itself is not
erased. Note that it may be possible to read this data using commercial data recovery software.Secure
High Spd.Overwrites the entire hard disk with random data. No verification is performed to check if the data was
correctly written. Choose this method to erase highly confidential data. Note that it may be possible to
read the overwritten data using specialized data recovery tools.SecureOverwrites the entire hard disk with 00, FF, and random data (one time each). Verification is performed
to check if the data was correctly written. Choose this method to erase especially confidential data. It is
virtually impossible to recover the overwritten data. Conforms to the DoD5220.22-M standard of the U.S.
Department of Defense.Note• For a more secure method of preventing data recovery, we recommend physically or magnetically destroying
the hard disk. In this case, the hard disk can no longer be used.
• Erase HDD Data  is not available if there is a job queue.
Additionally, print jobs are not processed during execution of  Erase HDD Data.
1.On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Settings/Adj. tab ().
Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button.
The  Set./Adj. Menu  is displayed.
3. Press  ▲ or  ▼ to select  System Setup , and then press the  OK button.
4. Press  ▲ or  ▼ to select  Erase HDD Data , and then press the  OK button.
Printer Parts 
>
 Hard Disk 
>Erasing Data on the Printer's Hard DiskiPF83009938
 
						

							5.Press  ▲  or  ▼  to  select  High  Speed , Secure  High  Spd. ,  or Secure ,  and  then  press  the  OK  button  to  display  the
confirmation screen.Note• If a password has been set on the printer, the  Admin.Pswd screen is displayed. In this case, enter the
password and press the  OK button to go to the next step.
• As for the time required for deletion, confirm it on the Control Panel. However, when  High Speed is
selected, this finishes in several seconds.
6. Press the  OK button to start erasure.
After the printer hard disk is erased, the printer automatically restarts.
Printer Parts 
>
 Hard Disk 
>iPF8300Erasing Data on the Printer's Hard Disk9939
 
						

							Optional accessories
Roll Holder Set ................................................................................................................................................ 940
Media Take-up Unit ......................................................................................................................................... 940
Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-44 is for use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core.   (See "Attaching the
Roll Holder to Rolls .")
→P.774
• Roll Holder Set RH2-44
•Roll Holder (for 2- and 3-inch paper cores)
•Attachments
Using the 2-Inch Paper Core AttachmentUsing the 3-Inch Paper Core Attachment2-Inch Paper Core Attachment3-Inch Paper Core Attachment #13-Inch Paper Core Attachment #2
Media Take-up Unit
Automatically winds documents printed on rolls.
Printer Parts 
>
 Optional accessories 
>Roll Holder SetiPF83009940
 
						

							•Media Take-up Unit TU-06Note•For instructions on installing the Media Take-up Unit, refer to the Media Take-up Unit Setup Guide.
• For information on the types of paper compatible with the Media Take-up Unit, refer to the Paper Reference
Guide.
• For Media Take-up Unit instructions,  see "Using the Media Take-up Unit (Optional) ."
→P.821
Printer Parts 
>
 Optional accessories 
>iPF8300Media Take-up Unit9941
 
						

							Printer Specifications
Specifications .................................................................................................................................................. 942
Print Area ........................................................................................................................................................ 945
Specifications
Important•This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply100–120 V AC (50/60 Hz), 220–240
V AC (50/60 Hz)Power consumptionDuring operation190 W max.Sleep mode100–120 V: 5 W max.
220–240 V: 6 W max.Off1 W max. ( *1→P.942)Operating noise ( *2→P.942)During operation (sound pressure
level/LWAd)Approx. 50 dB (A) max. (6.6 bels or
less)StandbyApprox. 35 dB (A) max.Operating environmentTemperature15–30°C (59–86°F)Humidity10–80%, non-condensingDimensions (W × D × H)Printer and Stand (including the Roll
Holder and Output Stacker )1,893×975×1,144 mm
(74.5×38.4×45.0 in)WeightPrinter and Stand (not including the Printhead and ink tanks)Approx. 141 kg (310.8 lb)Space for installation (W × D × H)Printer only2,293×1,675×1,500 mm
(90.3×65.9×59.1 in)Applicable standardsInternational Energy Star Program,
Law on Promoting Green Purchas-
ing, GPN, RoHS, Eco Declaration,
WEEE, U.S. presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the
printer and unplug the power cord.
*2: Calculation based on ISO 7779. Operating conditions: On the  Main sheet of the printer driver,  Media Type >
Plain Paper,  Advanced Settings  > Print Priority  > Line Drawing/Text , and Print Quality  > Standard .
Printing performance
Print methodBubblejetMaximum resolution2400 dpi horizontally ( *1→P.943) × 1200 dpi verticallyPrintheadPF-05 (2)
Printer Parts 
>
 Printer Specifications 
>SpecificationsiPF83009942