GTE Omni Si Database Technical Practices Manual

							TL-130400-1001Table 15.8BEntry Fields for Record Code TL (Continued)COMMENTS
AC = transaction record is printed when
message meteringis activated.
meteringis activatedor deactivated.
-If more thanoneprinter is used, enter the
values (e.g., if printers 0 and
3; if printers 2 and 3 are
conditions required
out to be activated when this feature
AC = transaction record is printed wh
message metering is activated.
DE = transaction record is printed when
message metering is deactivated.
BT= transaction record is printed when
-If only one printer is used, enter the printer
value 01, 02, 04, or 08.
SW 52108187D-295 
						

							TL-130400-1001Record Code AL:15.9 Record Code AL, Figure 15.9, assigns a printer to a KEDU
Audit Recordfor the audit functions associated with that KEDU. The printer is
Controlassigned the following values:
l Printer No. 0 is assigned the value 01.
* Printer No. 1 is assigned the value 02.
o Printer No. 2 is assigned the value 04.
l Printer No. 3 is assigned the value 08.
. . . .
D-296The printer ID identifies a specific printer number or several
printer numbers, depending on the value range entered. If more
than one printer is to be designated, use Table 
15.9A. Example:
printer numbers 0 and 3 have the value of 9. Printer 
IDS and
‘numbers are found in Table 
15.9A.Table 
15.9A Printer ID
NumberPrinter
Number(s)
I  
11206I
110, 1, 3
12 
2,3
130, 2, 3
141, 2, 3
150, 1, 2, 3
8187SVR 5210 
						

							TL-130400-1001I IITI
I NIII DI:II EII
I XI:I.-----r---r-r-------r-------r--------------------------------------A-----------
xJ(
MI
I
I
I
I
I
-..
I
I
I
t
II
I
I
t
I
I
I
I
I
ItI-+-T-f-T-T-;-T-+-I1 I1 I1 I1 I1 I1 I1 I.71819101112131415161;
-+-+-u-+-+-+-+-+-+.4,OlOlAl LlOl I I I I--A--L-A-L-L-L-*-
I-T-f--r-t-T-+-T-t-r-+-T-I I1 11121212121212121212
718191011 12131415161718
-+-c-+-+-+-+-+-+-+-+-+-I I I, I, I I I I I-~-~-~-~-*-~-*-~-*-*-*-
-T-f-T-t-T-f-T-&T-T-T-T-T-I!131313131313131313131414141i8110111213141516171819101112, IO
-+-c-+-+-+-+-+-+-+-c-+-+-+-4 c-
l I I I I I I I I I I I I I I-A-*-A-A.-A-*-A-A--L-A . . . 4-LTable 15.98 Entry Fields for Record Code AL
F-pi-VALID
ENTRIESCOMMENTS
12KEDU Number
13-14Message Meter
Function StatusFigure 15.9 Record Code AL: Audit Record Control Data Sheet
O-3 = numberThis field determines the selected KEDU
number and is used by the system for
identification purposes.
-This number must be defined on Record
Code KD.
AL = messagemetering
information is to be
printed-- = metering
information is not
to be printedEnter AL if the printer(s) can accept message
metering information associated with a KEDU.
-Columns 15-l 6 indicate which printer(s)
will print this information.
-l’,lke; entered, columns 15-16 cannot be
SVR 5210
8187D-297 
						

							 rTL--l30400-1001Table 15.95
Entry Fields for Record Code AL (Continued)COMMENTS
rrnter Numberaccept message metering. information
associated with a KEDU.
-When only one printer is selected to print,
enter the sum of theprinter values
01,02,04,
-Whenmore than one printer is selected to
print, enter the value from Table 
15.9A(e.g.,in this field must be
Enter AL if the printer(s) can accept message
meteringinformation associated with a KEDU.
Printer Number
associated with
aKEDU.
-When only one printer is selected to print,
enter thesum
of theprinter values01,02,04,-When more than one printer is selected to
print, enter the value from Table 
15.9A (e.g.,
for printer numbers 0 and 1, enter 3; for
numbers 2 and 3, enter 12.
-A printer number used in this field must be
defined onRecord Code PD.
will print this information.
-ll;;ez entered, columns 23-24 cannot be
8187SW 5210 
						

							TL-130400-1001Table 15.96Entry Fields for Record Code AL (Continued)Indicate whether or not the printer(s) can
accept message metering information
associated with a KEDU.
-When only one printer is selected to print,
enter printer value 
01, 02, 04, or 08.
-When more than one printer is selected to
print, enter the sum of the printer value (e.g.,
for printer numbers 0 and 1, enter 3; for
numbers 2 and 3, enter 12).
-A printernumber used in this field, must be
will print this information.
-lgl;ez entered, columns 27-28 cannot be
-When more than one printer is selected to
print, enter the sum of the printer values
(e.g.,his field must be
Enter AL if the printer(s) can accept message
metering information associated with a KEDU.
SVR 5210
8187D-299 
						

