GTE Omni Si Database Technical Practices Manual

							TL-130400-1001Table 21.1
CPG Error Messages (Continued)
DESCRlPTlON OF MESSAGESINSTRUMENT
- INSTRUMENT TYPE =‘PACT’:
TYPE -OTHER1) THE LINE TYPE MUST BE 
‘Ll’ OR ‘--‘.4) THE MDR WORK GROUP FIELD MUST NOT BE
5) THE CONTROLLING DCP FIELD MUST BE DASHED.
- INSTRUMENT TYPE = ‘AIFP’:
- INSTRUMENT TYPE = ‘DIFP’:
1) THE LINE TYPE MUST BE ‘CO’, ‘DA’, ‘NP’, ‘VP’ OR
2) THE CARD LOCATION AND CIRCUIT MUST NOT BE
3) THE CLASS OF SERVICE FIELDS MUST NOT BE
5) THE CONTROLLINGDCPFIELDMUST BEDASHED.
6) THE 
SIGLALLING MODE MUST BE ‘FP’ (LM - LD
SVR 52108187D-475 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)CPG ERROR
TITLE
INSTRUMENT
TYPE - OTHER
FIELDS (ON
RECORD CODES
LDAND LM)
(cont’d)DESCRIPTION OF MESSAGES
- INSTRUMENT TYPE = ‘DFPA’:
1) THE LINE TYPE MUST BE ‘CO’, ‘NP’, ‘VP’ OR ‘PC’.
2) THE CARD LOCATION AND CIRCUIT MUST NOT BE
DASHED.
3) THE CLASS OF SERVICE FIELDS MUST NOT BE
DASHED.
4) THE MDR WORK GROUP FIELD MUST NOT BE
DASHED.
5) THE CONTROLLING DCP FIELD MUST BE DASHED.
6) THE 
SIGLALLING MODE MUST BE ‘FP’ (LM - LD
CHECK).
- INSTRUMENT TYPE = ‘APM’:
1) THE LINE TYPE MUST BE ‘DA’.
2) THE DIRECTORY NUMBER MUST BE DASHED.
3) THE CARD LOCATION AND CIRCUIT MUST NOT BE
DASHED.
4) THE CLASS OF SERVICE FIELDS MUST BE DASHED.
5) THE MDR WORK GROUP FIELD MUST BE DASHED.
6) THE DIVERT DESTINATION IDENTIFIER MUST BE
DASHED.
7) THE FRL MUST BE DASHED.
8) THE GROUP AND INDIVIDUAL SPEED CALLING
FIELDS MUST BE DAZSHED.
9) THE REMOTE ACCESS AND AUTHORIZATION CODE
FIELD MUST BE DASHED.
10) THE CONTROLLING DCP FIELD MUST NOT BE
DASHED.
- INSTRUMENT TYPE = ‘SPM’:
1) THE LINE TYPE MUST BE ‘DA’.
2) THE DIRECTORY NUMBER MUST BE DASHED.
3) THE CARD LOCATION AND CIRCUIT MUST NOT BE
DASHED.
4) THE CLASS OF SERVICE FIELDS MUST BE DASHED.
5) THE MDR WORK GROUP FIELD MUST BE DASHED.
6) THE DIVERT DESTINATION IDENTIFIER MUST BE
DASHED.
7) THE FRL MUST BE DASHED.
8) THE GROUP AND INDIVIDUAL SPEED CALLING
FIELDS MUST BE DAZSHED.
9) THE REMOTE ACCESS AND AUTHORIZATION CODE
FIELD MUST BE DASHED.
10) THE CONTROLLING DCP FIELD MUST NOT BE
DASHED.
D-4768187SVR 5210 
						

							TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
LD-16INSTRUMENTINSTRUMENT TYPE = ‘----I:(cont’d)TYPE 
- OTHER
1) THE LINE TYPE MUST BE ‘NW’.
FIELDS (ON
2) THE CARD LOCATION AND CIRCUIT MUST NOT BE
_ RECORD CODES DASHED.
. . . .LD AND LM)
3) THE CLASS OF SERVICE FIELDS MUST BE DASHED.
