Home > Panasonic > Communications System > Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 664
    Add page 361 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-113
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
           
Notes:
Related Programming:
MOH Source for CO Trunks (pg. 1-96)     FF1 0 12 (0001-0072) Hold (0-3) Hold
        
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
Tenant Group Assignment
(all CPCs) - Version 1.0 or higher
Assign the T1 channel to a Tenant Group, which will apply when the T1 
channel originates an outbound call (such as DISA).
FF2   2   BSSCC    06   Hold   (1-72)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $
 	% 1!-6
Tenant Group No. --
with a CPC-96:
with a CPC-288:
with a CPC-576:
default:  0 [no assignment]Tenant Groups 01-12
Tenant Groups 01-36
Tenant Groups 01-72
TRS Class Assignment (Day)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) Class to the T1 channel, applicable during 
Day1 and Day2 modes when the trunk originates an outbound call (such as DISA).
FF2   2   BSSCC    07   0   Hold   (1-50)   Hold 
 
TRS Class No. 1-50 for Day ModeBSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
%
 	0 % 5
    Add page 362 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-114
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
         
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
          
Notes:
This 
Trunk COS 
Assignment controls the ring tone for incoming calls on this trunk - CO ring tone, 
intercom ring tone, or (for DIL trunks) a specific ring pattern.  The Trunk COS also controls various 
network settings.  See 
FF1 0 04: Trunk COS Definitions (pg. 1-75). 
Related Programming:
Trunk COS: Incoming Ring Tone Source (pg. 1-75)     FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
Trunk COS: DID/DNIS Table (pg. 1-77)     FF1 0 04 (00-15) 04 Hold (0 or 1) Hold
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)     FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
Trunk COS: DISA ID Verification (pg. 1-79)     FF1 0 04 (00-15) 06 Hold (0 or 1) Hold
TRS Class Assignment (Night)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) Class to the T1 channel, applicable 
during Night mode when the trunk originates an outbound call (such as DISA).
FF2   2   BSSCC    07   1   Hold   (1-50)   Hold 
 
TRS Class No. 1-50 for Night ModeBSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
% 	) 9  %  5
Trunk COS Assignment
(all CPCs) - Version 1.0 or higher
Assign a Trunk Class of Service (COS) number to the T1 channel.
FF2   2   BSSCC    08   Hold   (1-16)   Hold
 
 
Trunk Class of Service No. 1-16BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
 	%-4 #
    Add page 363 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-115
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Ring Pattern (pg. 2-93)     FF2 2 BSSCC 02 09 Hold (0-12) Hold
Day1/Day2/Night Ring Type/Destination (pg. 2-107)     FF2 2 BSSCC 04 (0 thru 5) ...
         
Notes:
Based on this setting, you can assign automatic volume adjustments for different connection types to 
this T1 channel (see FF1 8 02).
Related Programming:
Digital Pad Settings for Trunk Pad Class (pg. 1-178)     FF1 8 02 (0001-0480) Hold (0-31) Hold
Trunk Digital Pad Class Assignment
(all CPCs) - Version 1.0 or higher
Assign a Digital Pad Class to the T1 channel.
FF2   2   BSSCC    09   Hold   (1-16)   Hold
 
Trunk Digital Pad Class No. 1-16 .BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  7
  $
& 	%%-4 $/ 5
    Add page 364 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-116
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
2.  
FF2  2:  T1 Trunks (E&M Tie)  
NOTE:These settings apply to point-to-point network trunks (connections 
between 2 or more switches).  For “CO” T1 trunk programming, go to 
pg. 2-86.
          
Notes:
The remaining addresses in this 
T1 Trunks (E&M Tie) section will apply if the T1 trunk is set to 
2=Private Network in the above address.  If 
1=CO (default) is chosen instead, go to pg. 2-86.
Choose 
1=CO (and follow the addresses starting on pg. 2-86) if the carrier is providing DID/DNIS 
trunks with E&M signaling.
Related Programming:
Trunk Connection Type (CO/PBX) (pg. 2-127)     FF2 2 BSSCC 03 03 Hold (0 or 1) Hold
          
Trunk Connection Type (CO/Network)
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel is connected to the CO or to a private network.
FF2   2   BSSCC    00   Hold   (1-2)   Hold
 
 
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-241=CO  (default)
2=Private Network (E&M)
  $

 	%3 %6 #0)*%
Trunk Number Assignment
(all CPCs) - Version 1.0 or higher
Assign a trunk number to each T1 channel.
FF2   2   BSSCC   01   Hold   (0-576)   Hold
 
 
Trunk Number 1-576BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24default:  [no assignment](0 = no trunk)
  $
 	%-4 )-8
(or BLK-DOWN)
    Add page 365 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-117
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Press the BLK-DOWN soft key instead of the last HOLD in the above address, to scroll to the next 
BSSC trunk position and assign it a trunk number (stay in same address).
Before removing a Trunk Card from a Free Slot, you must first clear the Trunk Numbers (if assigned) 
from all of the Card’s BSSC ports in this address. See pg. 0-3 for more information.
The range of trunk numbers available for assignment depends on the CPC used:
with a CPC-96: Trunk Nos. 1-96
with a CPC-288: Trunk Nos. 1-288
with a CPC-576: Trunk Nos. 1-576
Related Programming:
Trunk Numbering (pg. 1-22)     FF1 0 02 0001 Hold (0 or 1) Hold
         
