Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-69
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
FF7 2: API (pg. 7-13)
Extension COS: API Event Reporting
(all CPCs) - Version 1.0 or higher
NOTE: This address is for future use.
Set whether extension events will be sent to the API port.
FF1 0 03 (00-15) 43 Hold (0 or 1) Hold
0=Disable API event reporting.
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Enable API event reporting. (default)
))/$ *(
Extension COS: Call Forward/Outside
(all CPCs) - Version 1.0 or higher
Allow or deny the ability to Call Forward incoming calls to an outside
phone number on extensions in this Class of Service (COS).
FF1 0 03 (00-15) 44 Hold (0 or 1) Hold
0=Allow Call Forward/Outside. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Deny Call Forward/Outside.
))A #-
FF1: System Programming Section 400-Programming
Page 1-70
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Notes:
Trunk-to-Trunk Transfer: Put outside call on hold; dial the second outside number; hang up. The two
outside calls will be connected.
Related Programming:
Extension COS: Onhook Transfer at Ringback (pg. 1-37) FF1 0 03 (00-15) 02 Hold (0 or 1) Hold
Extension COS: Onhook Transfer at Talk (pg. 1-38) FF1 0 03 (00-15) 03 Hold (0 or 1) Hold
Extension COS: Onhook Transfer at Camp-On (pg. 1-39) FF1 0 03 (00-15) 04 Hold (0 or 1) Hold
Trunk-to-Trunk Connection Timer (pg. 1-136) FF1 1 02 0013 Hold (0-255) Hold
Extension COS: Onhook Trunk-to-Trunk Transfer
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can perform
Trunk-to-Trunk Transfers.
FF1 0 03 (00-15) 45 Hold (0 or 1) Hold
0=Allow Trunk-to-Trunk Transfers.
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Trunk-to-Trunk Transfers.
))#) .3 %3!%3
(default)
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-71
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Station Park: Park a call at an individual extension by putting the call on hold and dialing a Call Park
code. The parked call can be retrieved on another extension (if enabled in the above address) by dialing
a Station Park Answer code and the extension number where the call is parked. Useful when the
intended recipient (usually the person who parked the call and needs to move around the office) isn’t
sure which extension they will be near when they are ready to retrieve the call.
Related Programming:
Station Call Park Recall Timer (pg. 1-153) FF1 1 04 0017 Hold (0-255) Hold
Extension COS: Station Call Park Answer
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can pick up a call in
Station Park. Does not apply to Call Parks to a Virtual Extension.
FF1 0 03 (00-15) 46 Hold (0 or 1) Hold
0=Allow Station Park Answer. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Deny Station Park Answer.
))@$4 /;
FF1: System Programming Section 400-Programming
Page 1-72
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Station Call Park Recall Timer (pg. 1-153) FF1 1 04 0017 Hold (0-255) Hold
Extension COS: Station Call Park Transfer
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can transfer a parked call
to another extension.
FF1 0 03 (00-15) 47 Hold (0 or 1) Hold
0=Allow Call Park Transfer. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Deny Call Park Transfer.
%
))@$4 %
Extension COS: OHVA
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can make an Off-Hook
Voice Announce (OHVA).
FF1 0 03 (00-15) 48 Hold (0 or 1) Hold
0=Allow OHVA. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Deny OHVA.
))#.&/
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-73
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Notes:
Related Programming:
Extension COS: OHVA Answer
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can answer an Off-Hook
Voice Announce (OHVA).
FF1 0 03 (00-15) 49 Hold (0 or 1) Hold
0=Allow OHVA Answer. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Deny OHVA Answer.
&
))#.&/ /;
FF1: System Programming Section 400-Programming
Page 1-74
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Extension COS: Call-Waiting Answer at HOLD
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) can answer a Call-Waiting
by pressing HOLD key.
FF1 0 03 (00-15) 50 Hold (0 or 1) Hold
0=Allow Call-Waiting Answer by HOLD.
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Call-Waiting Answer by
)),, A /)
HOLD. (default)
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-75
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1 0 04: Trunk COS Definitions
NOTE: The following Trunk Class of Service (COS) addresses apply to all
trunk types: analog CO trunks, E&M tie lines, T1-CO, T1-E&M, and T-point
ISDN.
When you enter the address number 00-15 for the desired COS No. 01-16, the
actual COS No. (01-16) will appear on the phone’s display.
By default, all trunks are assigned to Trunk COS No. 1 (see FF2 Trunk COS
Assignment addresses for each trunk type).
Table 1-3. Trunk COS addresses and defaults
Notes:
Intercom Ring Tone: Two short beeps, followed by 3 seconds of silence. Heard when direct calls are
ringing the phone; the “EXT” intercom LED (next to the FLASH key) will light.
