Canon Imageprograf Ipf8300 User Guide

							3.On the  Main sheet, click on the  Open Preview When Print Job Starts  check box.
Click the  OK button to save the settings.Note•Your printer is depicted in the lower-left area of this screen.
4. On the  Print dialog box in the apllication software, click the  Print button.
5. Preview main window is displayed.
Windows Software 
>
 Preview 
>iPF8300Starting Preview4243
 
						

							Preview Main WindowThe Preview main window consists of the menu and tool bars, preview and dialog area and status bar.Note• You can use the  View menu to show or hide the tool bar.
Menu Bar
This allows you to select menus required for operations.
Tool Bar
This allows you to select tool buttons required for major operations.
Windows Software 
>
 Preview 
>Preview Main WindowiPF83004244
 
						

							Preview Area
You can check the settings you made in this area.
Dialog Area
This allows you to set the print conditions and perform a print job.
Windows Software 
>
 Preview 
>iPF8300Preview Main Window4245
 
						

							For more information about Dialog Area, see "Dialog Area ."→P.247
Status Bar
This shows the message,  Pages and Output Size .
Windows Software 
>
 Preview 
>Preview Main WindowiPF83004246
 
						

							Dialog AreaYou can select the layout and print on the center.
Media Type  / Paper Source  /Paper Size
You can confirm the information that is set.
 
Layout Selection
You can print which conserves paper by selecting the layout.
For more information about  Layout Selection, see " Printing with Selecting the Layout ."
→P.251
 
Center Originals Across Roll
You can print on the center of the media loaded in the printer.
For more information about  Center Originals Across Roll , see " Print on the Center ."
→P.253
Note•Available only if rolls are selected in  Paper Source.
Windows Software 
>
 Preview 
>iPF8300Dialog Area4247
 
						

							No Spaces at Top or Bottom
You can save paper on not to feed roll paper for the empty spaces when the print data contains spaces at the top or bottom.
For more information about  No Spaces at Top or Bottom , see " Not Print Spaces at the Top/Bottom ."
→P.254
Note•Available only if rolls are selected in  Paper Source.
Print Button
Click the button to start printing.  
Cancel  Button
Click the button to stop printing.  
Printer Information
You can confirm the information acquired from the printer.
 
Update Printer Information  Button
Click the button to update the printer information with connecting to the printer.
 
Status Monitor  Button
Click the button to start  Status Monitor.
 
Enlarge/Reduce the screen display
You can enlarge or reduce the screen display when you select  Zoom from the  View menu.
SettingDetailsFit ScreenDisplay all.Fit to WidthDisplay to the width of the paper.ReduceDisplay at half of the standard size.StandardDisplay at the standard size.EnlargeDisplay with the double of the standard size.Enlarge MoreDisplay with the triple of the standard size.Note•This item can be selected even if you have clicked the  ▼ button in the toolbar  Zoom.
Moving a Page
You can move a page to display when you select  Go to Page from the View menu.
Windows Software 
>
 Preview 
>Enlarge/Reduce the screen displayiPF83004248
 
						

							SettingDetailsFirst PageGo to the first page.Previous PageGo to the previous page.Next PageGo to the next page.Last PageGo to the last page.Go To PageGo to the specified page.Note
•You can also move a page by clicking  on the tool bar.
Using the ruler
You can confirm the layout with using the ruler. •Switching the ruler Show/Hide
In the  View menu, select  Ruler to switch the ruler Show/Hide.
 
• Changing the ruler unit
You can set the ruler unit when you select  Units from the  View menu.
SettingDetailsmmUse mm as the ruler unit.inchUse inches as the ruler unit.
Priority setting for rotating 90 degrees
You can select  Rotate 90 Degrees If Possible  or Use Driver Settings  from the Options menu.
SettingDetailsRotate 90 Degrees If PossibleRotates pages in portrait orientation 90 degrees before printing. Pages are only ro-
tated if they can fit lengthwise across the roll.Use Driver SettingsFollows printer driver settings when determining whether to rotate pages.
Windows Software 
>
 Preview 
>iPF8300Using the ruler4249
 
						

							Selecting Rotate 90 Degrees If Possible  or Placing a checkmark for Rotate Page 90 degrees (Conserve Paper)  on the
printer driver
Selecting  Use Driver Settings
 
Windows Software 
>
 Preview 
>Priority setting for rotating 90 degreesiPF83004250
 
						

							Printing with Selecting the Layout
You can print which conserves paper by selecting the layout.
1. In Layout Selection , click the layout button to use.ButtonDetailsUpper Button
Turn at the position of .
Right Button
Turn at the position of .
Left Button
Turn at the position of .
Windows Software 
>
 Preview 
>iPF8300Printing with Selecting the Layout4251
 
						

							ButtonDetailsLower Button
Turn at the position of .
Note•Right  Button   or Left  Button   can  be  selected  only  when  the  rotated  pages  can  fit  lengthwise  across
the roll.
• By clicking  Right Button  or Left Button , you can save paper by printing in landscape orientation on
roll paper.
• You can select only  Upper Button or Lower Button  if Cut Sheet  is selected.ButtonDetailsThe button is selected currently.The button can be selected.The button can not be selected.
2.Click the  Print Button.
 
Printing on the selected layout begins.
Windows Software 
>
 Preview 
>Printing with Selecting the LayoutiPF83004252