GTE Omni Si Database Technical Practices Manual

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESCHECK TO MAKE SURE TWO JOBS WITH THE SAME
HAS INVALIDIT WILL NOT BE CHECKED FOR ERRORS.
RECORDCODE
CORRESPOND TO THE FORM SEQUENCE NUMBER.
NUMBER 
- IT
CHECK THE 
INREC NAME FOR CORRECTNESS.
CHECK THE LIB PARAMETER IN THE JCL TO MAKE
SURE THECORRECT 
PANVALET LIBRARYISBEING
BE USEDDASHES MUST BE CONSISTENT FOR EACH FUNCTION
CONSISTENTLY SECURITY CODE.
IN FIELD
MK-51MASTER KEDUTHE MASTER KEDU NUMBER SPECIFIED MUST BE A
NUMBER NOTVALID KEDU NUMBER DEFINED ON A KD RECORD.
FOUND
MO-01INVALID
CHARACTER
PATTERN IN
2ND FIELD
MO-01SECOND FIELDUSAGE FIELDS - INSTRUCTION/INDEX FIELDS
MUST BE ---IF A PARTICULAR USAGE FIELD IS DASHED, THEN THE
IF FIRST FIELDCORRESPONDING INSTRUCTION/INDEX FIELD MUST
IS 
-BE DASHED.
SVR 5210
8/87D-495 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESPREFIX INDEX
PREFIX INDEX
NOT FOUND ONREFIX INDEX IS SPECIFIED ON AN MO RECORD,
IT SHOULD BE SPECIFIED ON A PC RECORD
ELEMENT TOO
ON-NET MERS CODESMUST BENUMBEREDFROM
CHARACTER
ALLOWABLE VALUESFOR ANON-NET CODEARE
ALL MR RECORDS.
CONSOLIDATE THE NPAS USING THE LIKENPA.
ROUTING. ONE OF THESE TABLES IS USED FOR 
3-DIGIT NPA TRANSLATION, SO THE REMAINING THREE
TABLES MAY BE USED FOR 6-DIGIT TRANSLATION
CONTAINING CONFLICT CODES.
DATE THE NPAS USING THE LIKE NPA.
D-4968h37SVR 5210 
						

							-:CPG 
ERRQRMESSAGES
MR-53
MR-55
. . . .
MR-56
MR-57
MS-01
MS-50
MS-51
MS-51NA-53
NA-54
SVR 5210
Table 21.1TITLE
IUPLICATE NPA
ZODE
blERS NPA NOT
PREVIOUSLY
DEFINED
.
VALUES MUST
BECONTINUOUS
FIELD DOES
NOT HAVE
REQUIRED
VALUE
VALUES TO BE
FILLED LEFT TO
RIGHT
MDR WORK
GROUP 
& SCC
ID NUMBER
DUPLICATED
MAXIMUM
NUMBER OF
UNIQUE
AUTHORIZATION CODES
EXCEEDED
MDR WORK
GROUP NO NOT
FOUND ON LD
FORM
TRUNK GROUP
- HAS INVALID
N-DISP CLASS
OF SERVICE
MARK
DUPLICATE
TRUNK
NUMBERTL-130400-1001
CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
THE MERS NPA NUMBER OCCURRED ON A PREVIOUS
MR RECORD.
THE LIKE NPA CODE HAS NOT BEEN SPECIFIED AS A
MERS NPA CODE ON A PREVIOUS MR RECORD.
THIS CHECK DOES NOT INVOLVE MERS NPAS ON THE
MR, NT, OR TD RECORDS.
(GENDIG)
MERS NPA INDEX
GAPS ARE NOT ALLOWED IN THE MERS NPA
NUMBER.
(ENDCHK)
IF AN MR RECORD INDICATES CONFLICT CODES,
THEN MERS 1 + DIALING MUST BE 
‘Y’ ON THE OF
RECORD.
AUTHORIZATION CODE DIGITS
IF THE AUTHORIZATION CODE IS LESS THAN TEN
DIGITS,
THEN THE DIGITS MUST BE PACKED TO THE LEFT
WITH THE REMAINING FIELDS DASHED.
MDR WORK GROUP 
- SCC ID NUMBER
DUPLICATE MDR WORK GROUP AND SCC ID NUMBER
COMBINATION IS NOT ALLOWED.
THE TOTAL NUMBER OF SCC AUTHORIZATION CODES
MUST NOT BE GREATER THAN THE SYSTEM LIMIT OF
255.(TABGEN/GENDIG)
MDR WORK GROUP NUMBER
IF A MDR WORK GROUP IS REFERENCED ON AN MS
RECORD, THEN THAT MDR WORK GROUP SHOULD BE
DEFINED ON AN LD RECORD.
THE TRUNK GROUP SPECIFIED ON RECORD NA
(FROM/TO) MUST CORRESPOND TO A TRUNK GROUP
ON RECORD 
Tl, HAVING AN N-DISPLAYABLE CLASS
OF SERVICE WHICH INDICATES DATA LINE SECURITY.
THE TO OR FROM TRUNK WAS SPECIFIED ON A
PREVIOUS NA RECORD.
8187D-497 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
IN SPECIFIED
THE TRUNK GROUP ON A TC RECORD.
ST APPEAR IN A NAILED
N ANNA RECORD.
LISTED FORM
UNK NUMBER
NC-01ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
NC-51DUPLICATE N-N-DISPLAYABLE CLASS OF SERVICE NUMBER MUST
DISPLAYABLE
BE UNIQUE ACROSS THE NC RECORDS. FOR
CLASS OFVIOLATION AND RESTRICTION PATTERNS BETWEEN
SERVICE DATA
DISPLAYABLE AND N-DISPLAYABLE CLASSES OF
SERVICE, SEE APPENDIX 1.
D-4988187SVR 5210 
						