(cont’d)
4) THE MDR WORK GROUP FIELD MUST BE DASHED.
5) THE DIVERT DESTINATION IDENTIFIER MUST BE
EITHER ‘0003’ OR ‘0011’.
. .6) THE FRL MUST BE DASHED.
7) THE GROUP AND INDIVIDUAL SPEED CALLING
FIELDS MUST BE DAZSHED.
8) THE REMOTE ACCESS AND AUTHORIZATION CODE
FIELD MUST BE DASHED.
- LINE TYPE = ‘CO’:
1) THE INTERCOM GROUP MUST BE DASHED.
LINE TYPE 
-2) THE DIVERT DESTINATION
OTHER FIELDS
- LINE TYPE = ‘DA’:
(ON RECORD1) THE INTERCOM GROUP MUST BE DASHED.
CODES LD AND
2) THE PICKUP GROUP AND EXTENDED FIELDS MUST
LWBE DASHED.
3) THE DIVERT DESTINATION IDENTIFIER MUST BE
DASHED.
4) THE GROUP AND INDIVIDUAL SPEED CALLING
FIELDS MUST BE A DASH.
- LINE TYPE = ‘Ll’:1) THE INTERCOM GROUP MUST BE DASHED.
2) THE PICKUP GROUP AND EXTENDED FIELDS MUST
BE DASHED.
3) THE DIVERT DESTINATION IDENTIFIER MUST BE
DASHED.
- LINE TYPE = ‘NW’:
1) THE INTERCOM GROUP MUST BE DASHED.
2) THE PICKUP GROUP AND EXTENDED FIELDS MUST
BE DASHED.
3) THE DIVERT DESTINATION IDENTIFIER MUST NOT
BE DASHED.
- LINE TYPE = ‘VP’:
1) THE INTERCOM GROUP MUST BE DASHED.
2) THE PICKUP GROUP AND EXTENDED FIELDS MUST
BE DASHED.
3) THE DIVERT DESTINATION IDENTIFIER MUST BE
DASHED.
4) THE MULTILINE FEATUREPHONE FIELD MUST BE
DASHED.
- LINE TYPE = I--‘:1) THE INTERCOM GROUP MUST BE DASHED.
SVR 5210
8187D-477 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESPICKUP GROUP
INCOMPATIBLE
INSTRUMENT TYPE MUST BE EITHER ‘APM’ OR ‘SPM’.
ANAGENT POSITION,
SMUST BE CODED FOR DIAL CALL PICKUP
WHILE THEDIVERT DESTINATIONIDENTIFIERIS STILL
D-4788187SVR 5210 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
ZPG ERROR
MESSAGESTITLEDESCRIPTION OF MESSAGES
LD-23ELEMENT 2 IS ADATA LINK LOCATION 
- AGENT POSITION NUMBER.
MEANINGLESSIF THE AGENT POSITION IS SPECIFIED, THEN THE
SPECIFICA-DATA LINK PEC MUST BE IN THE RANGE 0 TO 3.
‘: TION
-LD-26INDIVIDUALDIVERT DESTINATION - INDIVIDUAL SPEED CALLING
SPEED CALLING LIST.
LIST MUST BE
SPECIFIED
IF THE DIVERT DESTINATION IS ‘SC’, THEN THE
INDIVIDUAL SPEED CALLING LIST MUST NOT CONTAIN
DASHES.
THE DIVERT DESTINATION IS CODED ON THE LM
RECORD, WHILE THE INDIVIDUAL SPEED CALLING
LIST IS STILL CODED ON THE LD RECORD.
LD-51CARD TYPE
DEFINED ON FR
INCOMPATIBLE
WITH FCN OF
INCOMING
CARD
LD-51CARD TYPE
DEFINED ON FR
INCOMPATIBLE
WITH INCOMING
CARD TYPE
SVR 5210
8h37D-479 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)CPG ERROR
DESCRIPTION OF MESSAGES
FUNCTION OFLINE LOCATION
THE PEC, GROUP, SLOT, AND CIRCUIT FUNCTION
SPECIFIED IS INVALID FOR THE CARD TYPE DEFINED
ON FR (FOR THIS PEC TYPE).
