Home > Canon > Printer > Canon printer imageCLASS MF249dw User Manual

Canon printer imageCLASS MF249dw User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer imageCLASS MF249dw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 714
    							NetworkSettings
    1469-08W
     All the settings about the network are listed with short descriptions. Default
    settings are marked with a dagger (
    ).
    IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . 
    SettingtheSystemManagerPIN(P.397)
    Asterisks( *
    )
    Settings marked with an asterisk ( *
    ) are only available for the MF249dw / MF247dw.
    SelectWired/WirelessLAN(P.473)
    WirelessLANSettings(P.473)
    DirectConnectionSettings(P.475)
    TCP/IPSettings(P.476)
    SNMPSettings(P.480)
    DedicatedPortSettings(P.482)
    WaitingTimeforConnectionatStartup(P.482)
    EthernetDriverSettings(P.482)
    IEEE802.1XSettings(P.482)
    InitializeNetworkSettings(P.483)
    Select Wired/Wireless LAN  *
    When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following ). 
    SelectingWiredLANorWirelessLAN(MF249dw/MF247dw)(P.317)
    Wired LAN
    Wireless LAN
    Wireless LAN Settings  *
    Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the
    setting for saving power consumption. See "Getting Started" 
    ManualsIncludedwiththeMachine(P.660) .
    SSIDSettings
    Select to  con4gure  a wireless connection by specifying information including an SSID or a network key by
    inputting manually from the operation panel.
    SelectAccessPoint Wireless LAN routers that can access the machine are automatically located, so you can select from the list.You must manually enter a network key, such as a WEP key or a PSK. 
    SettingUpConnectionbySelecting
    aWirelessRouter(P.326)
    Setting Menu List
    473                                           
    						
    							EnterManuallySelect to  con4gure  a wireless connection by manually entering an SSID. By using this method, you can specify
    authentication and encryption settings in detail. 
    SettingUpConnectionbySpecifyingDetailed
    Settings(P.329)
    SecuritySettings
    None
    WEP
    Open System
    Select WEP Key: 1/2/3/4Edit WEP Key
    Shared Key Select WEP Key: 1/2/3/4
    Edit WEP Key
    WPA/WPA2-PSK Auto
    AES-CCMP
    WPSPushButtonMode
    Select to automatically  con4gure a wireless connection by using the button on a WPS wireless router. Setting
    UpConnectionUsingWPSPushButtonMode(P.321)
    WPSPINCodeMode
    Select to  con4gure  a wireless connection by entering a PIN code for a WPS wireless router. SettingUp
    ConnectionUsingWPSPINCodeMode(P.323)
    PowerSaveMode
    Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
    Off
    On
          Read the displayed message
       Select  or   
    WirelessLANInformation
    Select to view the current wireless LAN settings. ViewingNetworkSettings(P.344)
    MAC Address
    Wireless LAN Status
    Latest Error Information
    Channel
    SSID Settings
    Security Settings
    Power Save Mode
    Setting Menu List
    474             
    						
    							Direct Connection Settings *
    Con4gure  settings for Direct Connection. After  con4guring settings, you can connect to the machine directly and
    wirelessly from a mobile device even without an access point or wireless LAN router.
    UseDirectConnection
    Select whether to use Direct Connection. You can select  or  when  is set to  while the Wirelss LAN connection is enabled. 
    MakeDirectConnection(AccessPointMode)(MF249dw/MF247dw)(P.291)
    Off  
     
    On Direct Connection Only
    Wireless LAN/Direct Conn. (Auto Switch)
            
     Select  or  when  is selected in   
       
    TimeUntilDirectConnectionTermination
    Set the time that the machine exits Direct Connection mode automatically. Can be set when  is . Once the time set in  is reached,
    communication between the machine and a mobile device is discontinued. Before starting a large print job, you
    should set a long delay time or set the delay time to  (Off).
    0 (Off)
    1 to 10
     to 60 (min.)
           
     Set time to disconnect    
    AccessPointModeSettings
    To make detailed settings, such as authentication and encryption, enter an SSID and network key to  con4gure
    settings. Can be set when  is .
    UseCustomSSID
    Off
    On
    SSID (1-20 Characters)
     
    UseCustomNetworkKey Off
    On
    Network Key (10 Char.)
    Setting Menu List
    475    
    						
    							       
    Select  or     Set SSID Settings or Network
    Key Settings 
       
    TCP/IP Settings
    Specify settings for using the machine in a TCP/IP network, such as IP address settings.
    IPv4Settings
    Specify settings for using the machine in an IPv4 network.
    IPAddressSettings Con4gure  the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
    network. 
    SettingIPv4Address(P.337)
    AutoAcquire
    Select Protocol
    Off
    DHCP
    BOOTP
    RARP
    Auto IP Off
    On
     
    ManuallyAcquire IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Gateway Address: 0.0.0.0
     
    CheckSettings Auto Acquire
    IP Address
    Subnet Mask
    Gateway Address
    PINGCommand
    Select to check that the machine is connected to a computer over a network. 
    TestingtheNetwork
    Connection(P.339)
    DNSSettings Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. 
    Con4gurLng DNS(P.377)
    DNSServerSettings
    Primary DNS Server: 0.0.0.0
    Secondary DNS Server: 0.0.0.0
     
    DNSHostName/DomainNameSettings Host Name
    Setting Menu List
    476          
    						
    							Domain Name
     
    DNSDynamicUpdateSettings Off
    On
    DNS Dyn. Updt. Intrvl. 0 to 24
     to 48 (hr.)
    mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
    Con4gurLng DNS(P.377)
    Off
     