							TL-130400-1001
Table 15.98Entry Fields for Record Code AL (Continued)
COL.NO.
D-300
31-32
33-34
35-36
COL.NAME
Message
Waiting Printer
Number,
Identification
Wake Up
Function StatusVALID
ENTRIES
01-l 5 = number
-- = N/A
AL = messagemetering
information is to be
printed
-- = metering
information is not
to be printed
01-l 5 = number
-- = N/A Wake Up Printer
Number
Identification
8187COMMENTS
Indicate whehter or not the printer(s) can
accept message metering information
associated with a KEDU.
-When only one printer is selected to print,
enter printer value 01, 02, 04, or 08.
-When more than one printer is selected to
print, enter the sum of the printer values (e.g.,
for printer numbers 0 and 1, enter 3; for
numbers 2 and 3, enter 12).
-A printer number used in this field must be
defined on Record Code PD.
Enter AL if the printer(s) can accept message
metering information associated with a KEDU.
-Columns 35-36 indicate which printer(s)
will print this information.
-If AL is entered, columns 35-36 cannot be
dashed.
Indicate whether or not the printer(s) can
accept message metering associated with a
KEDU.
-When only one printer is selected to print,
enter printer value 01, 02, 04, or 08.
-When more than one printer is selected to
print, enter the sum of the printer values (e.g.,
for printer numbers 0 and 
1, enter 3; for
numbers 2 and 3, enter 12).
-A printer number used in this field must be
defined on Record Code PD.
SVR 5210 
						

							TL-130400-1001Record Code WT:
Ward Control15.10 Record Code WT, Figure 15.10, defines the ward
groupings for the system. The beginning and ending times that
the system will automatically impose the do not disturb feature
are also defined. This feature provides quiet time for hospital
patient rooms. A maximum of eight time periods can be used for
up to 32 ward numbers. Time periods entered on this record
code must not overlap one another 
(e.g.12:00-4:00, 5:01-
11 
:OO).
. . .T---------
r-
r---
---------___T---------------ITI------------------------~
I
z!I
I;I
II
I:I1I
II
I
I
:II
I
I
WARD NUMBER(S)II
I
I
I
I
I
I
I
II
I
I
I
II
I
~-+-~-u-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-~-+-+-+-+-+-+-+-+-+-+-+--l~413lOlWI TIOI I I I I I I I I I I I I I I I I I I I I I I I I I I I I
A-J.-A-
-L-L-~-~-I-~-I-*-~-I-*-~-1-1-~-~-~-1-*-~-1-1-~-~-~-*-J.-A.-A-*-AWARD
NUMBER(S)I
I
I
IIIIIII
;
IIII-r--r--r-T-T-T-T-T-r-r-T-iI
Figure 15.10
Record Code WT: Ward Control Data Sheet
SW 52108187
D-301 
						

							TL-130400-1001Table 15.10Entry Fields for Record Code WT
COL.COL.VALID
NO.NAMEENTRIESCOMMENTS
12Time PeriodO-7 = numberThis field determines which time period this
Numberfield is. Up to eight time periods are allowed.
s--Each time period number must be unique..”13-14 
‘Y’ Begin Time by
00-23 = numberIndicate the hour that this feature, which
Hourprevents rooms from being rung, goes into
effect.
15-16Begin Time by00-59 = numberIndicate the minute of the hour that this feature
Minutegoes into effect.
17-18End Time by
00-23 = numberIndicate the hour that the feature is no longer
Hourin effect.
19-20End Time by
00-59 = numberIndicate the minute of the hour that this feature
Minuteis no longer in effect.
21-52Ward NumberA = allowedEnter A if the time periods created in columns
D = disallowed12-20 are in effect for this ward number.
-Ward numbers are assigned to stations on
Record Code LM, columns 32-33.
-Ward control is assigned to attendants on
Record Code AT, columns 39-40.
-If allowed, the attendant can change these
timing parameters from the console.
NOTE: If a ward number is listed on Record
Code LM, it must also be listed on this record
code.
D-3028187SVR 5210 
						

							TL-130400-1001
CENTRALIZED16.0 This section describes the record codes required to
ANSWERINGdefine the various system CAS (Centralized Answering Service)
SERVICEfeatures. The following record codes are required:
BRANCH/MAIN
l Record Code CF defines the system CAS Branch features.
l Record Code AD defines the CAS Main agent position.
l Record Code AF defines ACD recorder announcer access.Y..”. .SVR 5210l Record Code AG defines agent group characteristics.
l Record Code DK defines repertory dial numbers.
l Record Code RC defines RLT (Release Link Trunks)
characteristics.
l Record Code SM defines LCD (Liquid Crystal Display)
messages.
l Record Code SP defines supervisor messages.
l Record Code TM defines supervisor repertory dial key.
l Record Code RA defines CAS 
Main/ACD recorder
announcers.
l Record Code SD defines secondary directory numbers.
$187D-303 
						

							TL-130400-1001Record Code CF:16.1 Record Code CF, Figure 16.1, defines the CAS Branch
CAS Branch Featuresfeatures used by the system.
-------------------------------------------------,I
I
I
I
1114151ClFl I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I IL-*-*-~--~_I-~-~-~-~-i-~-~-~-*-~-~-~-~-~-~-~-~-~-~-~-*-~-~-~-*-~-~-~-~~-,
Figure 16.1Record Code CF: CAS Branch Features Data Sheet
D-3048187SVR 5210