Panasonic Digital Business System 576 Technical Manual Section 400 Programming

							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-5
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
DSS/72 consoles and EM/24 units require their own port, separate from the phone.  To match them to a 
phone, assign the same Extension Number to both ports.
Multiple DSS/72 consoles can be assigned to the same keyphone.  (EM/24 units are limited to 1 per 
phone.)
rThere is no limit on how many EM/24s can be assigned to a phone, other than the number of ports 
available in the system.
rDSS/72 assignment is limited by the CPC used:
with a CPC-96: max. 12 DSS/72 consoles
with a CPC-288: max. 36 DSS/72 consoles
with a CPC-576: max. 72 DSS/72 consoles
To view Extension Port/Number assignments in normal operating mode, you must first program an FF-
key with the Extension Port Confirm feature code, *59. See FF4 addresses starting on pg. 4-7 for 
programming instructions.
Related Programming:
Phone Type (pg. 3-3)     FF3 0 BSSC 00 Hold (1-3) Hold
         
Notes:
Set this address to “0” (Detect SLT hookflash) to be able to transfer or make conference calls.  Set it to 
“1” (Ignore SLT hookflash) to avoid unexpected call holding.
Related Programming:
SLT On-Hook Detection Timer (pg. 3-6)     FF3 0 BSSC 03 2 Hold (0-3) Hold
SLT Hookflash Timer (pg. 3-7)     FF3 0 BSSC 03 3 Hold (0-3) Hold
Extension COS: Brokers Hold on SLTs (pg. 1-42)     FF1 0 03 (00-15) 07 Hold (0 or 1) Hold
Extension COS: Hookflash Control on SLTs (pg. 1-43)     FF1 0 03 (00-15) 08 Hold (0 or 1) Hold
SLT Hookflash
(all CPCs) - Version 1.0 or higher
Set whether the system will recognize a hookflash on an SLT phone as placing 
the call on hold.
FF3   0   BSSC   03   0   Hold   (0 or 1)   Hold 
0=Detect SLT hookflash.  (default)BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-81=Ignore SLT hookflash.
  $

 	
5% .3 !!, 
						

							FF3: Extension Programming Section 400-Programming
Page 3-6
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
        
Notes:
If the hookswitch is held down for less than this timer, but longer than the 
SLT Hookflash Timer (see 
next address), the system will recognize it as a hookflash.
Related Programming:
SLT Hookflash (pg. 3-5)      FF3 0 BSSC 03 0 Hold (0 or 1) Hold
SLT Hookflash Timer (pg. 3-7)      FF3 0 BSSC 03 3 Hold (0-3) Hold
SLT Dial Type
(all CPCs) - Version 1.0 or higher
Set signaling for dialing on SLT phones.
FF3   0   BSSC   03   1    Hold    (0 or 1)   Hold
 
0=Dial pulseBSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-81=DTMF  (default)
  $
 	5% %6 $0$7
SLT On-Hook Detection Timer
(all CPCs) - Version 1.0 or higher
Set minimum on-hook time (how long hookswitch must be held down) before 
the system disconnects the call.  This setting value depends on 
SLT Hookflash 
setting (“Detect” or “Ignore”).
FF3   0   BSSC   03   2    Hold   (0-3)   Hold 
Flash Detect      Flash IgnoreBSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80
1
2
3240 ms
1008 ms
1200 ms
1504 ms160 ms (default (U.K.)
112 ms (default U.S.)
208 ms
304 ms
  $
 	5% #)	.3 % 
						

							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-7
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
If the hookswitch is held down for less than this timer, system will ignore the hookflash.
If the hookswitch is held down for longer than this timer, but shorter than the 
SLT On-Hook Detection 
Timer (see previous address), system will recognize it as a hookflash.
Related Programming:
SLT Hookflash (pg. 3-5)      FF3 0 BSSC 03 0 Hold (0 or 1) Hold
SLT On-Hook Detection Timer (pg. 3-6)      FF3 0 BSSC 03 2 Hold (0-3) Hold
      
SLT Hookflash Timer
(all CPCs) - Version 1.0 or higher
Set minimum on-hook time (how long hookswitch must be held down) before 
the system recognizes it as a hookflash.
FF3   0   BSSC   03   3   Hold   (0-3)   Hold 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=80-176 ms (default - U.K.)
1=96-176 ms
2=208 ms  (default - U.S.)
3=208 ms
  $
 	5% .!!4 %2
Not Used
(all CPCs) - Version 1.0 or higher
FF3   0   BSSC   03   4    Hold  $
 	)! B 
						

							FF3: Extension Programming Section 400-Programming
Page 3-8
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
        
Notes:
Related Programming:
Auto Answer (Handset)
(all CPCs) - Version 1.0 or higher
Set whether a trunk key must be pressed to answer an incoming call, or whether 
the call can be answered by simply picking up the handset.
FF3   0   BSSC   04   00   Hold    (0 or 1)   Hold 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Pick up handset AND press trunk key.
1=Pick up handset only.  (default)
  $


