Home > Canon > Printer > Canon printer imageCLASS MF249dw User Manual

Canon printer imageCLASS MF249dw User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer imageCLASS MF249dw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 714
    							CheckingtheSSIDandNetworkKey
    1469-06A
    When manually setting up a wireless connection, you need to specify the SSID and network key of your wireless router. The SSID and network key may be indicated on these networking devices. Check your devices and write down thenecessary information before setting up the connection. For more information, see the instruction manuals for yournetworking devices or contact your manufacturer.
    SSIDA name given for identifying a  speci4c wireless LAN. Some other terms used for SSID include
    "access point name" and "network name."
    Network Key
    A keyword or password used for encrypting data or authenticating a network. Some other
    terms used for network key include "encryption key," "WEP key," "WPA/WPA2 passphrase,"
    and "preshared key (PSK)."
    Wireless Security
    Protocols
    (Authentication/
    Encryption)
    When manually setting up a wireless connection by specifying detailed settings, you need to
    specify security settings. Check the following information:
    	 Security types (WEP/WPA-PSK/WPA2-PSK)
    	 Authentication method (Open System/Shared Key)
    	 Encryption method (TKIP/AES-CCMP)
    	CChecking the SSID and Network Key from a Computer
    The SSID or the network key may have been changed. If you do not know the SSID or the network key, you can check
    them by using the Canon MF/LBP Wireless Setup Assistant included with the provided DVD-ROM. The Canon MF/LBP Wireless Setup Assistant can be used on a computer connected to a wireless LAN.
    IfyouareaMacOSuser
    The provided DVD-ROM that comes with the machine does not contain the Canon MF/LBP Wireless SetupAssistant for Mac OS. It is available from the following Canon Web site: http://www.canon.com/
    1InserttheprovidedDVD-ROMintothedriveonthecomputer.
    	 Select a language and click [OK] if you are prompted to do so.
    2Click[StartSoftware[email protected]
    333 
    						
    								If  the  above  screen  is  not  displayed Displaying the [Software Programs/Manuals Setup@
    Screen(P.670)
    	 If [AutoPlay] is displayed, click [Run MInst.exe].
    3Click[Start@for[CanonMF/LBPWirelessSetup[email protected]theLicenseAgreementandclick[Yes@toagree.Network
    334    
    						
    							5Checktheinformationdisplayedforthewirelessrouter.
    	Write down the necessary information. If you do not know what information is necessary, write down all the
    information that is displayed.
    Ifwirelessroutersarenotfound
    Click [Refresh]. If nothing happens, check that the settings are correctly  con4gured on the computer and the
    wireless router.
    LINKS
    ConnectingtoaWirelessLAN(MF249dw/MF247dw)(P.319)
    SettingUpConnectionbySelectingaWirelessRouter(P.326)
    SettingUpConnectionbySpecifyingDetailedSettings(P.329)
    Network
    335          
    						
    							SettingIPAddresses
    1469-06C
    Connecting the machine to a network requires a unique network IP address. Two versions of IP addresses are available: IPv4 and IPv6.  Con4gure these settings depending on the network environment. To use IPv6 addresses, you
    need to properly  con4gure the IPv4 address settings.
    Network
    336 
    						
    							SettingIPv4Address
    1469-06E
     The machine's IPv4 address can be either assigned automatically by a dynamic IPaddressing protocol, such as DHCP, or entered manually. When connecting the
    machine to a wired LAN, make sure that the connectors of the LAN cable are  4rmly
    inserted into the ports ( 
    ConnectingtoaWiredLAN(P.318) ). You can test the
    network connection if necessary.
    SettingIPv4Address(P.337)
    TestingtheNetworkConnection(P.339)
    Setting IPv4 Address
    1TapintheScreen.2Tap.
    	 If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting
    theSystemManagerPIN(P.397)
    3Select.4Con4gure IPaddresssettings.
     
    Select to automatically assign an IP address via a protocol such as DHCP. When  is
    displayed, automatic addressing is enabled.
      