FF1 0 04 (00-15) 01 Hold (0 or 1) Hold Trunk COS: Incoming Ring Tone Source 0 (use trunk’s
Ring Pattern)pg. 1-75
FF1 0 04 (00-15) 02 Hold (0 or 1) Hold Trunk COS: Dial Tone to Tie-Line 1 (Enabled) pg. 1-76
FF1 0 04 (00-15) 03 Hold (0 or 1) Hold Trunk COS: Fast-Busy Tone to Tie-Line 0 (Enabled) pg. 1-77
FF1 0 04 (00-15) 04 Hold (0 or 1) Hold Trunk COS: DID/DNIS Table 0 (“A” side) pg. 1-77
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold Trunk COS: Paging on DISA/Tie-Line Call 1 (Allowed) pg. 1-78
FF1 0 04 (00-15) 06 Hold (0 or 1) Hold Trunk COS: DISA ID Verification 0 (Verify) pg. 1-79
Trunk COS: Incoming Ring Tone Source
(all CPCs) - Version 1.0 or higher
Set ring tone source for incoming calls on trunks in this Class of Service.
EXCEPTION: This address does not apply to E&M tie-trunks (analog or T1).
FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
0=Use the trunk’s Ring Pattern setting
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 16
)) %!
for all incoming calls. (default)
1=Use intercom ring tone for all incoming
calls except for multiple-incoming
(which will use the Ring Pattern setting).
FF1: System Programming Section 400-Programming
Page 1-76
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
Ring Pattern for trunks ...
(pg. 2-13) for analog CO trunks FF2 0 BSSC 01 12 Hold (0-12) Hold
(pg. 2-63) for ISDN trunks FF2 1 BSSC 02 02 Hold (0-12) Hold
(pg. 2-93) for T1-CO trunks FF2 2 BSSCC 02 09 Hold (0-12) Hold
Notes:
Related Programming:
FF2 0: Analog Trunks (E&M Tie) (pg. 2-37)
FF2 2: T1 Trunks (E&M Tie) (pg. 2-116)
Trunk COS: Dial Tone to Tie-Line
(all CPCs) - Version 1.0 or higher
Set whether the system will send dial tone to a tie-line trunk in this Class of Service
for an incoming call (used in private networking).
FF1 0 04 (00-15) 02 Hold (0 or 1) Hold
0=Disable Dial Tone to tie-line.
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 161=Enable Dial Tone to tie-line. (default)
)) % #)% % *
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-77
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
FF2 0: Analog Trunks (E&M Tie) (pg. 2-37)
FF2 2: T1 Trunks (E&M Tie) (pg. 2-116)
Trunk COS: Fast-Busy Tone to Tie-Line
(all CPCs) - Version 1.0 or higher
Set whether the system will send fast-busy tone or disconnect the line
when errors (such as wrong dialing) occur on a tie-line trunk in this
Class of Service (COS).
FF1 0 04 (00-15) 03 Hold (0 or 1) Hold
0=Enable Fast-Busy Tone to tie-line.
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 16
1=Disable Fast-Busy Tone (line disconnected.)
))7% #)% % *
(default)
Trunk COS: DID/DNIS Table
(all CPCs) - Version 1.0 or higher
Set the DID/DNIS Table used for routing an incoming DID/DNIS call to the
appropriate extension(s) on trunks in this Class of Service (COS).
FF1 0 04 (00-15) 04 Hold (0 or 1) Hold
0=Use “A” side DID/DNIS Table. (default)
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 161=Use “B” side DID/DNIS Table. .
)) %75
FF1: System Programming Section 400-Programming
Page 1-78
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
There are two DID/DNIS tables available. This parameter determines which table to use for the related
COS. For instance, Table “A” could be used for DID, and Table “B” for DNIS.
Related Programming:
DID/DNIS Dial Table (“A” Side) (pg. 1-169) FF1 4 02 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
DID/DNIS Dial Table (“B” Side) (pg. 1-171) FF1 4 04 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
Notes:
Related Programming:
Splash Tone: Internal Paging (pg. 1-9) FF1 0 01 0002 Hold (0 or 1) Hold
Paging Answer on Tie-Line (pg. 1-29) FF1 0 02 0013 Hold (0 or 1) Hold
Paging Timer (Tie-Lines) (pg. 1-135) FF1 1 02 0012 Hold (0-255) Hold
Extension COS: Paging (pg. 1-48) FF1 0 03 (00-15) 15 Hold (0 or 1) Hold
FF2 0: Analog Trunks (E&M Tie) (pg. 2-37)
FF2 2: T1 Trunks (E&M Tie) (pg. 2-116)
Trunk COS: Paging on DISA/Tie-Line Call
(all CPCs) - Version 1.0 or higher
Set whether a DISA or E&M tie-line caller can page on trunks in this
Class of Service (COS).
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
0=Do not allow paging during DISA/tie-line
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 161=Allow paging during DISA/tie-line call.
))$ %
call. (default)