Panasonic Digital Business System 576 Technical Manual Section 400 Programming

							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-129
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
This timer applies to unanswered incoming calls on a DIL trunk that has a Delayed Ring position set (in 
FF2).  If no Delayed Ring position is set for the trunk, this Timer will not apply, and the call will 
continue to ring the extension indefinitely.
Related Programming:
Day1 Delayed Ring Type/Destination ...
     for analog CO trunks (pg. 2-31)     FF2 0 BSSC 04 0 Hold (0-4) Hold (0-9999) Hold
     for ISDN trunks (pg. 2-78)     FF2 1 BSSC 05 0 Hold (0-4) Hold (0-9999) Hold
     for T1 CO trunks (pg. 2-110)     FF2 2 BSSCC 05 0 Hold (0-4) Hold (0-9999) Hold
          
Notes:
This timer applies to unanswered incoming calls on a DIL trunk that has a Delayed Ring position set (in 
FF2).  If no Delayed Ring position is set for the trunk, this Timer will not apply, and the call will 
continue to ring the extension indefinitely.
CO Delayed Ring Timer (Day1)
(all CPCs) - Version 1.0 or higher
Set how long the system will ring an extension receiving an incoming call
during Day1 mode, before moving the call to the Delayed Ring position.
FF1   1   02   0003   Hold   (0-255)   Hold 
0 = 5 seconds (default - all CPCs, Version 1.3 and higher)
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds (1-255 = no. of seconds):



 	
, 
CO Delayed Ring Timer (Day2)
(all CPCs) - Version 1.0 or higher
Set how long the system will ring an extension receiving an incoming call
during Day2 mode, before moving to the Delayed Ring position.
FF1   1   02   0004   Hold   (0-255)   Hold 
 
0 = 5 seconds (default - all CPCs, Version 1.3 and higher)
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds (1-255 = no. of seconds):



 	
,  
						

							FF1: System Programming Section 400-Programming
Page 1-130
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
Day2 Delayed Ring Type/Destination ...
     for analog CO trunks (pg. 2-32)     FF2 0 BSSC 04 2 Hold (0-4) Hold (0-9999) Hold
     for ISDN trunks (pg. 2-79)     FF2 1 BSSC 05 2 Hold (0-4) Hold (0-9999) Hold
     for T1 CO trunks (pg. 2-111)     FF2 2 BSSCC 05 2 Hold (0-4) Hold (0-9999) Hold
        
Notes:
This timer applies to unanswered incoming calls on a DIL trunk that has a Delayed Ring position set (in 
FF2).  If no Delayed Ring position is set for the trunk, this Timer will not apply, and the call will 
continue to ring the extension indefinitely.
Related Programming:
Night Delayed Ring Type/Destination ...
     for analog CO trunks (pg. 2-33)     FF2 0 BSSC 04 4 Hold (0-4) Hold (0-9999) Hold
     for ISDN trunks (pg. 2-80)     FF2 1 BSSC 05 4 Hold (0-4) Hold (0-9999) Hold
     for T1 CO trunks (pg. 2-112)     FF2 2 BSSCC 05 4 Hold (0-4) Hold (0-9999) Hold
CO Delayed Ring Timer (Night)
(all CPCs) - Version 1.0 or higher
Set how long the system will ring an extension receiving an incoming call
during Night mode, before moving to the Delayed Ring position.
FF1   1   02   0005   Hold   (0-255)   Hold 
 
 
0 = 5 seconds (default - 
all CPCs, Version 1.3 and higher)
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds (1-255 = no. of seconds):