A LINE WITH INSTRUMENT TYPE ‘DIFP’ MUST APPEAR
A LINE WITH INSTRUMENT TYPE ‘DATD’ MUST
APPEAR ON A DVC LINE CARD.
A LINE WITH INSTRUMENT TYPE 
‘DIFP’ AND LINE
TYPE OF ‘DA’ MUST APPEAR ON A DVC LINE CARD.
A LINE WITH INSTRUMENT TYPE ‘AIFP’ MUST APPEAR
ON A FP OR FPOP LINE CARD.
A LINE WITH INSTRUMENT TYPE ‘PACT’ OR ‘POTS’
MUST APPEAR ON A POTS OR OFFP LINE CARD.
A LINE WITH INSTRUMENT TYPE ‘APM’ OR ‘SPM’
MUST APPEAR ON A VPLO, 
VPLl, VP20 (VOICE AND
DATA OR DATA), OR VP21 LINE CARD.
A LINE WITH INSTRUMENT TYPE ‘DFPA’ MUST
APPEAR ON A VP20 (VOICE AND DATA) LINE CARD.
LOCATION IS A WIDE CARD AND IT OVERHANGS INTO
THIS PHYSICAL LOCATION ON FR.
LINE LOCATION
THE
PEC,GROUP,SLOT AND CIRCUIT FUNCTION
A LINE WITH INSTRUMENT TYPE ‘DATD’ MUST
APPEAR ON A DVC LINE CARD.
A LINE WITH INSTRUMENT TYPE ‘POTS’ MUST
APPEAR ON A POTS OR OFFP LINE CARD.
LD-51INEFFICIENTLINE LOCATION
USE OF 
VPLlINSTRUMENT TYPE ‘APM’ IS PERMITTED ON A VPLlCARD FOR
LINE CARD,
INSTRUMENTHOWEVER IT IS A SLOW SPEED DEVICE WHICH
TYPE SPECIFIEDNORMALLY IS ASSIGNED TO A VPLO LINE CARD.
(PHYLOC)
D-4808187SVR 5210 
						

							TL-130400-I 001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
DVCIP CARD
IF THE INSTRUMENT TYPE IS DATD, ON THE DVCIP
CARD, THEN THE CIRCUIT NUMBER MUST BE EITHER
P, SLOT, AND CIRCUIT SPECIFIED
E VALIDFOR THISPEC TYPE.
UP, AND SLOT SPECIFIED MUST BE
N FR RECORD.
E PECGROUPSLOT AND CIRCUIT SPECIFIED FOR
HIGHMUST SPECIFY THESAME
‘IT
FILLS,THE RIGHT HAND ONE
OVERSIZED CARD.
OVERHANGSTHE RIGHT HALF OF THAT CARD FILLS THIS SLOT.
INTO THIS SLOT
LD-51
LD-51
LD-52LINE TYPE DAIF THE INSTRUMENT TYPE IS ‘DIFP’ AND THE LINE
MUST BE ONTYPE IS ‘DA’, THEN THE CARD TYPE FOR THAT
DVC CARD FORLOCATION MUST BE DVC.
DIFP(PHYLOC)
CIRCUITTHE CIRCUIT NUMBER SPECIFIED DOES NOT MATCH
NUMBER TOOTHE LIMITS OF THE CARD TYPE AT THE SPECIFIED
LARGE FORPHYSICAL LOCATION.
CARD TYPE(PHYLOC)
CLASS OFSIGNAL MODE 
- CLASS OF SERVICE
SERVICE NOTIF SIGNAL MODE IS ‘NO’, THEN THE FOLLOWING
ALLOWEDDISPLAYABLE CLASS OF SERVICE FEATURES WILL
NOT WORK:
1. TOLL ACCESS5. PAGING ACCESS
2. MEET-ME CONFERENCE6. MAINTENANCE
ACCESS
3. PROGRESSIVE CONF.7. MODEM ACCESS
4. DICTATION EQUIPMENT 8. MERS ON-NET
SVR 5210
8187D-481 
						

							-.-TL-130400-1001
Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGES1. EXECUTIVE OVERRIDE 5. DIAL CALL PICKUP
2. 