Notes:
Related Programming:
NOTE:  Settings 0-3 apply to T1 Trunks (CO).
See pg. 
2-86 for more information.
Trunk Signal Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s signaling type.
FF2   2   BSSCC    02   00   Hold   (0-5)   Hold
 
 
4=E&M/AC15  (Immediate Start) BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
5=E&M/AC15  (Wink Start)  (default)
  $


	
  , %6
    Add page 366 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-118
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
         
Notes:
Related Programming:
Trunk Signal Type (pg. 2-117)     FF2 2 BSSCC 02 00 Hold (0-5) Hold
Not Used
(all CPCs) - Version 1.0 or higher
FF2   2   BSSCC    02   01   Hold
FF2   2   BSSCC    02   02   Hold
FF2   2   BSSCC    02   03   Hold
 
 
   
   
  $

	)! B
  $

	)! B
  $

	)! B
Ring Detect Timer
(all CPCs) - Version 1.0 or higher
Set the amount of time allowed for the system to recognize an incoming call on 
a T1 channel set for 
Immediate Start signaling (see 
Trunk Signal Type).
FF2   2   BSSCC    02   04   Hold   (0 or 1)   Hold 
 
0=48 ms  (default)BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=160 ms
  $

	
*% %
    Add page 367 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-119
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
This address should be set to “1” (Enable) if the other system does not send back an answer signal, or if 
the trunk is used for paging calls.
Related Programming:
Auto Answer Timer (pg. 2-125)     FF2 2 BSSCC 02 15 Hold (0-3) Hold
          
Notes:
This setting is available only for Channel 01.
“SF” stands for SuperFrame (also known as D4), in which sampling frames are transmitted in groups of 
12.
“ESF” stands for Extended SuperFrame, in which sampling frames are transmitted in groups of 24.  ESF 
provides monitoring and maintenance capabilities that aren’t available with SF.
Auto Answer for Outbound Calls
(all CPCs) - Version 1.0 or higher
Set whether the system will automatically assume that an outgoing call on this T1 
channel has been answered by the other end, without waiting for an answer signal.
FF2   2   BSSCC    02   05   Hold   (0 or 1)   Hold 
 
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-240=Disable Auto Answer (default).
    Wait for answer signal from other end
1=Enable Auto Answer.  Open voice path
    without waiting for answer signal.    before opening voice path.
  $


	
/-!  /;
Frame Format
(all CPCs) - Version 1.0 or higher
Set the framing format ordered from the CO (assign to Channel #1).
FF2   2   BSSCC    02   06   Hold   (0 or 1)   Hold
 
 
0=SF  (default)BSSCC:  T1 (E&M Tie)
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 011=ESF
Channel Position (“01” only):
  $

	
 !
    Add page 368 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-120
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Both “SF” and “ESF” use robbed-bit signaling, in which the 8th bit is robbed from every 6th frame to 
transmit signaling states such as On-Hook and Off-Hook.
Related Programming:
Synchronized Clock (pg. 1-103)     FF1 0 18 (0001-0003) Hold (BSS/C) Hold
         
Notes:
This setting is available only for Channel 01.
“AMI” stands for Alternate Mark Inversion.
“B8ZS” stands for Binary 8-Zeros Suppression.
Related Programming:
Line Coding
(all CPCs) - Version 1.0 or higher
Set the clear-channel format ordered from the CO (assign to Channel #1).
FF2   2   BSSCC    02   07   Hold   (0 or 1)   Hold
 
 
0=AMI  (default)
1=B8ZS BSSCC:  T1 (E&M Tie)
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01 Channel Position (“01” only):
  $

%	
5 !
    Add page 369 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-121
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
          
Notes:
Related Programming:
Ring Frequency
(all CPCs) - Version 1.0 or higher
Set the ring frequency for incoming calls on the T1 channel.  Affects ringing 
pitch on digital phones.
FF2    2    BSSCC    02   08    Hold    (0-6)    Hold 
 
1=400/562 Hz  (default)
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
2=1000/1340 Hz
3=400 Hz
4=800/1040 Hz
5=1040/1320 Hz
6=660/1320 Hz 0=No Ring
  $

	 F-
    Add page 370 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-122
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
           
Notes:
Related Programming:
Ring Pattern
(all CPCs) - Version 1.0 or higher
(This setting does not apply to E&M tie-trunks.)
FF2   2   BSSCC    02   09   Hold   (0-12)   Hold    
Setting Values for U.K.Setting Values for U.S. and Hong Kong
0Synchronize with CO0Synchronize with CO
11on/2off (default)   (in seconds)11on/3off   (in seconds)  (default)
22on/1off22on/2off
31on/1off33on/1off
4.5on/.5off41on/1off
5.25on/2.75off5.5on/.5off
6.25on/.25off/.25on/2.25off6.5on/3.5off
7.25on/.25off/.25on/.25off/.25on/1.75off7.5on/.5off/.5on/2.5off
8.75on/.25off/.75on/1.25off8.25on/.25off/.25on/3.25off
91on/.25off/.25on/1.5off91on/.25off/.25on/2.5off
101on/.25off/.25on/.25off/.25on/1off101on/.25off/.25on/.25off/.25on/2off
111.375on/.125off/.125on/.125off/.125on/.125off111.375on/.125off/.125on/.125off/.125on/.125off
12Continuous tone12Continuous tone
 
 
 
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $

&	 , $%)
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Business System 576 Technical Manual Section 400 Programming