GTE Omni Si Database Technical Practices Manual

							TL-130400-1001Table 21.1
CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
TWO-WAY TRUNK
GRED ON AN OD RECORD IN
TH A CODE TYPE OF ‘TGO’
OR ‘TGS’MUST HAVRUNK DIRECTION OF ‘OG’
PECIFIED ON THE Tl RECORD.
MEANINGLESS
EXPANDED OR CONFLICTING CODE CHECK TABLE
MUST BE SPECIFIED.
IF THE TOLL RESTRICTION IS ‘TL’ OR 
‘--I, THEN AN
NFLICTING CODE CHECK TABLE
T2-02ELEMENTS
HAVE
INCOMPATIBLE
VALUES
T2-02ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
T2-022ND FEATURE2ND FEATURE REQUIRED IF FIRST SPECIFIED.
REQUIRED IFTOLL ACCESS CODE INDICATOR 
- TOLL ACCESS
FIRSTCODE
SPECIFIEDVALUE OFALLOWABLE VALUES OF
ACCESS CODETOLL ACCESS CODE
INDICATORDIGITS
NM, OP, NR, OR0-- TO 999
_----
8187D-545 
						

							TL-130400-1001ZPG ERROR
MESSAGES
Table 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
T2-04VALUES TO BE
TOLL ACCESS CODE - SECOND TOLL ACCESS CODE
FILLED LEFT TOIF DIGIT 1 IS DASHED,
RIGHT
THEN DIGITS 2 AND 3 MUST BE DASHED.
.~_IF DIGIT 2 IS DASHED,
. . .THEN DIGIT 3 MUST BE DASHED.
T2-05 -SECONDTOLL ACCESS CODE - SECOND TOLL ACCESS CODE
ELEMENTTHESE FIELDS CANNOT BE THE SAME.
EQUALS FIRST
ELEMENT
T2-51DUPLICATE
TRUNK GROUP
NUMBER
T2-51TRUNK GROUPTRUNK GROUP NUMBER
NOT FOUND
A. TRUNK GROUP NUMBER MUST BE UNIQUE ACROSS
T2 RECORDS.
B. EACH TRUNK GROUP NUMBER APPEARING ON A T2
RECORD MUST ALSO APPEAR ON A 
Tl RECORD
C. EACH TRUNK GROUP NUMBER APPEARING ON A
Tl RECORD MUST APPEAR ON A T2 RECORD.
(ENDCHK)
T2-52CODE CHECKEXPANDED OR CONFLICTING CODE TABLE
TABLE NOTTHE EXPANDED OR CONFLICTING TABLE SELECTED
FOUNDMUST HAVE A CORRESPONDING EC RECORD TO
INITIALIZE THE TABLE.
T2-53
T2-54CODECODE RESTRICTION TABLE 
- 1+ RESTRICTION
RESTRICTION
TABLE NOT FOUND
TABLE NOTRESTRICTION TABLE NUMBERS MUST APPEAR ON A
FOUNDCR RECORD.
ILLEGAL VALUE
FOR DIC, PAG
OR REC APPL
D-5468187SVR 5210 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
APPLICATION‘REC’ OR ‘NIC’:
FIELD NAMEREQUIRED
VALUE
TRUNK TOLL RESTRICTION
_-TOLL ACCESS CODE
_--__SECOND TOLL ACCESS CODE
____-CODE RESTRICTION TABLE
EXPANDED OR CONFLICTING TABLE
-1 + RESTRICTION TABLE
2-WAY PAD CLASS
(DIC,PAG,NIC ONLY)
3-WAY PAD CLASS
----DTMF BLOCK TRANSMISSION
NREVERSE BATTERY CHECK
MESSAGE METER PEG
--TRUNK CALL 
QUEUEINGNREMOTE-ACCESS AUTHORIZATION CODE 
---QUEUE DOES
BERS MUST BE UNIQUE
SVR 5210
8h37D-547 
						

