Canon Imageprograf Ipf8300 User Guide

							4.The names of media information files in the folder you selected in the  Open dialog box are displayed under  Media
Information  File   in  the Add  Media  Type   dialog  box.  Select  the  check  boxes  of  paper  to  add  and  click  the  OK
button.Important• If  Master Media Information File  is displayed as the  Type of the  Media Information File , the me-
dia  type  display  order  and  media  type  display/non-display  settings  are  initialized.  Reconfigure  these
after added the master media information file.
5. Click  OK when the confirmation message is displayed.
6. In the  Edit Media Types  dialog box, click the  Update button.
Mac OS X Software 
>
 Media Configuration Tool 
>iPF8300Adding Media Types5683
 
						

							The Update  Media  Types   wizard  is  started  at  this  point.  For  details  on  the  procedure  to  update  paper  information
using the  Update Media Types  wizard, see "Updating Media Types ."
→P.692
Important•Be sure to click the Update button. If you do not, your changes will not be applied to the printer and
printer driver.
Changing Media Names
1. Open the 
Edit Media Types  dialog box.
Mac OS X Software 
>
 Media Configuration Tool 
>Changing Media NamesiPF83005684
 
						

							2.In the  Media Type  list, select the name to change.
Click the  Rename button.
3.The Rename Media  dialog box is displayed.
Edit the names in  Name in Printer Driver  and Name on Control Panel  and click the OK button.
Note•To restore the original names, click the  Restore button.
Mac OS X Software 
>
 Media Configuration Tool 
>iPF8300Changing Media Names5685
 
						

							4.In the  Edit Media Types  dialog box, click the  Update button.
The Update  Media  Types   wizard  is  started  at  this  point.  For  details  on  the  procedure  to  update  paper  information
using the  Update Media Types  wizard, see "Updating Media Types ."
→P.692
Important•Be sure to click the Update button. If you do not, your changes will not be applied to the printer and
printer driver.
Deleting Media Types You Have Added
1. Open the  Edit Media Types  dialog box.
Mac OS X Software 
>
 Media Configuration Tool 
>Deleting Media Types You Have AddediPF83005686
 
						

							2.In the  Media Type  list, select the name of the media to delete.
Click the  Delete button.Note•Only paper for which  Status in the  Media Type  is Add  can be deleted.
3. In the  Edit Media Types  dialog box, click the  Update button.
Mac OS X Software 
>
 Media Configuration Tool 
>iPF8300Deleting Media Types You Have Added5687
 
						

							The Update  Media  Types   wizard  is  started  at  this  point.  For  details  on  the  procedure  to  update  paper  information
using the  Update Media Types  wizard, see "Updating Media Types ."
→P.692
Important•Be sure to click the Update button. If you do not, your changes will not be applied to the printer and
printer driver.
Switching Media Types Display Show/Hide
1. Open the 
Edit Media Types  dialog box.
Mac OS X Software 
>
 Media Configuration Tool 
>Switching Media Types Display Show/HideiPF83005688
 
						

							2.In the  Media Type  list, select the name of the media to switch off or on for display.
Click the  Show/Hide  button.
The selected paper is alternately shown or hidden.Note• The names of media switched for non-display appear grayed out in the  Media Type list.
• Each  time  you  click  the  Show/Hide  button,  the  display  mode  cycles  from  showing  both  the  printer
driver and printer panel, to hiding both the printer driver and printer panel, and then to showing only the printer panel.
3. In the  Edit Media Types  dialog box, click the  Update button.
Mac OS X Software 
>
 Media Configuration Tool 
>iPF8300Switching Media Types Display Show/Hide5689
 
						

							The Update  Media  Types   wizard  is  started  at  this  point.  For  details  on  the  procedure  to  update  paper  information
using the  Update Media Types  wizard, see "Updating Media Types ."
→P.692
Important•Be sure to click the Update button. If you do not, your changes will not be applied to the printer and
printer driver.
Changing the Display Order of Media Types
1. Open the 
Edit Media Types  dialog box.
Mac OS X Software 
>
 Media Configuration Tool 
>Changing the Display Order of Media TypesiPF83005690
 
						

							2.Select the paper in the  Media Type list for which to change the display order, and then click the buttons to move the
item (
 or ).
The selected item moves one line up or down for every button click.
3. In the  Edit Media Types  dialog box, click the  Update button.
The Update  Media  Types   wizard  is  started  at  this  point.  For  details  on  the  procedure  to  update  paper  information
using the  Update Media Types  wizard, see "Updating Media Types ."
→P.692
Important•Be sure to click the Update button. If you do not, your changes will not be applied to the printer and
printer driver.
Mac OS X Software 
>
 Media Configuration Tool 
>iPF8300Changing the Display Order of Media Types5691
 
						

							Updating Media Types
Clicking the  Update button on the  Edit Media Types  dialog box opens the  Update Media Types  wizard. You can use this
wizard to apply new information about print media in the printer and in the printer driver. The procedures for updating the media information with the  Update Media Types wizard are as follows.Important•When  you  update  the  media  type  information,  perform  the  same  update  on  all  of  the  PCs  that  are  using  that
printer.
1. Confirm the printer, where media type information is to be updated, to be displayed in  Printer in the Update Media
Types - Select Printer  dialog box, and then click the  Next button.
2.
Communication with the printer starts and the following dialog box is displayed.
Mac OS X Software 
>
 Media Configuration Tool 
>Updating Media TypesiPF83005692