 	
, )9 
						

							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-131
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
This 
CO Delayed Ring Timer (Busy) applies to all system modes:  Day1, Day2, and Night.
(all CPCs - Version 1.3 and higher)   If the above address is set to 0=Continue to queue the call, the caller will 
hear ringback tone while the call is being queued on the busy extension.
(all CPCs - Version 1.3 and higher)   If the call is on a DIL trunk but no Delayed Ring position has been set, 
the call will be queued on the busy extension until it becomes idle, regardless of the above setting.
Related Programming:
Day1/Day2/Night Delayed Ring Type/Destination ...
     for analog CO trunks (pg. 2-31)     FF2 0 BSSC 04 0 Hold (0-4) Hold (0-9999) Hold (0-4) Hold...
     for ISDN trunks (pg. 2-78)     FF2 1 BSSC 05 0 Hold (0-4) Hold (0-9999) Hold (0-4) Hold...
     for T1-CO trunks (pg. 2-110)     FF2 2 BSSCC 05 0 Hold (0-4) Hold (0-9999) Hold (0-4) Hold...
CO Delayed Ring Timer (Busy)
(all CPCs) - Version 1.0 or higher
Set how long the system will queue an incoming call on a busy extension,
before moving to the delayed-ring position.
FF1   1   02   0006   Hold   (0-255)   Hold 
 
0 = 5 seconds  (all CPCs - below Version 1.3)
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds
default:  120 seconds (1-255 = no. of seconds):



 	
5 7- %
or:  0 = Continue to queue the call on the busy
idle. 
 
(all CPCs - Version 1.3 and higher)
extension indefinitely, until it becomes 
						

							FF1: System Programming Section 400-Programming
Page 1-132
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
            
Notes:
Alarm Ringing:  Ringing frequency/interval changes for an incoming call that rings unanswered for 
longer than the 
Slide Ring/Alarm Ring Timer. 
Slide Ringing:  A type of delayed ringing for extensions with trunk line appearances.  An incoming call 
on a trunk enabled for 
Slide Ringing (see FF2) will ring at the assigned extension or hunt group first 
(see 
Day1/2/Night Ring Assignments in FF2).  Then, after the 
Slide Ring/Alarm Ring Timer expires, 
the call will begin ringing at the extension(s) with line appearances (see 
FF-Key Feature Assignment 
in FF4).
Related Programming:
Ring Alarm Frequency (pg. 1-106)     FF1 0 21 0001 Hold (0-6) Hold
Ring Alarm Pattern (pg. 1-107)     FF1 0 21 0002 Hold (0-12) Hold
Alarm Ringing (pg. 2-24) on analog CO trunks     FF2 0 BSSC 02 13 Hold (0 or 1) Hold
Slide Ringing (pg. 2-25) on analog CO trunks     FF2 0 BSSC 02 14 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-68) on ISDN trunks     FF2 1 BSSC 03 06 Hold (0 or 1) Hold
Slide Ringing (pg. 2-69) on ISDN trunks     FF2 1 BSSC 03 07 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-102) on T1-CO trunks     FF2 2 BSSCC 03 11 Hold (0 or 1) Hold
Slide Ringing (pg. 2-103) on T1-CO trunks     FF2 2 BSSCC 03 12 Hold (0 or 1) Hold
Slide Ring/Alarm Ring Timer (Day1)
(all CPCs) - Version 1.0 or higher
Set how long an incoming call will ring unanswered before moving to the
Slide Ring position(s) or to the Alarm Ring frequency/pattern during Day1 mode.
FF1   1   02   0007   Hold   (0-255)   Hold 
 
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
default:  20 seconds 0 = 5 seconds
(1-255 = no. of seconds):



% 	
,  
						

							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-133
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
Notes:
Related Programming:
Ring Alarm Frequency (pg. 1-106)     FF1 0 21 0001 Hold (0-6) Hold
Ring Alarm Pattern (pg. 1-107)     FF1 0 21 0002 Hold (0-12) Hold
Alarm Ringing (pg. 2-24) on analog CO trunks     FF2 0 BSSC 02 13 Hold (0 or 1) Hold
Slide Ringing (pg. 2-25) on analog CO trunks     FF2 0 BSSC 02 14 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-68) on ISDN trunks     FF2 1 BSSC 03 06 Hold (0 or 1) Hold
Slide Ringing (pg. 2-69) on ISDN trunks     FF2 1 BSSC 03 07 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-102) on T1-CO trunks     FF2 2 BSSCC 03 11 Hold (0 or 1) Hold
Slide Ringing (pg. 2-103) on T1-CO trunks     FF2 2 BSSCC 03 12 Hold (0 or 1) Hold
        