							T-L-1 30400-l 001Table 21.1CPG Error Messages (Continued)CPG ERROR
MESSAGES
XP-01
XP-o-1XP-02
XP-03
XP-03
D-548XP-04
XP-05
XP-52TITLE
VALUE OF
SECOND
ELEMENT TOO
LARGE
VALUE OF
SECOND
ELEMENT TOO
SMALL .
SECOND
ELEMENT
EQUALS FIRST
ELEMENT
INVALID
CHARACTER
STRING
SECOND
ELEMENT
CONTAINS
INVALID VALUE.
VALUE OF
SECOND
ELEMENT TOO
SMALL
VALUE OF
SECOND
ELEMENT TOO
SMALL
CARD TYPE
DEFINED ON FR
INCOMPATIBLE
WITH FCN OF
INCOMING
CARDDESCRIPTION OF MESSAGES
EXTENDED ADDRESSING 
- FRAME WINDOW SIZE
IF THE FRAME LEVEL SUPPORTS EXTENDED
ADDRESSINGFIELD IS ‘N’,
THEN THE FRAME WINDOW SIZE FIELD MUST BE IN
THE RANGE 1 TO 7.
X.25 DEVICE DIRECTLY CONNECTED 
- EXTERNAL.
CLOCKING
THEFIELD, IS X.25 DEVICE DIRECTLY CONNECTED,
CANNOT CONTAIN THE SAME VALUE AS THE
EXTERNAL CLOCKING FIELD.
ONE OR THE OTHER OF THESE FIELDS CAN BE
SPECIFIED (‘Y’), BUT NOT BOTH.
LOGICAL CHANNEL NUMBER ASSIGNMENTS (LCNS)
ALL SIX LCN ASSIGNMENT FIELDS MUST NOT
CONTAIN ZEROS.
LOW LCN 
- HIGH LCN
IF ANY OF THE LOW LCN STARTS WITH ‘OOOO’,
THEN THE MATCHING SET 
HIGN LCN SHOULD BE
‘0000’.
HIGH LOGICAL CHANNEL ASSIGNMENT FIELDS
THE HIGH LCN MUST BE GREATER THAN OR EQUAL
THE LOW LOCN ON INCOMING,
BI-DIRECTIONAL AND OUTGOING CHANNELS.
LOGICAL CHANNEL NUMBER ASSIGNMENTS
THE BI-DIRECTIONAL FIELDS’ VALUES MUST
CONTAIN LARGER NUMBER VALUES THAN THE
INCOMING FIELDS’.
THE OUTGOING FIELDS’ VALUES MUST CONTAIN
LARGER NUMBER VALUES
THAN THE BI-DIRECTIONAL FIELDS’ VALUES.
8187SVR 5210 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
DEFINED ON
FRINCOMPATIBLE
THE PEC, GROUP, SLOT, AND CIRCUIT FUNCTION
SPECIFIED MUST BE VALID FOR THE CARD TYPE
DEFINED ON FR (FOR THIS PEC TYPE).
A SYNCHRONOUS DATA PORT MUST APPEAR ON AN
ADMP OR NIC CARD OR A VPLO, 
VPLl, VP20 (VOICE
AND DATA OR DATA) OR VP21 LINE CARD.
PHYSICAL LOCATION
THE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED
MUST BE VALID FOR THIS PEC TYPE.
PHYSICAL LOCATION
DEFINED ON
XP-53OT, AND CIRCUIT SPECIFIED
DEFINED ON
MUST BE DEFINED ON AN LD RECORD
RECORD CODE(EXCEPT FOR THE PX25 PORT WHICH MUST BE
LD/CPDEFINED ON A CP RECORD).
USE OFPHYSICAL LOCATION
PHYSICAL LOCTHE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED
CONFLICTSMUST BE DEFINED ON AN LD RECORD WITH AN
WITH INSTR.INSTRUMENT TYPE OF ‘SPM’.
TYPE SPECIFIED (EXCEPT FOR THE PX25 PORT).
ON LD
XP-53PHYSICAL
PHYSICAL LOCATION
LOCATION NOTTHE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED
DEFINED ONMUST BE DEFINED ON A CP RECORD.
RECORD CODE(SVR 8220 AND BEYOND)
CPXP-53XP RECORDPHYSICAL LOCATION
APPLIES ONLYTHE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED
TO SYNCHMUST BE DEFINED ON A CP RECORD WITH A DEVICE
DEVICE TYPESTYPE OF ‘X25’, 
‘PX25’ OR ‘NIC ‘.ON CP
SVR 5210
8187D-549 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESAL LOCATION
MUST HAVE A
RATE OF 9600 OR LESS IF IT CONNECTS TO A VPLO
9600 OR LESS
A SYNCHRONOUS DATA PORT MUST SPECIFY A BAUD
COMBINATIONRATE OF 9600 OR LESS IF IT CONNECTS TO A VPLO
OR VP20 LINE CARD.
BE 
‘Y’ FOR DEVICE TYPE
RD CODE CP.
R DEVICE TYPES, ONE OF THE FIELDS
XP-58NIC REQUIRESTHE ABOVE FIELDS MUST BE ‘N’ FOR DEVICE TYPE
FIELD TO BE N
‘NIC’ ON RECORD CODE CP.
DEVICE TYPEX.25 SPEED SELF-EXPLANATORY
NIC REQUIRES
X.25 SPEED TO
BE 5 TO 8
XP-82PHYSICALPHYSICAL LOCATION
LOCATION ISEVERY SYNCHRONOUS DATA PORT APPEARING ON
MISSING ONAN LD AND CP RECORD MUST APPEAR ON AN XP
NAMED
RECORD.
RECORD CODEEVERY NIC APPEARING ON A TC AND CP RECORD
MUST APPEAR ON AN XP RECORD.
(ENDCHK)
D-5508187SVR 5210 
						

