Home > Husqvarna > Chainsaw > Husqvarna 135 X Torq Manual

Husqvarna 135 X Torq Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Husqvarna 135 X Torq Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 35 Husqvarna manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    135, 135e
    135e TrioBrake 
    DK Brugsanvisning,   
    NO Bruksanvisning,   
    FI Käyttöohje,   
    Lieto‰anas pamÇc¥ba  
    Naudojimosi instrukcijos  
    Navodila za uporabo  
    EN Operator's Manual,  
    FR Manuel d'utilisation,  
    NL Gebruiksaanwijzing,  
    IT Istruzioni per l’uso,  
    ES Manual de instrucciones,  
    DE Bedienungsanweisung,  
    PT Instruções para o uso,  
    SE Bruksanvisning,  
    1155296-38 Rev.1 2012-11-19
     3 1155296-38 Rev.1 2012-11-19
    3233 26
    37 36
    4041 34 
    1155296-38 Rev.1 2012-11-19
    4847 46 4544
    5958 5756 55
    61 6263
     5 1155296-38 Rev.1 2012-11-19
    1155296-38 Rev.1 2012-11-19
    1155296-38 Rev.1 2012-11-19
    Symbols on the machine: 
    WARNING! Chain saws can be 
    dangerous! Careless or incorrect use can 
    result in serious or fatal injury to the 
    operator or others.
    Please read the operator’s manual 
    carefully and make sure you 
    understand the instructions before 
    using the machine.
    Always wear:
    • Approved protective helmet
    • Approved hearing protection
    • Protective goggles or a visor
    This product is in accordance with 
    applicable EC directives.
    Noise emission to the environment 
    according to the European 
    Community’s Directive. The machine’s 
    emission is specified in the Technical 
    data chapter and on the label.
    WARNING! Kickback may occur when 
    the nose or tip of the guide bar touches 
    an object, and cause a lightning fast 
    reverse reaction, kicking the guide bar 
    up and towards the operator. May cause 
    serious personal injury. 
    Chain brake, activated (right) Chain 
    brake, not activated (left)
    Chain oil fill. 
    Ignition; choke: 
     Set the choke control 
    in the choke position. This should 
    automatically set the stop switch to the 
    start position.
    Air purge 
    Other symbols/decals on the machine refer to special 
    certification requirements for certain markets. 
    Symbols in the operator’s 
    Switch off the engine before 
    carrying out any checks or 
    maintenance. CAUTION! The 
    start/stop switch automatically 
    returns to run position. In order to 
    prevent unintentional starting, the 
    spark plug cap must be removed 
    from the spark plug when 
    assembling, checking and/or 
    performing maintenance. 
    Always wear approved protective 
    Regular cleaning is required.
    Visual check.
    Protective goggles or a visor must be 
    Filling with oil and adjusting oil flow.
    The chain brake must be engaged 
    when the chain saw is started.
    WARNING! Kickback may occur when 
    the nose or tip of the guide bar touches 
    an object, and cause a lightning fast 
    reverse reaction, kicking the guide bar 
    up and towards the operator. May cause 
    serious personal injury.  
    8 – English
    1155296-38 Rev.1 2012-11-19
    Dear Customer, 
    Congratulations on your choice to buy a Husqvarna 
    product! Husqvarna is based on a tradition that dates 
    back to 1689, when the Swedish King Karl XI ordered the 
    construction of a factory on the banks of the Husqvarna 
    River, for production of muskets. The location was logical, 
    since water power was harnessed from the Huskvarna 
    River to create the water-powered plant. During the more 
    than 300 years in existence, the Husqvarna factory has 
    produced a lot of different products, from wood stoves to 
    modern kitchen appliances, sewing machines, bicycles, 
    motorcycles etc. In 1956, the first motor driven lawn 
    mowers appeared, followed by chain saws in 1959, and it 
    is within this area Husqvarna is working today.
    Today Husqvarna is one of the leading manufacturers in 
    the world of forest and garden products, with quality as 
    our highest priority. The business concept is to develop, 
    manufacture and market motor-driven products for 
    forestry and gardening, as well as for the building and 
    construction industry. Husqvarna 
    s aim is also to be at the 
    front edge for ergonomics, usability, security and 
    environmental protection. That is the reason why we have 
    developed many different features to add to our products 
    within these areas.
    We are convinced that you will appreciate with great 
    satisfaction the quality and performance of our product for 
    a very long time to come. The purchase of one of our 
    products gives you access to professional help with 
    repairs and service whenever this may be necessary. If 
    the retailer who sells your machine is not one of our 
    authorised dealers, ask for the address of your nearest 
    service workshop.
