Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming FF2: Trunk Programming (Analog E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-53
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
FF6 2 05: Digit Modify Table (pg. 6-38)
Notes:
Related Programming:
FF6 2 08: Tandem Exchange Table (pg. 6-45)
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 02 18 Hold
FF2 0 BSSC 02 19 Hold
FF2 0 BSSC 02 20 Hold
$
)! B
$
& )! B
$
)! B
Day1 Ring Type
(all CPCs) - Version 1.0 or higher
Set ring type for incoming calls on the E&M tie trunk during Day1 mode.
FF2 0 BSSC 03 0 Hold (0 or 1) Hold
0=Tie Incoming. (default) Check digits andBSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
ring the extension or paging.
1=Tandem. Check digits based on Tandem Table.
$
%6
FF2: Trunk Programming (Analog E&M Tie) Section 400-Programming
Page 2-54
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
FF6 2 08: Tandem Exchange Table (pg. 6-45)
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 03 1 Hold $
)! B
Day2 Ring Type
(all CPCs) - Version 1.0 or higher
Set ring type for incoming calls on the E&M tie trunk during Day2 mode.
FF2 0 BSSC 03 2 Hold (0 or 1) Hold
0=Tie Incoming. (default) Check digitsBSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
and ring the extension or paging.
1=Tandem. Check digits based on Tandem Table.
$
%6
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 03 3 Hold
$
)! B
Section 400-Programming FF2: Trunk Programming (Analog E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-55
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
FF6 2 08: Tandem Exchange Table (pg. 6-45)
Night Ring Type
(all CPCs) - Version 1.0 or higher
Set ring type for incoming calls on the E&M tie trunk during Night mode.
FF2 0 BSSC 03 4 Hold (0 or 1) Hold
0=Tie Incoming. (default) Check digits andBSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
ring the extension or paging.
1=Tandem. Check digits based on Tandem Table.
$
)9 %6
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 03 5 Hold
$
)! B
FF2: Trunk Programming (Analog E&M Tie) Section 400-Programming
Page 2-56
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
MOH Source for Tie-Lines (pg. 1-97) FF1 0 13 (0001-0072) Hold (0-3) Hold
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 04 0 Hold
FF2 0 BSSC 04 1 Hold
FF2 0 BSSC 04 2 Hold
FF2 0 BSSC 04 3 Hold
FF2 0 BSSC 04 4 Hold
FF2 0 BSSC 04 5 Hold
$
)! B
$
)! B
$
)! B
$
)! B
$
)! B
$
)! B
Tenant Group Assignment
(all CPCs) - Version 1.0 or higher
Assign the E&M tie trunk to a Tenant Group, which will apply when the trunk
originates an outbound call (such as DISA).
FF2 0 BSSC 05 Hold (0-72) Hold
BSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
$
% 1!-6
Tenant Group No. --
with a CPC-96:
with a CPC-288:
with a CPC-576:
default: 0 [no assignment]Tenant Groups 01-12
Tenant Groups 01-36
Tenant Groups 01-72
Section 400-Programming FF2: Trunk Programming (Analog E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-57
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
TRS Class Assignment (Day)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) class to the E&M tie trunk, applicable
during Day1 and Day2 modes when the trunk is the originator of an outbound
call (such as DISA).
FF2 0 BSSC 06 0 Hold (1-50) Hold
TRS Class No. 1-50 for Day ModeBSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
default: 1
$
0 % 5
TRS Class Assignment (Night)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) class to the E&M tie trunk, applicable during
Night mode when the trunk is the originator of an outbound call (such as DISA).
FF2 0 BSSC 06 1 Hold (1-50) Hold
TRS Class No. 1-50 for Night ModeBSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
default: 1
$
)9 % 5
FF2: Trunk Programming (Analog E&M Tie) Section 400-Programming
Page 2-58
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
This
Trunk COS
Assignment controls the ring tone for incoming calls on this trunk - intercom ring
tone (2 short beeps followed by 3 seconds of silence), or a specific ring pattern. The Trunk COS also
controls various tie-line network settings. See
FF1 0 04: Trunk COS Definitions (pg. 1-75).
Related Programming:
Trunk COS: Incoming Ring Tone Source (pg. 1-75) FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
Trunk COS: Dial Tone to Tie-Line (pg. 1-76) FF1 0 04 (00-15) 02 Hold (0 or 1) Hold
Trunk COS: Fast-Busy Tone to Tie-Line (pg. 1-77) FF1 0 04 (00-15) 03 Hold (0 or 1) Hold
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78) FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
Ring Pattern (pg. 2-42) FF2 0 BSSC 01 12 Hold (0-12) Hold
Notes:
Based on this setting, you can assign automatic volume adjustments for different connection types to
this trunk (see FF1 8 02).