    Select to  con4gure  the IP address settings by manually entering an IP address. In order to select this
    option,  must be set to .
      
    Select when you want to view the current IP address settings.
    AutomaticallyassigninganIPaddress
    1Select   .
    Network
    337             
    						
    							2Tap , , or .
    IfyoudonotwanttouseDHCP/BOOTP/RARPtoassignanIPaddressSelect . If you select , , or  when these services are unavailable, the
    machine will waste time and communications resources searching the network for these services.
    3Check that  is set to .
    	 If  is selected, change the setting to .4Tap .
    IP addresses assigned via DHCP/BOOTP/RARP override the address obtained via Auto IP.
    ManuallyenteringanIPaddress
    1Check that  is set to .
    	If  is displayed, tap , and set both  and  to .
    2Tap .3Specify the IP address, subnet mask, and gateway address (or default gateway).
    	 Specify the settings in the following order:  
       .
    	 Enter each setting using the numeric keys, and tap .Network
    338 
    						
    							Checkingwhetherthesettingsarecorrect
    Make sure that the Remote UI screen can be displayed with your computer ( 
    StartingRemoteUI(P.450) ). If
    a computer is not available, you can check the connection by using the operation panel ( 
    Testingthe
    NetworkConnection(P.339) ).
    Testing the Network Connection
    1TapintheScreen.2Tap.
    	If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting
    theSystemManagerPIN(P.397)
    3Select.4EntertheIPv4addressofanotherdeviceonthenetwork,andtap.
    	 If a proper connection has been established, the result is displayed as shown above.
    LINKS
    SettingIPv6Addresses(P.340)
    ViewingNetworkSettings(P.344)
    Network
    339                
    						
    							SettingIPv6Addresses
    1469-06F
     The IPv6 addresses of the machine can be con4gured via the Remote UI. Before
    setting IPv6 addresses, check the IPv4 address settings ( 
    ViewingIPv4
    Settings(P.344) ). You need to set the correct IPv4 settings to use IPv6 addresses.
    Note that the scan function that uses the scanner driver or MF Scan Utility is not
    available in an IPv6 environment. The machine can use up to nine of the following IPv6 addresses:
    TypeMaximum number
    availableDescriptionLink-local address1An address that is only valid within a subnet or link and cannot be used to communicate with devices beyond a router. A link-local address is automatically setwhen the IPv6 function of the machine is enabled.Manual address1An address that is entered manually. When using this address, specify the  pre4x
    length and default router address.Stateless address6An address that is generated automatically using the MAC address of the machine and the network  pre4x that is advertised by the router. Stateless addresses are
    discarded when the machine is restarted (or turned ON).Stateful address1An address obtained from a DHCP server using DHCPv6.
    1StarttheRemoteUIandlogoninSystemManagerMode.StartingRemote
    UI(P.450)2Click[Settings/[email protected][NetworkSettings@[TCP/IP[email protected]
    340       
    						
    							4Click[Edit@in[IPv6[email protected]the[UseIPv6@checkboxandcon4guretherequiredsettings.Network
    341 
    						
    							[UseIPv6@
    Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box.
    [UseStatelessAddress@Select the check box when using a stateless address. When not using a stateless address, clear the check box.
    [UseManualAddress@When you want to manually enter an IPv6 address, select the check box and enter the IP address,  pre4x
    length, and default router address in the corresponding text boxes.
    [IPAddress@
    Enter an IPv6 address. Addresses that start with "ff" (or multicast address) cannot be entered.
    >Pre4x Length@
    Enter a number that indicates how many bits are available for the network address.
    [DefaultRouterAddress@
    Specify the IPv6 address of the default router as necessary. Addresses that start with "ff" (or multicast
    address) cannot be entered.
    [UseDHCPv6@
    Select the check box when using a stateful address. When not using DHCPv6, clear the check box.
    6Click[[email protected]
    342 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer imageCLASS MF249dw User Manual