	/-! /;
Ringing Line Preference (ON/OFF)
(all CPCs) - Version 1.0 or higher
Set whether the trunk key must be pressed to answer an incoming call, or if the 
call can be answered by pressing ON/OFF.
FF3   0   BSSC   04   01   Hold    (0 or 1)   Hold 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Must press trunk key to pick up call.  (default)
1=Pressing ON/OFF picks up call.
  $

	
 $* #)0# 
						

							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-9
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Slide Ringing:   An unanswered trunk call begins ringing on other extensions with a line appearance for 
that trunk.  Equivalent to Delayed Ringing on an MCO key.
Related Programming:
Slide Ringing (pg. 2-25) on analog CO trunks     FF2 0 BSSC 02 14 Hold (0 or 1) Hold
Slide Ringing (pg. 2-69) on ISDN trunks     FF2 1 BSSC 03 07 Hold (0 or 1) Hold
Slide Ringing (pg. 2-103) on T1 CO trunks     FF2 2 BSSCC 03 12 Hold (0 or 1) Hold
Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132)     FF1 1 02 0007 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Day2) (pg. 1-133)     FF1 1 02 0008 Hold (0-255) Hold
Slide Ring/Alarm Ring Timer (Night) (pg. 1-133)     FF1 1 02 0009 Hold (0-255) Hold
        
Notes:
The extension must have a direct CO line appearance (MCO line appearance won’t work).
Related Programming:
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)     FF4 0 BSSC 0 (01-32) Hold FLASH 
(Code) Hold
Slide Ringing Receive
(all CPCs) - Version 1.0 or higher
Enable/Disable the extension for receiving a Slide Ringing call.
FF3   0   BSSC   04   02   Hold    (0 or 1)   Hold
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not allow Slide Ringing receive.  (default)
1=Allow Slide Ringing receive.
  $

	
, 
Busy Override on Trunk Key
(all CPCs) - Version 1.0 or higher
Enable/Disable the extension’s ability to barge into a trunk call by pressing the 
trunk key.
FF3   0   BSSC   04   03   Hold    (0 or 1)   Hold 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not allow Busy Override on trunk
    key.  (default)
1=Allow Busy Override on trunk key.
  $

	
#	3 #( 
						

							FF3: Extension Programming Section 400-Programming
Page 3-10
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
Extension COS: Manual Camp-On Send (pg. 1-57)     FF1 0 03 (00-15) 28 Hold (0 or 1) Hold
Extension COS: Manual Camp-On Receive (pg. 1-58)     FF1 0 03 (00-15) 29 Hold (0 or 1) Hold
        
Notes:
Digital key phones indicate a second multiple-incoming call with a “beep” on speaker.  SLT phones 
“beep” in receiver.
Multiple Incoming:  An incoming trunk call can ring on multiple extensions that have an FF-key line 
appearance for the trunk (see 
Trunk FF-Key addresses in FF4).
The destination extensions for receiving 
Multiple Incoming trunks are assigned in FF4.
Auto Camp-On Receive
(all CPCs) - Version 1.0 or higher
Enable/Disable the ability of other extensions to automatically “camp” onto 
this (busy) extension simply by calling it.
FF3   0   BSSC   04   04   Hold    (0 or 1)   Hold 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not allow Auto Camp-On Receive.
1=Allow Auto Camp-On Receive.
  $

	
/-! 6	#
    (default)
CO Off-Hook Signal
(all CPCs) - Version 1.0 or higher
Set whether the extension phone will indicate a second multiple-incoming call 
while the first call is ringing on the trunk key.
FF3   0   BSSC   04   05   Hold    (0 or 1)   Hold 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not ring for another multiple-
    incoming call.
1=Ring for another multiple-incoming
    call.  (default)
  $


	#  	.!!4 , 
						

							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-11
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
Trunk FF-Key ...
       Outbound Call Restriction (pg. 4-10)     FF4 0 BSSC 1 (01-32) Hold CONF (0 or 1) Hold
       Inbound Answer Restriction (pg. 4-11)     FF4 0 BSSC 1 (01-32) Hold CONF Hold (0 or 1) Hold
       Day1 Ringing (pg. 4-11)     FF4 0 BSSC 1 (01-32) Hold CONF Holdx2 (0 or 1) Hold
       Day2 Ringing (pg. 4-12)     FF4 0 BSSC 1 (01-32) Hold CONF Holdx3 (0 or 1) Hold
       Night Ringing (pg. 4-12)     FF4 0 BSSC 1 (01-32) Hold CONF Holdx4 (0 or 1) Hold
       No-Ring Auto Answer (pg. 4-13)     FF4 0 BSSC 1 (01-32) Hold CONF Holdx5 (0 or 1) Hold
        