							TL-I 30400-l 001
ALPHABETICAL INDEX OF RECORD CODES
AC:
AD:
AF:AG:
AL:
AP:
AQ:AS:
AT;-AU:
BD:
BK:Cl:
c2:
CA:CB:
CD:
CF:CH:
CL:CN:
CP:
CR:
CT:
DA:
DC:
DD:
DF:
DK:
DT:
EC:
ED:
FA:
FR:
GC:
GS:HD:
HG:
HM:
II:
IR:
KD:
KS:
LA:
LD:
LI:LM:
LP:Access Code Translation, D-80
Agent Position, D-306
Limited Automatic Call Distribution Feature, D-308
Agent Group, D-310
Audit Record Control, D-296
Data System Asynchronous Port, D-340
Data System Asynchronous Port Set/Read List, D-359
Allowable Service Codes, D-208
Attendant Console, D-1 62
Remote Access Authorization Code, D-75
BLDU, D-l 66
Busy Lamp Key, D-168
Data System Call Processing 
- Part 1, D-379
Data System Call Processing 
- Part 2, D-383
Common Attendant, D-l 69
Code Blocked Numbers, D-74
Code Call, D-72
CAS Branch Features, D-304
Change Feature by Access Code, D-140
Class of Call-Controlled Routing, D-288
Common Attendant Directory Numbers, D-l 74
Data System Common Port, D-334
Code Restriction Numbers, D-203
Customer Defined Terminal, D-268
Trunk Group Digit Absorption, D-217
Displayable Class of Service, D-l 14
Displayable Class of Service, D-l 16
CPG Default, D-142
Repertory Dial Key Code, D-315
DTMF Receiver, D-42
Expanded or Conflicting Code Check Tables, D-206
Extended Dial-Call Pick up Numbers, D-138
FRL Auorization Code, D-77
Frame Image Card, D-25
Group Speed Calling, D-134
Group Speed Calling List Numbers, D-136
Hundreds Groups, D-l 04
Hunt Group, D-130
Health Care/Motel Miscellaneous, D-274
International Country Code, D-l 12
Intercept Routing Numbers, D-106
KEDU Assignment, D-277
KEDU Special Function Access, D-279
Line Appearances, D-l 58
Line Data, D-144
Line Identities, D-l 60
Line Miscellaneous, D-l 53
Prefix Code Digits for Listed Directory Numbers and Other Applications, D-249
F=TL-130000-1001 O=TL-130100-1001M=TL-130200-1001I=TL-130300-1001D=TL-130400-1001S=TL-130500-1001A=TL-100000-1001
FeatWeOperationMaintenanceInstallationData BaseSystem Configuration ADMP Users Guide 
						

							TL-130400-1001
MD:
MH:
MK:
MO:
MR:
MS:
MT:
NA:
NC:
NR:g.
OD;
OE:
OF:
OT:ov:
Pl:
P2:
PC:
PD:PN:
PZ:
RA:
F-c:RN:
RP:
RT:
Sl:s2:
SA:
SD:
SI:
SL:
$’SR:
ST:
Tl:
T2:
TC:
TD:
TF:
TL:TM:
TN:
TP:TR:
TT:
WT:
XP:MDR, D-260
Hunt Group Members, D-l 32
Master KEDU, D-281
MERS On-Net Station Numbers and Sending Instruction Values, D-250
MERS Six-Digit Translated NPA, D-220
SCC Authorization Codes, D-248
MDR Port, D-262
Nailed Trunk Connection, D-21 5
N-Displayable COS, D-l 20
MERS Three-Digit Translated NPA, D-239
Private Network Translation, D-254
Office Features Circuits, D-43
Other Directory Numbers, D-63
Office 
Equipment, D-44
Office Features, D-48
Office Timeout Values, D-55
Office Timing Values, D-60
Data System Global Parameter 
- Part 1, D-372
Data System Global Parameter 
- Part 2, D-375
Prefix Code Digits, D-245
Printer Assignment, D-284
PNA Pilot Numbers, D-65
Paging Zones, D-66
Recorder Announcer, D-323
Release Link Trunk Circuit, D-317
Room Number First Digit Translation, D-286
MERS Routing List, D-227
Data System Routing, D-330
MDR Screening Option 1, D-263
MDR Screening Option 2, D-264
Specialized Common Carrier, D-l 09
CAS Secondary Directory Numbers, D-326
MERS Sending Instruction, D-231
User Security Level Password, D-68
Source Messages, D-31 9
Special Messages, D-320
Data System Symbolic Replacement Word/String, D-385
Service Code MERS Translation, D-243
Trunk Group Part 1, D-176
Trunk Group Part 2, D-186
Trunk Circuit, D-21 0
Private Network 
Dl/D2, D-256
Traffic Data Facilities, D-70
Translation Record Control, D-290
Supervisor Talk/Monitor Repertory Dial Key Code, D-321
Tone Detector, D-247
MERS Time Period, D-242
MERS Numbering Plan Area/ABC Translation, D-234
Serial Device, D-271
Ward Control, D-301
Data System X.25 Port, D-366
F=TL-130000-1001 O=TL-130100-1001M =TL-130200-1001I=TL-130300-1001D=TL-130400-1001S=TL-130500-1001A=TL-100000-1001‘,
FeattIreSOperationMaintenanceInstallationData BaseSystem Configuration ADMP Users Guide 
						

