Canon Pixma Mp630 User Guide

							2.
Remove the 8 cm disc from the CD-R Tray.
Page top
Page 591 of 805 pages Attaching/Removing the CD-R Tray
 
						

							Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing on the Label Side of DVD/CDs
Printing on the Label Side of DVD/CDs
The CD-R Tray (supplied) allows the printing of images on printable DVD/CDs.
This section describes how to print scanned photos or images on printable DVD/CDs.
Note
We recommend that you test print on an unneeded printable DVD/CD first.
Printing on DVD/CDs
Choose either of the method below according to your purpose.
To print from DVD/CD label
You can print the label side of the DVD/CD on a printable DVD/CD by loading it on the
Platen Glass.
Printing from DVD/CD Label
To print a DVD/CD label from photo data on a memory card
You can print photo data on a memory card on a printable DVD/CD by loading the
memory card on the Card Slot.
Printing from Photo Data
To print a DVD/CD label from a printed photo
You can print a printed photo on a printable DVD/CD by loading it on the Platen Glass.
Printing from Printed Photo
To print a DVD/CD label from film
You can print an image on a film (35 mm negative/positive (strip/slide)) on a printable
DVD/CD by loading it on the Platen Glass.
Printing from Film (MP980 series)
To print a DVD/CD label by using the supplied application
CD-LabelPrint is bundled application software that allows you to edit and modify data
before printing. Install it on your computer to use it.
Printing with CD-LabelPrint from the Computer
Adjusting the Print Area
If the image was not printed on the intended area, follow the steps below to adjust the print
area.
1.Make sure that the machine is turned on.
2.Select  Settings on the HOME screen, then press the OK button.
3.Select  Device settings, then press the OK button.
4.Select Print settings, then press the OK button.
5.Select DVD/CD print area adjust, then press the OK button.
6.Use the  or  button to select Right/left or Top/bottom and use the  or 
Page 592 of 805 pages Printing on the Label Side of DVD/CDs
 
						

							button to adjust the print area.
You can adjust the printing area by 0.1 mm between -0.9 mm and +0.9 mm.
7.Press the OK button.
Page top
Page 593 of 805 pages Printing on the Label Side of DVD/CDs
 
						

							Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from DVD/CD Label
Printing from DVD/CD Label
Copy the label of an existing DVD/CD and print it on a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see 
Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select  DVD/CD label print on the HOME screen, then press the OK button.
3.Select  From DVD/CD label, then press the OK button.
The print area setting screen is displayed.
4.Use the  or  button to select Outer circle or Inner circle and use the  or 
button to change the print area.
5.Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.Use the  or  button to select Recommended DVD/CD or Other DVD/CD, then
press the 
OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
7.Load the copy source DVD/CD on the Platen Glass, then press the OK button.
Important
Be sure to load the copy source DVD/CD with its label side down on the center of the Platen
Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
8.Check the print settings, then press the OK button.
The message for preparation is displayed.
Note
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item
to change appears, then change the setting.
Important
Do not see the light source directly while copying is in progress.
Page 594 of 805 pages Printing from DVD/CD Label
 
						

							9.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
10.Press the Color button.
Note
If you press the Black
 button in step 8, black & white copying will start even if you press the 
Color button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink
has dried.
Page top
Page 595 of 805 pages Printing from DVD/CD Label
 
						

							Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from Photo Data
Printing from Photo Data
Print an image on a memory card onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see 
Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select  DVD/CD label print on the HOME screen, then press the OK button.
3.Select  From photo data, then press the OK button.
4.Confirm the message, then insert the memory card into the Card Slot.
The print area setting screen is displayed.
5.Use the  or  button to select Outer circle or Inner circle and use the  or 
button to change the print area.
6.Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
7.Use the  or  button to select Recommended DVD/CD or Other DVD/CD, then
press the 
OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
8.Use the  or  button to select the photo to print, then press the OK button.
9.Confirm the print image on the DVD/CD, then press the OK button.
Note
Other options
Printing a Specified Area (Trimming)
Searching for Photos with the Shooting Date (Search)
10.Check the print settings, then press the OK button.
The message for preparation is displayed.
Note
To change print settings, press the Back button repeatedly until the screen for the setting item
Page 596 of 805 pages Printing from Photo Data
 
						

							to change appears, then change the setting.
11.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12.Press the Color button.
Note
Printing will not start if you press the Black button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink
has dried.
Page top
Page 597 of 805 pages Printing from Photo Data
 
						

							Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from Printed Photo
Printing from Printed Photo
Print an image on a printed photo onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see 
Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select  DVD/CD label print on the HOME screen, then press the OK button.
3.Select  From printed photo, then press the OK button.
The print area setting screen is displayed.
4.Use the  or  button to select Outer circle or Inner circle and use the  or 
button to change the print area.
5.Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.Use the  or  button to select Recommended DVD/CD or Other DVD/CD, then
press the 
OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
7.Load the photos on the Platen Glass.
Press the OK button to scan the photos.
Important
Do not see the light source directly while scanning is in progress.
8.Use the  or  button to select the photo to print, then press the OK button.
Note
If  appears on the preview screen, the photos may be not scanned properly. Press the 
Back button, then repeat the procedure from step 7.
9.Confirm the print image on the DVD/CD, then press the OK button.
Note
Other options
Page 598 of 805 pages Printing from Printed Photo
 
						

							Printing a Specified Area (Trimming) in Using Useful Display Functions
10.Check the print settings, then press the OK button.
The message for preparation is displayed.
Note
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item
to change appears, then change the setting.
11.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12.Press the Color button.
Note
If you press the Black
 button in step 10, black & white copying will start even if you press the 
Color button.
To cancel copying, press the Stop button.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink
has dried.
Page top
Page 599 of 805 pages Printing from Printed Photo
 
						

							Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from Film (MP980 series)
Printing from Film (MP980 series)
Print an image on a film (35 mm negative/positive (strip/slide)) onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see 
Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select  DVD/CD label print on the HOME screen, then press the OK button.
3.Select  From film, then press the OK button.
The print area setting screen is displayed.
4.Use the  or  button to select Outer circle or Inner circle and use the  or 
button to change the print area.
5.Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.Use the  or  button to select Recommended DVD/CD or Other DVD/CD, then
press the 
OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
7.Select the type of film.
Note
You can select Color negative film, B&W negative film, Color positive film, or Mount (for slides).
8.Load the film on the Platen Glass.
Press the Color button to scan the film.
Important
Do not see the light source directly while scanning is in progress.
9.Use the  or  button to select the photo to print, then press the OK button.
Note
If  appears on the preview screen, the photos may be not scanned properly. Press the 
Page 600 of 805 pages Printing from Film (MP980 series)