Home > Panasonic > Communications System > Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 664
    Add page 351 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-103
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Alarm Ringing:  Ringing frequency/interval changes for an incoming call that rings unanswered for 
longer than the Slide Ring/Alarm Ring Timer.
Alarm Ringing will not work while Slide Ringing or Delayed Ringing is occurring.
Related Programming:
Ring Alarm Frequency (pg. 1-106)     FF1 0 21 0001 Hold (0-6) Hold
Ring Alarm Pattern (pg. 1-107)     FF1 0 21 0002 Hold (0-12) Hold
Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132)     FF1 1 02 0007 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Day2) (pg. 1-133)     FF1 1 02 0008 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Night) (pg. 1-133)     FF1 1 02 0009 Hold (0-255) Hold
        
Notes:
Slide Ringing:  Applies to extensions that are Slide Ringing-enabled and have trunk FF-key 
assignments (where the trunk is also enabled for Slide Ringing in the above address).  An incoming call 
on the trunk will ring at the assigned extension or hunt group first (see Day1/2/Night Ring 
Assignments in FF2).  Then, after the Slide Ring/Alarm Ring Timer expires, the call will begin 
ringing at the extension(s) that have an FF-key for the trunk (see FF-Key Feature Assignment in FF4).
Related Programming:
Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132)     FF1 1 02 0007 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Day2) (pg. 1-133)     FF1 1 02 0008 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Night) (pg. 1-133)     FF1 1 02 0009 Hold (0-255) Hold
Slide Ringing Receive (pg. 3-9) (on individual extensions)     FF3 0 BSSC 04 02 Hold (0 or 1) Hold
Ring Type/Destination - Day1, Day2, Night (pg. 2-107)     FF2 2 BSSC 04 (0-5) Hold (0-6 or 0-9999) Hold
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)     FF4 0 BSSC 0 (01-32) Hold FLASH 
(Code) Hold
Slide Ringing
(all CPCs) - Version 1.0 or higher
Enable/Disable Slide Ringing for incoming calls on this T1 channel that ring 
unanswered for longer than the Slide Ring/Alarm Ring Timer.
FF2   2   BSSCC    03   12   Hold   (0 or 1)   Hold 
 
0=Disable Slide Ringing.  (default)BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=Enable Slide Ringing.
  $
	
, 
    Add page 352 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-104
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
Call Duration Timer (analog CO) (pg. 1-118)     FF1 1 01 0005 Hold (1-255) Hold
DTMF/Dial Pulse Dialing (pg. 2-97)     FF2 2 BSSCC 03 00 Hold (0 or 1) Hold
        
Notes:
Related Programming:
DTMF/Dial Pulse Dialing (pg. 2-97)     FF2 2 BSSCC 03 00 Hold (0 or 1) Hold
DTMF Conversion (Outbound Calls)
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel will switch from dial-pulse to DTMF signaling after 
the called party answers an outbound call, according to the 
Call Duration Timer.
FF2   2   BSSCC    03   13   Hold   (0 or 1)   Hold 
 
0=Do not switch to DTMF signaling. BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=Switch to DTMF signaling after the 
     called (outside) party answers.  (default)
  $
	$7 !(0#-
DTMF Conversion (Inbound Calls)
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel will switch from dial-pulse to DTMF signaling 
after the extension user answers an incoming call.
FF2   2   BSSCC    03   14   Hold   (0 or 1)   Hold 
 
0=Do not switch to DTMF signaling.BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=Switch to DTMF signaling after the
    phone user answers.  (default)
  $
	$7 !(0
    Add page 353 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-105
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Indirect LCR:  System will send a pre-assigned code (set in the ARS Dial Conversion Tables) when an 
extension seizes the trunk to make an outgoing call.  This feature is used in the U.K. for sending a 
system identification PIN number to the CO.
U.S.A.:  Do not enable this address for MCO access code routing (eg., dialing “9” to get an outside line).  
Instead, use ARS tables (see FF6) so the system can distinguish intercom calls from outgoing calls.
Related Programming:
FF6 2 05: Digit Modify Table (pg. 6-38)
         
Notes:
This address should be set to “0” (
Do not use system timer) if the CO sends back reverse signaling for 
called-party answer (typical in the U.K.).
Indirect LCR
(all CPCs) - Version 1.0 or higher
(U.K. use only) Enable/Disable the Indirect Least Cost Routing (LCR) function.
FF2   2   BSSCC    03   15   Hold    (0 or 1)   Hold
 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-240=Disable Indirect LCR.  (default)
1=Enable Indirect LCR.
  $

