Canon Pixma Mp630 User Guide

							Specify the print orientation.
Important
This setting is available only when Page Layout is Normal-size Printing. For others, the image is
automatically rotated according to the aspect ratio of the paper.
Copies
Specify the number of copies to print.
Vivid Photo
Select this checkbox to print the image in vivid colors.
Preview before printing
Select this checkbox to display the print result before printing.
Print
Start printing.
Note
Only the images in the Thumbnail window with the checkbox selected are printed.
Close
Closes the dialog box without printing the photo.
Page top
Page 461 of 805 pages Print Photo Dialog Box
 
						

							Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens
 > Send via
E-mail Dialog Box
Send via E-mail Dialog Box
Click Send in the View & Use window, then click Attach to E-mail on the list to open the Send via E-mail
dialog box.
In the Send via E-mail dialog box, you can make advanced settings for attaching images to e-mail.
Important
MP Navigator EX is compatible with the following e-mail software programs:
- Windows Mail (Windows Vista)
- Outlook Express (Windows XP/Windows 2000)
- Microsoft Outlook
- EUDORA
- Netscape Mail
(If an e-mail software program does not operate properly, check that the programs MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.)
Mail Program
The e-mail software program set up via Preferences in the Navigation Mode screen is displayed.
Select the e-mail software program you want to use.
Adjust attachment file size
When Save as type is JPEG, selecting this checkbox allows you to resize the images. Select a size
from Size.
Save in
Displays the folder in which to save the images. To change the folder, click Browse... to specify another
one. If resized, the resized images are saved.
The following folders are specified by default.
Windows Vista: MP Navigator EX folder in Picture folder
Windows XP: MP Navigator EX folder in My Pictures folder
Windows 2000: MP Navigator EX folder in My Pictures folder
File name
Enter the file name of the image to be attached (up to 32 characters). When saving multiple files, 4
digits are appended to each file name.
Set...
You can specify a compression type for JPEG files.
Select High(Low Compression), Standard or Low(High Compression).
Page top
Page 462 of 805 pages Send via E-mail Dialog Box
 
						

							Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Correct/
Enhance Images Window
Correct/Enhance Images Window
Click  (Image Correction/Enhancement) in the View & Use window or click Fix photo images in the
Task Button area to open the Correct/Enhance Images window.
In the Correct/Enhance Images window, you can make advanced settings including image correction/
enhancement and brightness/contrast adjustment.
You can also display the source image and corrected image side by side for comparison.
Important
Image correction/enhancement cannot be applied to PDF files or black and white binary files.
Note
The Correct/Enhance Images window can also be opened by clicking  (Image Correction/
Enhancement) on the Toolbar or in the Zoom in dialog box.
It may take a while to correct large images.
(1) Task Area
(2) Toolbar
Task Area
Available tasks and settings vary between the Auto and Manual tabs.
Click Auto or Manual to open the corresponding tab.
Auto Tab
Use the functions in the Auto tab to apply corrections and enhancements to the entire image.
See Correcting/Enhancing Images Automatically for details.
Page 463 of 805 pages Correct/Enhance Images Window
 
						

							Auto Photo Fix
Applies automatic corrections suitable for photos.
Face Sharpener
Sharpens out-of-focus faces. You can adjust the effect level using the slider.
Digital Face Smoothing
Enhances skin beautifully by removing blemishes and wrinkles. You can adjust the effect level using
the slider.
Apply to all images
Applies the correction to all images.
OK
Applies the selected effect to the selected image or all images.
Reset Selected Image
Cancels all corrections and enhancements applied to the selected image.
Save Selected Image
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Exit
Close the Correct/Enhance Images window.
Manual Tab
Use Adjust to adjust brightness and contrast, or to sharpen the entire image.
Use Correct/Enhance to correct/enhance specific areas.
See Correcting/Enhancing Images Manually for details.
Adjustment
Page 464 of 805 pages Correct/Enhance Images Window
 
						

							Brightness
Adjusts the overall image brightness.
Move the slider to the left to darken and right to brighten the image.
Contrast
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast.
Move the slider to the left to decrease and right to increase the contrast of the image.
Sharpness
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo
is out of focus or text is blurred.
Move the slider to the right to sharpen the image.
Blur
Blurs the outline of the subjects to soften the image.
Move the slider to the right to soften the image.
Show-through Removal
Removes show-through of text from the reverse side or removes the base color. Adjust the show-
through level to prevent text on the reverse side of thin document or the base color of the document
from appearing on the image.
Move the slider to the right to increase the show-through removal effect.
Defaults
Resets all adjustments (brightness, contrast, sharpness, blur, and show-through removal).
Reset Selected Image
Cancels all corrections, enhancements and adjustments applied to the selected image.
Save Selected Image
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Exit
Close the Correct/Enhance Images window.
Correction/Enhancement
Page 465 of 805 pages Correct/Enhance Images Window
 