							.TL-130400-1001Table 21.1
CPG Error Messages (Continued)THE STATION SILENT MONITOR ACCESS FIELD
ND RESTRICTION
PATTERNS
THAN FIRST
EQUAL FIRST
NR-02DASHES MUSTIN TIME PERIODS 1 TO 3, THE SENDING INSTRUCTION
BE USEDLIST NUMBER AND THE ROUTING LIST NUMBER MUST
CONSISTENTLY
BOTH BE DASHES OR BOTH CONTAIN VALID VALUES.
IN FIELD
NR-51CODE RANGETHE NPA CODE RANGE FIELDS CONTAIN A THREE
INCLUDESDIGIT CODE THAT IS NOT AN NPA CODE.
INVALID NPASPLIT THE NPA DATA INTO MULTIPLE NR RECORDS
TO AVOID THE INVALID NPA.
(GENDIG)
NR-52SENDINGA SENDING INSTRUCTION LIST NUMBER USED ON AN
INSTRUCTIONNR RECORD WAS NOT DEFINED ON AN SI RECORD.
NOT DEFINED
NR-53
NR-54ROUTING LISTA ROUTING LIST NUMBER USED ON AN NR RECORD
NOT DEFINEDWAS NOT DEFINED ON AN RP RECORD.
DUPLICATE NPAAN NPA CODE SPECIFIED ON THE NR RECORD WAS
ENTRYALREADY SPECIFIED.
(GENDIG
NR-55NPA CODEAN NPA CODE ON THE NR RECORD WAS ALREADY
SPECIFIED ONSPECIFIED AS A 6-DIGIT TRANSLATED NPA CODE ON
MR FORMAN MR RECORD.
(GENDIG)
SVR 5210
$187D-499 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESTED TIME PERIOD
ALL RECORDS
VEIDENTICAL VALUES FOR TIME
SELECT ORDER.
IT IS POSSIBLE TO HAVE ERRONEOUS VALUES IN THE
NUMBER OFROUTING LIST OR SENDING INSTRUCTIONS IF THEY
DONOT HAVE THESAMENUMBER OF SELECT
(RECORD CODESRP AND 
Tl) WITH ANOUTGOING
INDEX (RECORD CODES St, LP AND/ OR PC) THAT
SPECIFIES THE OUTPULSING OF 
DlGlTS ’ # ’ AND/OR
D-5008187SVR 5210 
						

							. . .SVR 5210
8187D-501TL-130400-1001
Table 21.1CPG Error Messages (Continued)
>PG ERROR
MESSAGESTITLEDESCRIPTION OF MESSAGES
NT-012ND FEATURETRANSLATION TYPE
REQUIRED IFGIVEN A CERTAIN TRANSLATION TYPE, THE SELECT
FIRSTTRUNK GROUP, THE NUMBER OF 
DIGI TS
Sf%ClFlEDOUTPULSED, SENDING INSTRUCTION, AND ROUTING. . .LIST FIELDS MUST BE AS FOLLOWS:
TRANS-SELECT NO. OFSENDINGROUTING
LATIONTRUNK DIGITSINSTRLIST
TYPEOUTPULSED
LOC -- ---MRS -- 
---TGS00-63 
-_-DGT -- 
---ABC -- 
---
TGO00-631-15 --
MRN -- 
---MER -- 
-01-31o-7NT-02ELEMENTS
HAVE
INCOMPATIBLE
VALUES
NT-02ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
NT-022ND FEATUREMERS ON-NET LIKE NPA
REQUIRED IFFOR ALL TRANSLATION TYPES EXCEPT MRN, THE
FIRSTMERS LIKE NPA FIELD MUST BE DASHES.
SPECIFIEDTHE LIKE NPA FIELD MUST BE SPECIFIED FOR
TRANSLATION TYPE MRN.
NT-04SECONDIN THE CODE RANGE FIELDS THE SECOND CODE IS
ELEMENT LESSLESS THAN OR EQUAL TO THE FIRST CODE.
THAN FIRST
ELEMENT.
SECOND
ELEMENT
EQUALS FIRST
ELEMENT.
NT-51DUPLICATETHE TRANSLATION ENTRY NUMBER MUST BE
TRANSLATIONUNIQUE.
ENTRY NUMBER 
						