Slide Ring/Alarm Ring Timer (Day2)
(all CPCs) - Version 1.0 or higher
Set how long an unanswered incoming call will ring before moving to the
Slide Ring position(s) or to the Alarm Ring frequency/pattern during Day2 mode.
FF1   1   02   0008   Hold   (0-255)   Hold 
 
1 = 1 second
2 = 2 seconds
default:  20 seconds0 = 5 seconds
...
255 = 255 seconds (1-255 = no. of seconds):



 	
, 
Slide Ring/Alarm Ring Timer (Night)
(all CPCs) - Version 1.0 or higher
Set how long an unanswered incoming call will ring before moving to the
Slide Ring position(s) or to the Alarm Ring frequency/pattern during Night mode.
FF1   1   02   0009   Hold   (0-255)   Hold 
 
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds 
default:  20 seconds 0 = 5 seconds
(1-255 = no. of seconds):



& 	
, )9 
						

							FF1: System Programming Section 400-Programming
Page 1-134
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Ring Alarm Frequency (pg. 1-106)     FF1 0 21 0001 Hold (0-6) Hold
Ring Alarm Pattern (pg. 1-107)     FF1 0 21 0002 Hold (0-12) Hold
Alarm Ringing (pg. 2-24) on analog CO trunks     FF2 0 BSSC 02 13 Hold (0 or 1) Hold
Slide Ringing (pg. 2-25) on analog CO trunks     FF2 0 BSSC 02 14 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-68) on ISDN trunks     FF2 1 BSSC 03 06 Hold (0 or 1) Hold
Slide Ringing (pg. 2-69) on ISDN trunks     FF2 1 BSSC 03 07 Hold (0 or 1) Hold
Alarm Ringing (pg. 2-102) on T1 CO trunks     FF2 2 BSSCC 03 11 Hold (0 or 1) Hold
Slide Ringing (pg. 2-103) on T1 CO trunks     FF2 2 BSSCC 03 12 Hold (0 or 1) Hold
        
Notes:
Related Programming:
Extension COS: Long Talk Alarm (pg. 1-66)     FF1 0 03 (00-15) 40 Hold (0 or 1) Hold
Long Talk Alarm #2 Timer (pg. 1-135)     FF1 1 02 0011 Hold (0-255) Hold
Long Talk Alarm (pg. 2-23) on analog CO trunks     FF2 0 BSSC 02 12 Hold (0 or 1) Hold
Long Talk Alarm (pg. 2-68) on ISDN trunks     FF2 1 BSSC 03 05 Hold (0 or 1) Hold
Long Talk Alarm (pg. 2-102) on T1 CO trunks     FF2 2 BSSCC 03 10 Hold (0 or 1) Hold
Long Talk Alarm #1 Timer
(all CPCs) - Version 1.0 or higher
Set how long an outgoing call can last before the first Long Talk Alarm tone
is sent to the extension.
FF1   1   02   0010   Hold   (0-255)   Hold 
 
0 = 5 seconds
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds
default:  180 seconds (1-255 = no. of seconds):



 	
5! %,4 /52  
						

							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-135
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
Extension COS: Long Talk Alarm (pg. 1-66)     FF1 0 03 (00-15) 40 Hold (0 or 1) Hold
Long Talk Alarm #1 Timer (pg. 1-134)     FF1 1 02 0010 Hold (0-255) Hold
Long Talk Alarm (pg. 2-23) on analog CO trunks     FF2 0 BSSC 02 12 Hold (0 or 1) Hold
Long Talk Alarm (pg. 2-68) on ISDN trunks     FF2 1 BSSC 03 05 Hold (0 or 1) Hold
Long Talk Alarm (pg. 2-102) on T1 CO trunks     FF2 2 BSSCC 03 10 Hold (0 or 1) Hold
        
Notes:
Long Talk Alarm #2 Timer
(all CPCs) - Version 1.0 or higher
Set the interval between subsequent Long Talk Alarm tones (after the first tone
is sent to the extension during the outbound call -- see previous address).
FF1   1   02   0011   Hold   (0-255)   Hold 
0 = 5 seconds
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds
default:  60 seconds (1-255 = no. of seconds):