    On
    mDNS Name
    DHCPOptionSettings Select whether to acquire the host name and whether to use the dynamic update function via the DHCP
    options when DHCP is enabled. 
    Con4gurLng DNS(P.377)
    AcquireHostName
    Off
    On
     
    DNSDynamicUpdate Off
    On
     
    AcquireSMTPServerAddress  *
    Off
    On
     
    AcquirePOPServerAddress  *
    Off
    On
    IPv6Settings
    Specify settings for using the machine in an IPv6 network.
    UseIPv6 Enable or disable IPv6 in the machine. You can also view the current settings. 
    SettingIPv6
    Addresses(P.340)
    Off  
     
    On
    
    CheckSettings Link-Local Address
    Pre4x  LengthSetting Menu List
    477          
    						
    							StatelessAddressSettingsEnable or disable stateless addresses.  
    SettingIPv6Addresses(P.340)
    Off
    
    On  
     
    CheckSettings Stateless Address
    Pre4x  Length
    UseDHCPv6
    Enable or disable the stateful address that is acquired via DHCPv6. 
    SettingIPv6Addresses(P.340)
    Off  
    
    On
    
    CheckSettings Stateful Address
    Pre4x  Length
    DNSSettings
    Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. 
    Con4gurLng DNS(P.377)
    DNSHostName/DomainNameSettings
    Use IPv4 Host/Domain
    Off Host Name
    Domain Name
    On
     
    DNSDynamicUpdateSettings Off
    On
    Register Manual Address Off
    On
    Register Stateful Address Off
    On
    Register Stateless Address
    Off
    On
    DNS Dynamic Update Interval 0 to 24
     to 48 (hr.)
    Setting Menu List
    478          
    						
    							mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
    Con4gurLng DNS(P.377)
    Off
     
    On
    Use IPv4 Name for mDNS
    Off mDNS Name
    On
    LPDPrintSettings
    Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. 
    Con4gurLng PrintingProtocolsandWSDFunctions(P.348)
    Off
    On
    RAWPrintSettings
    Enable or disable RAW, a Windows  speci4c printing protocol. Con4gurLng PrintingProtocolsandWSD
    Functions(P.348)
    Off
    On
    WSDSettings
    Enable or disable automatic browsing and acquiring information for the printer or scanner by using the WSD
    protocol that is available on Windows Vista/7/8/10/Server 2008/Server 2012. 
    Con4gurLng PrintingProtocols
    andWSDFunctions(P.348)
    WSDPrintSettings
    Use WSD Print
    Off
    On
    Use WSD Browsing Off
    On
     
    WSDScanSettings Use WSD Scan
    Off
    On
    Use Computer Scan Off
    On
     
    UseMulticastDiscovery Off
    On
    Setting Menu List
    479             
    						
    							UseHTTP
    Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote
    UI, WSD printing, or printing with Google Cloud Print. 
    DisablingHTTPCommunication(P.423)
    Off
    On
    PortNumberSettings
    Change port numbers for protocols according to the network environment. ChangingPortNumbers(P.409)
    LPD 1 to 515
     to 65535
     
    RAW 1 to 9100
     to 65535
     
    WSDMulticastDiscovery 1 to 3702
     to 65535
     
    HTTP 1 to 80
     to 65535
     
    POP3  *
    1 to 110
     to 65535
     
    SMTP  *
    1 to 25
     to 65535
     
    SNMP 1 to 161
     to 65535
    MTUSize
    Select the maximum size of packets the machine sends or receives. ChangingtheMaximumTransmission
    Unit(P.375)
    1300
    1400
    1500
    SNMP Settings
    Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software.
    MonitoringandControllingtheMachinewithSNMP(P.386)
    SNMPv1Settings
    Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to
    Management Information Base (MIB) objects.
    Off
    
    Setting Menu List
    480             
    						
    							On
    Community Name 1 SettingsOff
    On
    Community Name
    MIB Access Permission
    Community Name 2 Settings Off
    On Community Name
    MIB Access Permission
    Dedicated Community Settings Off
    On
            
     Select  or   Specify settings if  is selected  
    SNMPv3Settings
    Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is
    enabled.
    Off
    On
            Select  or 
     
    AcquirePrinterMngt.Info.fromHost
    Enable or disable the monitoring of printer management information from a networked computer running
    SNMP-compatible software.
    Off
    On
          
     Select  or   
    Setting Menu List
    481 
    						
    							Dedicated Port Settings
    Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.
    Off
    On
          Select  or   
    Waiting Time for Connection at Startup
    Specify a wait time for connecting to a network. Select the setting depending on the network environment. 
    Settinga
    WaitTimeforConnectingtoaNetwork(P.376)
    0 to 300 (sec.)
    Ethernet Driver Settings
    Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). You can also view the MAC address of the machine.
    AutoDetect
    Select whether to automatically detect or manually select the communication mode and the Ethernet type. 
    Con4gurLng EthernetSettings(P.373)
    Off
    Communication Mode
    Half Duplex
    Full Duplex
    Ethernet Type 10BASE-T
    100BASE-TX
     
    On
    MACAddress
    Check the MAC address of the machine, which is a number unique to each communication device. Viewing
    theMACAddressforWiredLAN(P.345)
    IEEE 802.1X Settings
    Enable or disable IEEE 802.1X authentication. 
    Con4gurLng IEEE802.1XAuthentication(P.429)
    Off
    OnSetting Menu List
    482             
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer imageCLASS MF249dw User Manual