							TL-130400-1001
CPG ERROR
MESSAGES I
NT-52. . .NT-53
NT-54
NT-54
NT-55
NT-56
NT-57
NT-58
NT-59
NT-61NT-62
D-502
Table 21.1CPG Error Messages (Continued)TITLE
FIELD
CONFLICTS
WITH TRUNK
APPLICATION
TRUNK GROUP
NOT FOUND
DUPLICATE ABC
ENTRY
DUPLICATE
NPA/OFFICE/SE
RVICE CODE
MERS NPA OR
3N-NET CODE
NOT ON MR
FORMTIME PERIOD
DATAREQUIRED
TIME PERIOD
NOT FOUND
TIME PERIOD
VALUES MUST
MATCH ACROSS
ALL RECORDS
ROUTE
LIST/SEND
INSTR DO NOT
HAVE SAME
NUMBER OF
SELECT
ORDERS
ONLY 4 UNIQUE
NPAS ALLOWED
SENDING
INSTRUCTION
LIST NOT
FOUNDDESCRIPTION OF MESSAGES
THE TRUNK APPLICATION CANNOT BE DIC, PAG, REC
OR NIC.
THE SELECT TRUNK GROUP MUST BE FOUND ON THE
Tl RECORD.
THE CODE RANGES SPECIFIED MUST BE UNIQUE
ACROSS ALL NT RECORDS.
(GENDIG)
THE NPA OR OFFICE CODE MUST BE UNIQUE ACROSS
ALL NT RECORDS.
THE NPA SPECIFIED IN THE LIKE NPA MUST BE
FOUND ON THE MR RECORD.
(GENDIG)
THE TIME PERIOD WAS SPECIFIED ON A TP RECORD.
THEREFORE DATA FOR THE INDICATED TIME PERIOD
IS REQUIRED ON THE NT RECORD.
THE NT RECORD SPECIFIED VALUES FOR A TIME
PERIOD WHICH WAS NOT SPECIFIED ON A TP
RECORD.
IF SEVERAL NT, NR, AND TR RECORDS HAVE THE
SAME SENDING INSTRUCTION LIST NUMBER AND
ROUTING LIST NUMBER FOR TIME PERIOD 0,
THEY MUST ALSO HAVE IDENTICAL VALUES FOR TIME
PERIODS 1, 2, AND 3.
A ROUTING LIST SENDING INSTRUCTION
COMBINATION DOES NOT MATCH IN THE NUMBER OF
SELECT ORDER.
IT IS POSSIBLE TO HAVE ERRONEOUS VALUES IN THE
ROUTING LIST OR SENDING INSTRUCTIONS IF THEY
DO NOT HAVE THE SAME NUMBER OF SELECT
ORDERS.
ONLY FOUR UNIQUE NPAS ARE ALLOWED BETWEEN
MR, NT, AND TD RECORDS.
(GENDIG)
THE SENDING INSTRUCTION LIST MUST BE
ENGINEERED ON RECORD CODES.
8187SVR 5210 
						

							TL-130400-1004Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGES(RECORD CODES SI, LP AND/ ORPC) THAT
FIES THE OUTPULSING OF DIGITS ‘ # ’ AND/OR
SLOT, AND EQUIPMENT STATUS) FOR 
MUSIC-ON-INCOMPATIBLE
WITH INCOMING
CARD TYPE
oc-54FUNCTION OFPHYSICAL LOCATION
CARD NOTTHE PEC, GROUP, SLOT AND CIRCUIT FUNCTION
ALLOWED FORSPECIFIED MUST BE VALID FOR THE CARD TYPE
CARD TYPEDEFINED ON FR (FOR THIS PEC TYPE).
DEFINED ONTHE MUSIC ON HOLD CIRCUIT MUST APPEAR ON A
FORM FRPOTS OR OFFP LINE CARD.
(PHYLOC)
IF THE CARD TYPE IN THE MESSAGE IS “OVER”, THAT
INDICATES THAT A CARD IN THE PREVIOUS LOCATION
IS A WIDE CARD AND IT OVERHANGS INTO THIS
PYHSICAL LOCATION ON FR.
oc-54NONEXISTENTPHYSICAL LOCATION
PHYSICALTHE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED
LOCATIONMUST BE VALID FOR THIS PEC TYPE.
(PHYLOC)
SVR 5210
8187D-503 
						

							TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESPHYSICAL LOCATION
UP,SLOT AND CIRCUIT SPECIFIED FOR
C ON HOLD CIRCUIT MUST BE UNIQUE.
TS.OF THE TWO SLOTSIT FILLS,
THE RIGHT HAND ONE HAS ALREADY BEEN FILLED.
OVERSIZED CARD. THE RIGHT HALF OF THAT CARD
FILLS THIS SLOT.
INTO THIS SLOT
ARD FOR THE 
MU&C ON HOLD CIRCUIT WAS
NOT SPECIFIED ON AN FR RECORD
(PHYLOC)
OD-01VALUE OF
SECOND
ELEMENT TOO
LARGE
D-5048187SVR 5210