Canon Imageprograf Ipf8300 User Guide

							10.Click the  Layout tab to display the  Layout sheet.
11.Select the  CWatermark  check box.
12. Click FILE COPY  in the Watermarks  list.
Note•Click  DEdit Watermark  to open the Edit Watermark  dialog box. In the  Edit Watermark dialog
box, you can create custom watermarks and change the position and angle of watermarks.
13. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Enhanced Printing Options 
>
 Other useful settings 
>iPF8300Printing with Watermarks— COPY, FILE COPY, and so on (Windows)3183
 
						

							Making the Original Orientation Match the Paper OrientationYou can specify the original orientation to match the orientation of the paper for printing.
Orientation Paper is usually loaded in the printer in portrait orientation. When you have an original in landscape orientation, you can
specify the printing orientation so that the original is printed in landscape orientation.
Rotate 180 degrees
The original is rotated 180 degrees to print it upside down.
Mirror
A mirror image of the original is printed.
For instructions on specifying the original orientation before printing, refer to the following topics, as appropriate for your computer and operating system.
•Making the Original Orientation Match the Paper Orientation (Windows)
→P.184
• Making the Original Orientation Match the Paper Orientation (Mac OS X)
→P.186
Making the Original Orientation Match the Paper Orientation (Windows)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the fol- lowing example.
•Document: An original in landscape orientation
• Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1. Choose  Print in the application menu.
2. Select the printer in the dialog box, and then open the printer driver dialog box.(See " Accessing the Printer Driver
Dialog Box from Applications (Windows)
→P.205 ")
Enhanced Printing Options 
>
 Other useful settings 
>Making the Original Orientation Match the Paper OrientationiPF83003184
 
						

							3.Make sure the  Main sheet is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Make your selection in the  EPrint Target  list.
6. Make your selection in the  FPrint Quality  list.
Enhanced Printing Options 
>
 Other useful settings 
>iPF8300Making the Original Orientation Match the Paper Orientation (Windows)3185
 
						

							7.Click the  Page Setup  tab to display the  Page Setup sheet.
8.In  the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4 or
Letter (8.5"x11") .
9. In HOrientation , click JLandscape .
10. Select and click a roll paper in the  LPaper Source  list.
11. Select the width of the loaded roll in the  MRoll Paper Width  list—in this case, ISO A2/A3 Roll (420.0mm) .
12. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Making the Original Orientation Match the Paper Orientation (Mac OS X)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the fol-
lowing example.
•Document: An original in landscape orientation
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
 
Enhanced Printing Options 
>
 Other useful settings 
>Making the Original Orientation Match the Paper Orientation (Mac OS X)iPF83003186
 
						

							1.This sets the  BFormat for  and CPaper Size .Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu.
2.Select the printer in the  APrinter  list.
3. In the  FPaper Size  list, click the size of the original. In this case, click  ISO A4.
4. In DOrientation , click the icon of the document in landscape orientation.
5. If  you  configured  the  settings  using  the  Page  Attributes dialog  box,  click  FOK   to  close  the  dialog  box,  and  then
select  Print from the application software menu.
Enhanced Printing Options 
>
 Other useful settings 
>iPF8300Making the Original Orientation Match the Paper Orientation (Mac OS X)3187
 
						

							6.Access the  Main pane.
7.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
8. Make your selection in the  EPrint Target  list.
9. Make your selection in the  FPrint Quality  list.
10. Access the  Page Setup  pane.
11.Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options 
>
 Other useful settings 
>Making the Original Orientation Match the Paper Orientation (Mac OS X)iPF83003188
 
						

							12.Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  ISO A2/A3 (420.0mm) .Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
13. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  ISO A4.
14.Confirm the print settings, and then click  MPrint  to start printing.
Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Enhanced Printing Options 
>
 Other useful settings 
>iPF8300Making the Original Orientation Match the Paper Orientation (Mac OS X)3189
 
						

							Using FavoritesYou can register print settings as  Favorites to reuse settings from a particular job that met your expectations, or settings for
a particular page size that you will use repeatedly.
Favorites
Registering a favorite for later use. You can choose the settings you have registered from a list before printing, and you can
check the settings details.
Note• You can also save the favorite settings as files. Using these files is a convenient way to print under the same
conditions on another computer. (In Windows.)
For instructions on using favorites to print, refer to the following topics, as appropriate for your computer and operatingsystem.
•Using Favorites (Windows)
→P.203
• Using Favorites (Mac OS X)
→P.485
Cutting Roll Paper After Printing
Roll paper can be automatically cut after printing.
Note• It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that
cannot be used with the auto cut feature, see the Paper Reference Guide. (See " Types of Paper
→P.768")
Automatic Cutting
Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or you can print a cut line.
For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your computer and oper-
ating system.
•Cutting Roll Paper After Printing (Windows)
→P.190
• Cutting Roll Paper After Printing (Mac OS X)
→P.192
Cutting Roll Paper After Printing (Windows)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a
cut line for manual cutting.
Note• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the
steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
1. Choose  Print in the application menu.
2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
Enhanced Printing Options 
>
 Other useful settings 
>Using FavoritesiPF83003190
 
						

							3.Click the  Page Setup  tab to display the  Page Setup sheet.
4.Select and click a roll paper in the  LPaper Source  list.
5. Click  NRoll Paper Options  to display the Roll Paper Options  dialog box.
6.To enable automatic cutting, click  Yes in the  AAutomatic Cutting  list. If you prefer to cut the paper later yourself,
click  Print Cut Guideline .
7. Click  OK to close the  Roll Paper Options  dialog box.
8. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings (Windows)→P.200"
Roll paper will be automatically cut after printing.
Enhanced Printing Options 
>
 Other useful settings 
>iPF8300Cutting Roll Paper After Printing (Windows)3191
 
						

							Cutting Roll Paper After Printing (Mac OS X)This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a
cut line for manual cutting.Note• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the
steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
 
1. This sets the  BFormat for  and CPaper Size .
Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu.
2.Select the printer in the  APrinter  list.
3. Choose the original size in the  CPaper Size  list.
4. If  you  configured  the  settings  using  the  Page  Attributes dialog  box,  click  FOK   to  close  the  dialog  box,  and  then
select  Print from the application software menu.
Enhanced Printing Options 
>
 Other useful settings 
>Cutting Roll Paper After Printing (Mac OS X)iPF83003192