							TL-130400-1001INDEX
AABC Code Range, D-236
Access 
Code---Digits l-3, D-81
Agent Call 
Hoid Timeout, D-62
Agent Call Park Timeout, D-62
Agent Group, D-302_
Agent Group 
Number (Record Code AG), D-311
Agent Group Number (Record Code 
Tl), D-183
Agent Hands-Free Operation, D-314
Agent Position Number, D-302
Agent Transfer, D-31 4
AIOD Channel, D-181
Alert Tone, D-314
Allow Agent to Originate Calls on Line 
1, D-307
Allowable Three-Digit Numbering Plan Area/ABC Code Numbers, D-205
Alternate Divert Destination, D-31 2
Alternate Divert Destination Identifier, D-31 2
Alternate Divert Destination Timing, D-31 2
Alternate Recorder Announcer 
#l , D-324
Alternate Recorder Announcer 
#2, D-324
Alternate Trunk Group, D-181
Answer Back Recorder Announcer, D-183
Appearance Type, D-l 59
Attendant Assignment for Room-to-Room Blocking Function, D-l 71
Attendant Break-In, D-171
Attendant Call Waiting Lamp Light and Flash, D-170
Attendant Call Waiting Queue, D-57
Attendant Camp-on, D-171
Attendant Console Number, D-l 74
Attendant Directory Number, D-l 74
Attendant Do Not Disturb Key, D-173
F=TL-130000-1001 O=TL-130100-1001M=TL-130200-1001I=TL-130300-1001D=TL-130400-1001S=TL-130500-1001A=TL-100000-1001
FeaturesOperationMaintenanceInstallationData Base
SyStem Configuration ADMP Users Guide 
						

							TL-130400-1001
Attendant Message Waiting Key, D-173
Attendant No Answer Time, D-58
Attendant Paging, D-171
Attendant Paging Areas, D-67
Attendant-Paging Queue, D-l 71
Attendant-Recall After No Answer Timeout, D-l 93
Attendant Room Blocking Key, D-173
Attendant Three-Way SplitiThree-Way Connection, D-172
Authorization Code Digits, D-78
Authorization Code Digits 1-4, D-76
Authorization Code Number, D-76
Authorization Number, D-l 10
Authorization Prefix Digits, D-52
Automatic Call Distribution Pilot Numbers 1-4, D-309
Automatic Call Distribution/Direct In Line 
(ACD/DIL) Trunk Pilot Number, D-183
Automatic Circuit Assurance, D-184
Automatic Output Indicator, D-71
Automatic Recall on Hold, D-171
Baud Rate, D-285
Begin Time (Record Code TP), D-242
Begin Time (Record Code WT), D-302
Billing Mode, D-181
Billing Number, D-165
Block Transmission, D-l 92
BLDU Data Link Llnes, D-167
BLDU Key Identities, D-168
Busy Lamp Display Unit Number, D-164
Busy Lamp Display Units, D-172
Bypass Toll Restriction Checks on Final Directory Number, D-111
F =TL-130000-1001
O=TL-130100-1001M=TL-130200-1001I =TL-130300-1001D=TL-130400-1001S=TL-130500-1001A=TL-100000-1001FeaturesOperationMaintenanceInstallationData BaseSystem Configuration ADMP Users Guide