Canon Pixma Mx492 User Guide

							1403Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
931
 
						

							1485Cause
Appropriate ink cartridge is not installed.
Action Printing cannot be executed because the ink cartridge is not compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
932
 
						

							1682Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
933
 
						

							1684Cause
The ink cartridge cannot be recognized.
Action Printing cannot be executed because the ink cartridge may not be installed properly or may not be
compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
934
 
						

							1686Cause
The ink may have run out.
Action The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly
detected.
If you want to continue printing without this function, press the machine's  Stop button for at least 5
seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of
printing under the ink out condition.
Note
•
If the function for detecting the remaining ink level is disabled,  is displayed on the LCD.
•
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink cartridge is replaced. You
must manually print out faxes that were stored in the memory. You can change the setting so that the
received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax
information may not be printed because of the ink out condition.
935
 
						

							1688Cause
The ink has run out.
Action
Replace the ink cartridge and close the paper output cover.
If printing is in progress and you want to continue printing, press the machine's  Stop button for at least 5
seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is not
satisfactory, if printing is continued under the ink out condition.
Note
•
If the function for detecting the remaining ink level is disabled,  is displayed on the LCD.
•
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink cartridge is replaced. You
must manually print out faxes that were stored in the memory. You can change the setting so that the
received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax
information may not be printed because of the ink out condition.
936
 
						

							168ACauseThe FINE cartridge is not installed properly, or the FINE cartridge not compatible with this machine isinstalled.
Action Open the paper output cover, then remove the FINE cartridges.
Make sure that the FINE cartridge compatible with the machine is installed. Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
When the FINE cartridge is installed properly, you hear an electric sound once.
After installing, close the paper output cover.
937
 
						

							1702Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
938
 
						

							1703Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
939
 
						

							1704Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
940