ORIG. CALL WAITING6. CALL FORWARDING-VAR
3. CAMP-ON/AUTO RECALL 7. SPEED CALLING
4. ATT. INFO CALLS8. UNIVERSAL 
NITE ANS.
IF THE SIGNAL MODE IS SOMETHING OTHER THAN
‘FP’ THEN THE FOLLOWING DISPLAYABLE CLASS OF
SERVICE FEATURE WILL NOT WORK:
IONS AND REQUIREMENTS
AND N-DISPLAYABLE
LASSES OF SERVICE MUST
APPEAR ONDD RECORDS.
SES OF SERVICE MUST
FEATURE, THE DIVERT CONDITIONS‘BY’,‘NA’,‘BN’,
AND‘DA’ WILL BEMEANINGLESS.
LD-57
::%:FCLASS OF SERVICE 
- DIVERT INFORMATION
FOR LINES WHICH DO NOT DIVERT (BUT WHICH ARE
CONFLICT IFIN A HUNT GROUP) THE DISPLAYABLE CLASS OF
HUNT GROUPSERVICE MUST NOT INCLUDE SWITCH DIRECT LINE
(‘SL’) OR CO LINE (‘CL’).
D-4828187SVR 5210 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
CLASS OF SERVICE 
-DIVERT INFORMATION
FOR LINES WHOSE DISPLAYABLE CLASS OF SERVICE
INCLUDES SWITCHED DIRECT LINE (‘SL’),
THE DIVERT DESTINATION SPECIFIED MUST BE A
LINE (‘LN’), AN ATTENDANT (‘AT’), A RECORDED
ANNOUNCEMENT (‘TR’), OR A TONE (‘TO’). A HUNT
GROUP PILOT NUMBER (‘PN’) IS PERMISSIBLE ONLY
IF THE HUNT GROUP SPECIFIED DOES NOT HAVE
CAMP-ON. IF A LINE’S DIVERT CONDITION IS ‘LN’
THEN THAT LINE’S DISPLAYABLE CLASS OF SERVICE
MUST HAVE STATION ACCESS 
(ISA’) SPECIFIED.
IF A LINE’S DIVERT CONDITION IS ‘AT’ THEN THAT
-DISPLAYABLE CLASS OF SERVICE MUST
TENDANT INFORMATION (‘Al’) SPECIFIED.
KUP TABLE SPECIFIED
ORRESPONDING ED
A. IF DESTINATION TYPE IS ‘LN’,
THE DESTINATION ID MUST BE A VALID STATION
NUMBER OR AN LD RECORD.
AN HG RECORD.
RECORDCODE
UST BE MARKED
IDMUSTBEA VALID TRUNK
SVR 5210
8h37D-483 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESATTENDANT
DIVERT INFORMATION
INATION TYPE IS ‘AT’,
ESTINATIONID MUST BE A VALID
OR ATTENDANTS ON AT RECORDS.
ISPLAYABLE
DEFINED ON FR
INCOMPATIBLE
WITH FCN OF
DEFINED ON
FRONTROLLING
FEATUREPHONEMUST BEENGINEERED AS A LINE
ON AN LD RECORD.
(TABGEN)
LD-71LINE CARD NOT LINE LOCATION
FOUNDTHE LINE CARD BEING ASSIGNED MUST BE
SPECIFIED ON AN FR OR LR 
REC??D(DEPENDENT ON THE SVR).
(GENLIN)
LD-72CANNOTINSTRUMENT TYPE / LINE TYPE
ASSIGN LINE ID
THERE MUST BE SPACE AVAILABLE IN THE SYSTEM
TABLES TO ASSIGN A LINE SOFTWARE ID IN THE
GIVEN PEC FOR ANY ‘BDML’, ‘DDML’, ‘DTML’, OR
‘FPML’ LINE CONTROLLED BY ANOTHER DIGITAL
PHONE OR FEATUREPHONE OR ANY LINES WITH A
LINE TYPE OF ‘NP’ OR ‘CO’.
A MAXIMUM OF 256 LINES OF ALL KINDS IS ALLOWED
PER PEC.
(GENLIN)
D-484
8187SVR 5210