    It is our wish that you will be satisfied with your product 
    and that it will be your companion for a long time. Think of 
    this operator 
    s manual as a valuable document. By 
    following its content (usage, service, maintenance, etc), 
    the life span and the second-hand value of the machine 
    can be extended. If you sell this machine, make sure that 
    the operator 
    s manual is passed on to the buyer.
    Thank you for using a Husqvarna product.
    Husqvarna AB has a policy of continuous product 
    development and therefore reserves the right to modify 
    the design and appearance of products without prior 
    What is what on the chain saw? (1)  
    1 Cylinder cover
    2 Air purge
    3 Start reminder
    4 Right-hand brake trigger (135e TrioBrake)
    5 Combined start and stop switch
    6 Information and warning decal
    7 Fuel tank
    8 Adjuster screws carburettor
    9 Starter handle
    10 Starter
    11 Chain oil tank
    12 Product and serial number plate
    13 Felling direction mark
    14 Front handle
    15 Front hand guard
    16 Muffler
    17 Saw chain
    18 Bar tip sprocket
    19 Guide bar
    20 Spike bumper
    21 Chain catcher
    22 Chain tensioning screw
    23 Clutch cover (135) 
    24 Rear handle with right hand guard
    25 Throttle trigger
    26 Throttle lockout
    27 Clutch cover (135e, 135e TrioBrake) 
    28 Chain tensioner wheel
    29 Knob
    30 Operator  
    s manual
    31 Guide bar cover
    32 Combination spanner 
    1155296-38 Rev.1 2012-11-19
    Before using a new chain saw 
    • Please read this manual carefully.
     refer to figures on p. 2-6.
    • Check that the cutting equipment is correctly fitted and 
    adjusted. See instructions under the heading 
    • Refuel and start the chain saw. See the instructions 
    under the headings Fuel Handling and Starting and 
    • Do not use the chain saw until sufficient chain oil has 
    reached the chain. See instructions under the heading 
    Cutting equipment.
    • Long-term exposure to noise can result in permanent 
    hearing impairment. So always use approved hearing 
    WARNING! Under no circumstances may 
    the design of the machine be modified 
    without the permission of the 
    manufacturer. Always use original 
    accessories. Non-authorized 
    modifications and/or accessories can 
    result in serious personal injury or the 
    death of the operator or others.
    WARNING! A chain saw is a dangerous 
    tool if used carelessly or incorrectly and 
    can cause serious, even fatal injuries. It 
    is very important that you read and 
    understand the contents of this 
    operator’s manual.
    WARNING! The inside of the muffler 
    contain chemicals that may be 
    carcinogenic. Avoid contact with these 
    elements in the event of a damaged 
    WARNING! Long term inhalation of the 
    engine’s exhaust fumes, chain oil mist 
    and dust from sawdust can represent a 
    health risk.
    WARNING! This machine produces an 
    electromagnetic field during operation. 
    This field may under some 
    circumstances interfere with active or 
    passive medical implants. To reduce the 
    risk of serious or fatal injury, we 
    recommend persons with medical 
    implants to consult their physician and 
    the medical implant manufacturer before 
    operating this machine.
    WARNING! Never allow children to use or 
    be in the vicinity of the machine. As the 
    machine is equipped with a spring-
    loaded stop switch and can be started by 
    low speed and force on the starter 
    handle, even small children under some 
    circumstances can produce the force 
    necessary to start the machine. This can 
    mean a risk of serious personal injury. 
    Therefore remove the spark plug cap 
    when the machine is not under close 
    This chain saw for forest service is designed for forest 
    work such as felling, limbing and cutting.
    You should only use the saw with the bar and chain 
    combinations we recommend in the chapter Technical 
    Never use the machine if you are fatigued, while under 
    the influence of alcohol or drugs, medication or anything 
    that could affect your vision, alertness, coordination or 
    Wear personal protective equipment. See instructions 
    under the ”Personal protective equipment” heading.
    Do not modify this product or use it if it appears to have 
    been modified by others.
    Never use a machine that is faulty. Carry out the safety 
    checks, maintenance and service instructions 
    described in this manual. Some maintenance and 
    service measures must be carried out by trained and 
    qualified specialists. See instructions under the 
    Maintenance heading.
    Never use any accessories other than those 
    recommended in this manual. See instructions under 
    the headings Cutting equipment and Technical data.
    CAUTION! Always wear protective glasses or a face 
    visor to reduce the risk of injury from thrown objects. A 
    chain saw is capable of throwing objects, such as wood 
    chips, small pieces of wood, etc, at great force. This can 
    result in serious injury, especially to the eyes.
    WARNING! Running an engine in a 
    confined or badly ventilated area can 
    result in death due to asphyxiation or 
    carbon monoxide poisoning.