	
 5
Call Duration
(all CPCs) - Version 1.0 or higher
Set whether the system will use the 
Call Duration Timer to begin tracking call duration 
(both on LCD display and in SMDR records) for an outgoing call on this trunk.
FF2   2   BSSCC    03   16   Hold   (0 or 1)   Hold 
0=Do not use system timer to 
    start call duration.
1=Use system timer to start
    
call duration.  (default)
  $
	,, -!
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
    Add page 354 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-106
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
Call Duration Timer (analog CO) (pg. 1-118)     FF1 1 01 0005 Hold (1-255) Hold
      
Not Used
(all CPCs) - Version 1.0 or higher
FF2   2   BSSCC    03   17   Hold
FF2   2   BSSCC    03   18   Hold
 
 
  $
%	)! B
  $
	)! B
    Add page 355 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-107
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
                
      
Notes:
Multiple Incoming:  An incoming call on this trunk can ring on multiple extensions that have a CO or 
MCO FF-key line appearance for the trunk (see 
Trunk FF-Key addresses in FF4).
Ring destinations for 
DID/DNIS trunks are assigned in 
DID Tables (FF1 4 02 and 04).  
DISA trunks do 
not require a ring destination assignment; the DISA caller dials the desired extension after entering the 
phone system.
To set up Virtual Port Ringing:  Choose “3=DIL to Extension” and enter the Virtual Port Extension 
No. (
not the port no.) in the above addresses. Extension Numbers are assigned to Virtual Ports in FF3 2 
(001-576) 00 Hold (0-9999) Hold (pg. 3-40).
Day1 Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s ringing type for incoming calls during Day1 mode.
FF2   2   BSSCC    04   0   Hold   (0-6)   Hold
 
 
0=Multiple Incoming  (default)BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
  $

	 
  %6
Day1 Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group for a “DIL” (Direct In-Line) setting in the above address.
FF2   2   BSSCC    04   1   Hold   (0-9999)   Hold 
 
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $
 	 !
(if “3=DIL to Extension”)
default:  [no assignment]
(if “4=DIL to Hunt Group”)
(if “5=DIL to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “6=DIL to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No. Destination Number:
    Add page 356 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-108
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
DID/DNIS Dial Table (“A” Side) (pg. 1-169)     FF1 4 02 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
DID/DNIS Dial Table (“B” Side) (pg. 1-171)     FF1 4 04 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
Extension Number Assignment (pg. 3-4) for digital keyphones/SLTs     FF3 0 BSSC 02 Hold (0-9999) Hold
Extension Number Assignment (pg. 3-29) for S-point ISDN extensions     FF3 1 BSSC 01 Hold (0-9999) Hold
Extension Number Assignment (pg. 3-40)     FF3 2 (001-576) 00 Hold (0-9999) Hold
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)    FF4 0 BSSC 0 (01-32) Hold FLASH 
(Code) Hold
FF-Key Feature Assignment (DSS/72) (pg. 4-14)    FF4 1 BSSC 0 (01-72) Hold FLASH (Code) Hold
Attendant HG Pilot Number (pg. 5-3)     FF5 0 01 Hold (0-9999) Hold
FF5 1: Extension Hunt Groups (pg. 5-13)
Closed Number Table: Digit String (pg. 6-42)     FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold
SSD Numbers (pg. 8-46)     FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
      
        
Day2 Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s ringing type for incoming calls during Day2 mode.
FF2   2   BSSCC    04   2   Hold   (0-6)   Hold
 
 
0=Multiple Incoming  (default)BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
  $
 	
  %6
Day2 Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group for a “DIL” (Direct In-Line) setting in the above address).
FF2   2   BSSCC    04   3   Hold   (0-9999)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $
 	 !
(if “3=DIL to Extension”)
default:  [no assignment]
(if “4=DIL to Hunt Group”)
(if “5=DIL to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “6=DIL to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No. Destination Number:
    Add page 357 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-109
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:    (see “Day1 Ring Type/Destination” - pg. 2-107)
Related Programming:    (see “Day1 Ring Type/Destination” - pg. 2-107)
          
             
Notes:    (see “Day1 Ring Type/Destination” - pg. 2-107)
Related Programming:    (see “Day1 Ring Type/Destination” - pg. 2-107)
Night Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s ringing type for incoming calls during Night mode.
FF2   2   BSSCC    04   4   Hold   (0-6)   Hold
 
 
0=Multiple Incoming  (default) BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
  $
 	
)9  %6
Night Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group for a “DIL” (Direct In-Line) setting in the above address.
FF2   2   BSSCC    04   5   Hold   (0-9999)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $

 	) !
(if “3=DIL to Extension”)
default:  [no assignment]
(if “4=DIL to Hunt Group”)
(if “5=DIL to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “6=DIL to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No. Destination Number:
    Add page 358 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-110
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
             
      
Notes:
Delayed ringing for DID trunks is set in the 
DID Tables (FF1 4).
Related Programming:
Day1 Ring Type (pg. 2-107)     FF2 2 BSSCC 04 0 Hold (0-6) Hold
Extension Number Assignment (pg. 3-4) on digital keyphones/SLTs     FF3 0 BSSC 02 Hold (0-9999) Hold
Extension Number Assignment (pg. 3-29) on S-point ISDN extensions     FF3 1 BSSC 01 Hold (0-9999) Hold
Extension Number Assignment (pg. 3-40)     FF3 2 (001-576) 00 Hold (0-9999) Hold
Attendant HG Pilot Number (pg. 5-3)     FF5 0 01 Hold (0-9999) Hold
FF5 1: Extension Hunt Groups (pg. 5-13)
Closed Number Table: Digit String (pg. 6-42)     FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold
SSD Numbers (pg. 8-46)     FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
Day1 Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s delayed-ringing type during Day1 mode.
NOTE:  
Day1 Ring Type (pg. 2-107) must be either “DIL” or “Multiple 
Incoming” to set Day1 Delayed Ringing (DID and DISA do not apply here).
FF2   2   BSSCC    05   0   Hold   (0-4)   Hold 
 
0=Disabled; no delayed ringing  (default)BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
  $

 	
 	 %6
Day1 Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group, depending on the setting in the above address.
FF2   2   BSSCC    05   1   Hold   (0-9999)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $

 	 	!
Destination Number:
(if “1=delay-ring to Extension”)
default:  [no assignment]
(if “2=delay-ring to Hunt Group”)
(if “3=delay-ring to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “4=delay-ring to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
    Add page 359 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 CO)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-111
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
CO Delayed Ring Timer ...
       Day1 unanswered calls (pg. 1-129)     FF1 1 02 0003 Hold (0-255) Hold
       Day2 unanswered calls (pg. 1-129)     FF1 1 02 0004 Hold (0-255) Hold
       Night unanswered calls (pg. 1-130)     FF1 1 02 0005 Hold (0-255) Hold
       Busy (pg. 1-131)     FF1 1 02 0006 Hold (0-255) Hold
      
      
Notes:    (see “Day1 Delayed Ring Type/Destination” - pg. 2-110)
Related Programming:    (see “Day1 Delayed Ring Type/Destination” - pg. 2-110)
Day2 Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s delayed-ringing type during Day2 mode.
NOTE:  
Day2 Ring Type (pg. 2-108) must be either “DIL” or “Multiple 
Incoming” to set Day2 Delayed Ringing (DID and DISA do not apply here).
FF2   2   BSSCC    05   2   Hold   (0-4)   Hold 
 
0=Disabled; no delayed ringing  (default) BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
  $

 	
 	 %6
Day2 Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group, depending on the setting in the above address.
FF2   2   BSSCC    05   3   Hold   (0-9999)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $

 	 	!
Destination Number:
(if “1=delay-ring to Extension”)
default:  [no assignment]
(if “2=delay-ring to Hunt Group”)
(if “3=delay-ring to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “4=delay-ring to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
    Add page 360 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 CO) Section 400-Programming
Page 2-112
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
              
Notes:    (see “Day1 Delayed Ring Type/Destination” - pg. 2-110)
Related Programming:    (see “Day1 Delayed Ring Type/Destination” - pg. 2-110)
Night Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel’s delayed-ringing type during Night mode.
NOTE:  
Night Ring Type (pg. 2-109) must be either “DIL” or “Multiple 
Incoming” to set Night Delayed Ringing (DID and DISA do not apply here).
FF2   2   BSSCC    05   4   Hold   (0-4)   Hold 
 
0=Disabled; no delayed ringing  (default)BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
  $

 	
)1% 	 %6
Night Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt 
Group, depending on the setting in the above address.
FF2   2   BSSCC    05   5   Hold   (0-9999)   Hold 
 
BSSCC:  T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $


 	) 	!
Destination Number:
(if “1=delay-ring to Extension”)
default:  [no assignment]
(if “2=delay-ring to Hunt Group”)
(if “3=delay-ring to SSD”)
Ext.No., Virtual Ext.No., or Closed No.
(if “4=delay-ring to Attendant”)
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Business System 576 Technical Manual Section 400 Programming