 	
5! %,4 /52 
Paging Timer (Tie-Lines)
(all CPCs) - Version 1.0 or higher
Set the amount of time the system will allow a tie-line caller to use paging.
FF1   1   02   0012   Hold   (0-255)   Hold
 
 
0 = 5 seconds
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds
default:  30 seconds (1-255 = no. of seconds):


 	
$ % %* 
						

							FF1: System Programming Section 400-Programming
Page 1-136
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Related Programming:
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)     FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
Paging Group Members (pg. 5-22)     FF5 4 (01-10) (02-73) Hold (0-9999) Hold
       
Notes:
Related Programming:
Extension COS: Onhook Trunk-to-Trunk Transfer (pg. 1-70)     FF1 0 03 (00-15) 45 Hold (0 or 1) Hold
        
Trunk-to-Trunk Connection Timer
(all CPCs) - Version 1.0 or higher
Set the amount of time the system will monitor a trunk-to-trunk connection
before disconnecting.
FF1   1   02   0013   Hold   (0-255)   Hold 
 
0 = no check (allow indefinitely)
1 = 1 minute
2 = 2 minutes
... 
255 = 255 minutes
default:  60 minutes  (1 hour) (1-255 = no. of minutes):


 	
%3 ! %3 %
Queuing Timer (ARS)
(all CPCs) - Version 1.0 or higher
Set the amount of time the system will queue an outbound call through
Automatic Route Selection (ARS) for a trunk line to become available.
FF1   1   02   0014   Hold   (0-255)   Hold 
 
0 = 5 seconds
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds
default:  15 seconds (1-255 = no. of seconds):


 	
/ D-- 
						

							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-137
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
If this Queuing Timer expires before a trunk becomes available, the call will either move to the next 
queuing level or the caller will receive busy tone, depending on ARS settings.
Related Programming:
ARS/LCR Setting (pg. 1-27)     FF1 0 02 0010 Hold (0 or 1) Hold
Trunk Queuing for Originator (Route List) (pg. 6-20)     FF6 1 01 (01-50) 0003 Hold (0 or 1) Hold
        
Notes:
(all CPCs - Version 1.3 and higher)   If the DID trunk does not have a Delayed Ring position set, the call will 
continue to ring the extension indefinitely, or follow its Call-Forward settings (if any).
Related Programming:
DID/DNIS Dial Table (“A” Side) (pg. 1-169)     FF1 4 02 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
DID/DNIS Dial Table (“B” Side) (pg. 1-171)     FF1 4 04 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
DID Delayed Ring Timer
(all CPCs) - Version 1.0 or higher
Set the amount of time a DID (Direct Inward Dial) call will ring before
moving to the delayed-ring position.
FF1   1   02   0015   Hold   (0-255)   Hold 
 
0 = No delayed ring
1 = 1 second
2 = 2 seconds
... 
255 = 255 seconds (1-255 = no. of seconds):



 	
, & 
default:  20 seconds 
						

							FF1: System Programming Section 400-Programming
Page 1-138
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1  1  03:   Extension Timer 1
        
Notes:
Related Programming:
        
Call Forward/DND Confirmation Tone Timer
(all CPCs) - Version 1.0 or higher
Set the duration of the Call Forwarding tone or Do-Not-Disturb confirmation tone
sent to an extension when the user goes off-hook or presses ON/OFF while Call
Forwarding or DND is activated. 
FF1   1   03   0001   Hold   (0-255)   Hold 
 
0 = no tone issued
1 = 1 second
2 = 2 seconds
3 = 3 seconds  (default)
...
255 = 255 seconds



 	A0) %!
Message-Waiting Tone Timer
(all CPCs) - Version 1.0 or higher
Set the duration of the Message-Waiting confirmation tone sent to an extension
when the user goes off-hook or presses ON/OFF while the extension is in receipt
of a message-waiting.
FF1   1   03   0002   Hold   (0-255)   Hold 
 
0 = no tone issued
1 = 1 second
2 = 2 seconds
3 = 3 seconds  (default) 
...
255 = 255 seconds



 	21A%!