    WARNING! Faulty cutting equipment or 
    the wrong combination of bar and saw 
    chain increases the risk of kickback! 
    Only use the bar/saw chain combinations 
    we recommend, and follow the 
    10 – English
    1155296-38 Rev.1 2012-11-19
    Always use common sense (2) 
    It is not possible to cover every conceivable situation you 
    can face when using a chain saw. Always exercise care 
    and use your common sense. Avoid all situations which 
    you consider to be beyond your capability.  If you still feel 
    uncertain about operating procedures after reading these 
    instructions, you should consult an expert before 
    continuing. Do not hesitate to contact your dealer or us if 
    you have any questions about the use of the chain saw. 
    We will willingly be of service and provide you with advice 
    as well as help you to use your chain saw both efficiently 
    and safely. Attend a training course in chain saw usage if 
    possible. Your dealer, forestry school or your library can 
    provide information about which training materials and 
    courses are available. Work is constantly in progress to 
    improve the design and technology - improvements that 
    increase your safety and efficiency. Visit your dealer 
    regularly to see whether you can benefit from new 
    features that have been introduced. 
    Personal protective equipment 
    • Approved protective helmet
    • Hearing protection
    • Protective goggles or a visor
    • Gloves with saw protection
    • Trousers with saw protection
    • Boots with saw protection, steel toe-cap and non-slip 
    • Always have a first aid kit nearby.
    • Fire Extinguisher and Shovel
    Generally clothes should be close-fitting without 
    restricting your freedom of movement. 
    ′′′ ′ 
    s safety equipment 
    In this section the machine’s safety features and their 
    function are explained. For inspection and maintenance 
    see instructions under the heading Checking, maintaining 
    and servicing chain saw safety equipment. See 
    instructions under the heading, What is what?, to find 
    where these parts are located on your machine.The life span of the machine can be reduced and the risk 
    of accidents can increase if machine maintenance is not 
    carried out correctly and if service and/or repairs are not 
    carried out professionally. If you need further information 
    please contact your nearest service workshop. 
    Chain brake and front hand guard 
    Your chain saw is equipped with a chain brake that is 
    designed to stop the chain if you get a kickback. The chain 
    brake reduces the risk of accidents, but only you can 
    prevent them.  
    Take care when using your saw and make sure the 
    kickback zone of the bar never touches any object.  
    • The chain brake (A) can either be activated manually 
    (by your left hand) or automatically by the inertia 
    release mechanism.  
    • The brake is applied when the front hand guard (B) is 
    pushed forwards or when the right-hand brake trigger 
    (E) is pushed up and forwards.  
    • This movement activates a spring-loaded mechanism 
    that tightens the brake band (C) around the engine 
    drive system (D) (clutch drum).  
    • The front hand guard is not designed solely to activate 
    the chain brake. Another important feature is that it 
    reduces the risk of your left hand hitting the chain if 
    you lose grip of the front handle.
    • The chain brake must be engaged when the chain 
    saw is started to prevent the saw chain from rotating.  
    • Use the chain brake as a ”parking brake” when 
    starting and when moving over short distances, to 
    reduce the risk of moving chain accidentally hitting 
    your leg or anyone or anything close by. Do not leave 
    the chain saw switched on with the chain brake 
    activated for long periods. The chain saw can become 
    very hot.
    • The chain brake is released by moving the front hand 
    guard marked ”PULL BACK TO RESET” back, 
    towards the front handle.   
    • Kickback can be very sudden and violent. Most 
    kickbacks are minor and do not always activate the 
    chain brake. If this happens you should hold the chain 
    saw firmly and not let go.  
    • The way the chain brake is activated, either manually 
    or automatically by the inertia release mechanism, 
    depends on the force of the kickback and the position 
    of the chain saw in relation to the object that the 
    kickback zone of the bar strikes.
    WARNING! Most chain saw accidents 
    happen when the chain touches the 
    operator. You must use approved 
    personal protective equipment whenever 
    you use the machine. Personal protective 
    equipment cannot eliminate the risk of 
    injury but it will reduce the degree of 
    injury if an accident does happen. Ask 
    your dealer for help in choosing the right 
    IMPORTANT! Sparks can come from the muffler, the bar 
    and chain or other sources. Always have fire 
    extinguishing tools available if you should need them. 
    Help prevent forest fires.
    WARNING! Never use a machine with 
    defective safety components. Safety 
    equipment must be inspected and 
    maintained. See instructions under the 
    heading Checking, maintaining and 
    servicing chain saw safety equipment. If 
    your machine does not pass all the 
    checks, take the saw to a servicing 
    dealer for repair. 
    All Husqvarna manuals Comments (0)

    Related Manuals for Husqvarna 135 X Torq Manual