Notes:
Related Programming:
Loop (AEC) Disconnect Signal for VM (pg. 3-19)     FF3 0 BSSC 04 20 Hold (0 or 1) Hold
Extension COS Assignment (pg. 3-26)     FF3 0 BSSC 07 Hold (1-16) Hold
FF1 0 23 and 24: Voice Mail Codes (pg. 1-109)
Call-Forward ID Codes for Voice Mail (pg. 8-51)     FF8 1 05 Hold Hold (Ext.No.) Hold FLASH (up to 16 char.) 
Hold
Extension COS: Priority Message Waiting Send (VM) (pg. 1-54)     FF1 0 03 (00-15) 24 Hold (0 or 1) Hold
SLT Voice Mail Connection
(all CPCs) - Version 1.0 or higher
Set whether an SLT extension is connected to 3rd-Party Voice Mail.
FF3   0   BSSC   04   06   Hold   (0 or 1)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=This SLT extension is not a voice mail
1=This SLT extension 
is a voice mail port.     port.  (default)
  $

	
&!2, $! 
						

							FF3: Extension Programming Section 400-Programming
Page 3-12
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
       
Notes:
This address must be set to “1” (Receive DTMF) if the SLT port is Voice Mail, answering machine, etc. 
(a device requiring DTMF).
Related Programming:
SLT Fixed Ring Pattern
(all CPCs) - Version 1.0 or higher
Set whether an SLT’s receiving ring pattern is fixed (same pattern always) or 
differs based on the call type (recall, intercom, trunk, etc.).
FF3   0   BSSC   04   07   Hold    (0 or 1)   Hold 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Different ring patterns for receiving
1=Fixed ring pattern for receiving all call types    different call types.  (default)
    (1 second on / 3 seconds off).
  $

%	
+ 	5%
End-to-End Signaling
(all CPCs) - Version 1.0 or higher
Set whether an SLT extension port will receive DTMF signals from a digital 
keyphone port.
FF3   0   BSSC   04   08   Hold    (0 or 1)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not receive DTMF from digital key phone.
1=Receive DTMF from digital key phone.  (default)
  $

	/-! $7 !( 
						

							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-13
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
         
Notes:
Even if this is set to “Disable,” the phone’s LCD display will indicate the Message-Waiting.
(all CPCs - Version 1.3 and higher)   Message-Waiting can now be sent during a Voice call without first 
having to switch to Tone calling.
Related Programming:
Extension COS: Message Waiting Send (pg. 1-55)     FF1 0 03 (00-15) 25 Hold (0 or 1) Hold
         
Notes:
Set this address to “1” (Do not allow intterruptions) to protect data transmissions from being 
interrupted.
Related Programming:
Message Waiting LED
(all CPCs) - Version 1.0 or higher
Enable/Disable Message Waiting LED on the extension for messages received 
from other extensions.
FF3   0   BSSC   04   09   Hold    (0 or 1)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Disable Message Waiting LED.
1=Enable Message Waiting LED.  (default)
  $

&	2A 5* !!,
Data Security
(all CPCs) - Version 1.0 or higher
Enable/Disable interruptions such as Busy Override-Receive on this extension.
FF3   0   BSSC   04   10   Hold    (0 or 1)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Allow interruptions on this extension.
    (default)
1=Do not allow interruptions.
  $

	
 - 
						

							FF3: Extension Programming Section 400-Programming
Page 3-14
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
This address applies only to handset off-hook calls (doesn’t apply to ON/OFF key).
If “0” (do not allow return to “Idle” menu) is selected, the first page of the directory accessed will 
appear when the user hangs up.
If “1” (allow return to “Idle” menu) is selected, the phone will return to the Fixed Idle menu each time 
the user hangs up.  To select a different menu for idle, display the desired menu during idle, then press:
    
ON/OFF   PROG   ##   ON/OFF  
Related Programming:
        
Notes:
The incoming call can be an intercom call, DID, DISA, DIL, etc.
Large-LCD Fixed Menu Display During Idle
(all CPCs) - Version 1.0 or higher
Set whether a Large-LCD phone’s display will return to the “Idle” Fixed 
Feature Code menu screen when the phone returns to idle.
FF3   0   BSSC   04   11   Hold    (0 or 1)   Hold
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Do not allow return to “Idle” Fixed menu. 
1=Allow return to “Idle” Fixed menu.  (default)
  $
	,  
Trunk Key Operation:  Direct Calls
(all CPCs) - Version 1.0 or higher
Enable/Disable the extension’s ability to seize a trunk by pressing the trunk key 
for it while the phone is ringing for an incoming call.
FF3   0   BSSC   04   12   Hold    (0 or 1)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Seize trunk.
1=Ignore key press.  (default)
  $
	# 3 #$%