Related Programming:
Digital Pad Settings for Trunk Pad Class (pg. 1-178) FF1 8 02 (0001-0480) Hold (0-31) Hold
Trunk COS Assignment
(all CPCs) - Version 1.0 or higher
Assign a Trunk Class of Service (COS) to the E&M tie trunk.
FF2 0 BSSC 07 Hold (1-16) Hold
Trunk Class of Service No. 1-16 BSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
default: 1
$
% %-4 #
Trunk Digital Pad Class Assignment
(all CPCs) - Version 1.0 or higher
Assign a Digital Pad Class to the E&M tie trunk.
FF2 0 BSSC 08 Hold (1-16) Hold
Trunk Digital Pad Class No. 1-16BSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
default: 8
$
%-4 $/ 5
Section 400-Programming FF2: Trunk Programming (ISDN)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-59
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
2.
FF2 1: ISDN Trunks
Notes:
Skip this address if using only the 23B+D card for PRI, or only one 2B+D card for BRI.
Related Programming:
Synchronized Clock (pg. 1-103) FF1 0 18 (0001-0003) Hold (BSS/C) Hold
D-Channel Position
(all CPCs) - Version 1.0 or higher
If using a common D-Channel, identify the PRI ISDN trunk(s) it will control on the
PRI card (24B). Applicable only if the system is using multiple PRI or BRI cards.
FF2 1 BSSC 00 0 Hold (BSSC) Hold
Common D-Channel Position:BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=PRI Circuit no. 1B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
default: [no assignment]
$
9 9$#
D-Channel Interface ID Code
(all CPCs) - Version 1.0 or higher
If using a common D-channel, identify the Interface ID code (supplied by the CO)
that will be used for common D-channel control.
FF2 1 BSSC 00 1 Hold (1-127) Hold
Interface ID Code (max. 3 digits)BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=PRI Circuit no. 1default: [no assignment]
$
9 0 !
FF2: Trunk Programming (ISDN) Section 400-Programming
Page 2-60
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
The D-Channel Position (see above address) must be entered before the D-Channel Interface ID
Code can be set. If the D-Channel Position is cleared, the Interface ID Code will be automatically
cleared as well.
Related Programming:
Notes:
2B+D (BRI) card: Supports up to 2 trunks.
23B+D (PRI) card: Supports up to 23 trunks (minimum 8).
24B (PRI) card: Supports up to 24 trunks (minimum 8).
Related Programming:
Trunk Numbering (pg. 1-22) FF1 0 02 0001 Hold (0 or 1) Hold
Trunk Number Assignment (1st Channel)
(all CPCs) - Version 1.0 or higher
Enter the trunk number for the first ISDN channel only. The system will
automatically assign sequential trunk numbers to the remaining channels on the card.
FF2 1 BSSC 01 Hold (0-576) Hold
Trunk No. (max. 3 digits)BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)default: [no assignment]
$
%-4 )-8
Section 400-Programming FF2: Trunk Programming (ISDN)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-61
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Figure 2-1: BRI Point-to-Multi-Point connection
Trunk Connection Type (Pt-to-Pt/MultiPt)
(all CPCs) - Version 1.0 or higher
Set the ISDN trunk for Point-to-Point connection (for either BRI or PRI), or
Point-to-MultiPoint (BRI only).
FF2 1 BSSC 02 00 Hold (0 or 1) Hold
0=Point-to-Point (default)BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)1=Point-to-Multi-Point (BRI only)
$
!! %6
BRI Terminals - Fax Machines, etc.
AB
C
BRI Card
PBX
PSTN
(max. 8, in U.S.)
CSU
or
DSU
FF2: Trunk Programming (ISDN) Section 400-Programming
Page 2-62
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Ring Frequency
(all CPCs) - Version 1.0 or higher
Set the ring frequency for the ISDN trunk. Affects ringing pitch on digital phones only.
FF2 1 BSSC 02 01 Hold (0-6) Hold
1=400/562 Hz (default)
2=1000/1340 Hz
3=400 Hz
4=800/1040 Hz
5=1040/1320 Hz
6=660/1320 Hz0=No Ring BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
$
F-