						

							Face Brightener
Corrects the entire image so that the selected facial area is brightened. You can adjust the effect
level using the slider.
Undo
Cancels the latest correction.
Face Sharpener
Corrects the entire image to sharpen the face. You can specify the area you want to apply the effect
to. You can adjust the effect level using the slider.
Digital Face Smoothing
Enhances skin beautifully by removing blemishes and wrinkles. You can specify the area you want
to apply the effect to. You can adjust the effect level using the slider.
Blemish Remover
Removes moles. You can specify the area you want to apply the effect to.
Reset Selected Image
Cancels all corrections, enhancements and adjustments applied to the selected image.
Save Selected Image
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Exit
Close the Correct/Enhance Images window.
OK
Applies the selected effect to the specified area.
Toolbar
Toolbar
 (Rotate Left)
Rotates the image 90 degrees counter-clockwise.
 (Rotate Right)
Rotates the image 90 degrees clockwise.
 (Invert)
Inverts the image horizontally.
 (Trimming)
Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. In
Page 466 of 805 pages Correct/Enhance Images Window
 
						

							the displayed window, drag the white frame to specify the trimming area. Move the mouse
pointer inside the white frame and drag to move the trimming area.
Note
Place the main subjects along the broken white lines or at the intersections to create a
balanced image.
 (Enlarge)
Enlarges the displayed image.
 (Reduce)
Reduces the displayed image.
 (Full-screen)
Enlarges/reduces the image to display it full-screen.
 (Compare)
Opens the source image for comparison.
The source image appears on the left and the corrected image appears on the right.
Page top
Page 467 of 805 pages Correct/Enhance Images Window
 
						

							Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > One-click
Mode Screen
One-click Mode Screen
Click  (Switch Mode) at the bottom left of the Navigation Mode screen to display the One-click
Mode screen.
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Save
Scan and save documents. Document type is automatically detected. File format is automatically set.
Files are saved to a computer.
When you click this icon, the Save dialog box opens and you can specify the scan/save settings.
Save Dialog Box (One-click Mode Screen)
PDF
Scan documents and save them as PDF files.
When you click this icon, the PDF dialog box opens and you can specify the scan/save and application
settings.
PDF Dialog Box
Mail
Scan documents or photos and attach them to e-mail.
When you click this icon, the Mail dialog box opens and you can specify the scan/save and e-mail
software program settings.
Mail Dialog Box
OCR
Scan text documents then extract text in the image and display it in Notepad (included with Windows).
When you click this icon, the OCR dialog box opens and you can specify the scan/save and application
settings.
OCR Dialog Box
Important
For further procedures, refer to the applications manual.
Custom
Scan documents and open them in a specified application. Document type is automatically detected.
When you click this icon, the Custom dialog box opens and you can specify the scan/save and
application settings.
Custom Dialog Box
Important
For further procedures, refer to the applications manual.
 (Switch Mode)
Switch to Navigation Mode. The Navigation Mode screen appears.
Custom Scan with One-click Tab
 Preferences
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to
MP Navigator EX functions.
Preferences Dialog Box
 (Guide)
Open this guide.
Page 468 of 805 pages One-click Mode Screen
 
						

							Important
The following restrictions apply when you scan with Document Type set to Auto Mode in the Save or
Custom dialog box.
Specify Document Type (other than Auto Mode) to extract the text in the image and convert to
editable text after scanning.
Related Topic
Easy Scanning with One-click
Page top
Page 469 of 805 pages One-click Mode Screen
 
						

							Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save
Dialog Box (One-click Mode Screen)
Save Dialog Box (One-click Mode Screen)
Click Save to PC on the Custom Scan with One-click tab or click Save in the One-click Mode screen to
open the Save dialog box.
Scan Settings
Document Type
Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected. In that case, Color Mode, Document Size and Resolution are automatically
set as well.
Important
The following types of documents cannot be scanned correctly with Auto Mode. In that case,
specify Document Type.
- Documents other than photos, Hagaki, business cards, magazines, newspapers, text
documents and CD/DVD
- A4 photos
- Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as
paperback pages with the spine cut off
- Documents printed on thin white paper
- Wide documents such as panoramic photos
Reflective CD/DVD labels may not be scanned properly.
Place documents correctly according to the type of document to be scanned. Otherwise,
documents may not be scanned correctly.
See Placing Documents for details on how to place documents.
To reduce moire, set Document Type to Magazine.
Color Mode
Select how to scan the document.
Document Size
Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Page 470 of 805 pages Save Dialog Box (One-click Mode Screen)