Panasonic Digital Business System 576 Technical Manual Section 400 Programming

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-21
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
To view Day1 Delayed Ring Destination for 2101: Hold 2101-041  :283
 D1 D-Destination
To view Day1 Delayed Ring Destination for the next 
port position, 2102:BLK-DOWN 2102-041  :301
 D1 D-Destination
To back up to previous address, Day1 Delayed Ring 
Type, for same port (2102):VOL s
  (Volume-Up) 2102-040  :1
 Day1 D-Ring Typ
To view Day1 Ring Type for next port (2103): BLK-DOWN 2103-040  :1
 Day1 D-Ring Typ
To return to the Delayed Ring Assignments sub-
menu:AUTO 2103-04*
Delayed Ring
To toggle forward through sub-menus for 2103 (stay-
ing on the same sub-menu level):VOL t
  (Volume-Down) 2103-05  :1
 Tenant Group
(an asterisk in the display represents settings within 
the sub-menu)VOL t
  (Volume-Down) 2103-06*
 TRK-TRS Class
To enter the currently displayed sub-menu: HOLD 2103-060  :1
 Day1/2 TRS CLS
To view the next setting in this sub-menu: HOLD 2103-061  :1
 Night TRS CLS
To go back to the beginning of Programming Mode: PROG
    PROGRAM V1.0
To enter Digital Extension addresses: FF3 + Hold 30-
 KTEL/SLT
...and so on.
To exit Programming Mode:
(display returns to normal operating mode)
ON/OFF 11:55 Thu FEB 12
   301 Davidson C 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-22
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix B
Default Settings  
The following tables show the default settings for all DBS 576 programming addresses.  
For the acceptable ranges of extension numbers, trunks, etc. in different system 
configurations, see Section 300-Installation.
Defaults for 0: SYSTEM CONFIGURATION        
Defaults for FF1: SYSTEM PROGRAMMING 
      
FF Key Address Topic Default Page
00 Hold (1-6) Hold System Size -- 0-5
01 (1-6) (01-12) Hold (1-99) Hold Free Slot Assignment -- 0-5
02 (1-6) (13 or 14) Hold (50) Hold Option Slot Assignment -- 0-6
FF Key Address Topic Default Page
FF1 0: System Common1-9
FF1 0 01: General 11-9
FF1 0 01 0001 Hold (0 or 1) Hold Splash Tone: Voice Calls 1 (Enabled) 1-9
FF1 0 01 0002 Hold (0 or 1) Hold Splash Tone: Internal Paging 1 (Enabled) 1-9
FF1 0 01 0003 Hold (0 or 1) Hold Splash Tone: Busy Override (Start) 1 (Enabled) 1-10
FF1 0 01 0004 Hold (0 or 1) Hold Splash Tone: Busy Override (Continuous) 0 (Disabled) 1-10
FF1 0 01 0005 Hold (0 or 1) Hold Splash Tone: 3-Party Conference 0 (Disabled) 1-11
FF1 0 01 0006 Hold (0 or 1) Hold Exclusive Hold (CO Key) 1 (Enabled) 1-11
FF1 0 01 0007 Hold (0 or 1) Hold Virtual Key LED: Answer Control #1 0 (Free-up key) 1-12
FF1 0 01 0008 Hold (0 or 1) Hold Virtual Key LED: Answer Control #2 1 (Free-up key) 1-13
FF1 0 01 0009 Hold (0 or 1) Hold Floating Hold on Trunk Key 0 (Disabled) 1-14
FF1 0 01 0010 Hold (0 or 1) Hold Floating Hold on Virtual Port Key 0 (Disabled) 1-14
FF1 0 01 0011 Hold (0 or 1) Hold Hot Line/MCO Preference for “ON/OFF” Key 0 (Disabled) 1-15
FF1 0 01 0012 Hold (0 or 1) Hold Programming Mode Entry 1 (Allowed) 1-15
FF1 0 01 0013 Hold (0 or 1) Hold Built-In VM: Voice Mail Access Key 1 (Enabled) 1-16
FF1 0 01 0014 Hold (0 or 1) Hold Built-In VM: Mailbox Key 1 (Enabled) 1-16
FF1 0 01 0015 Hold (0 or 1) Hold Built-In VM: Message Retrieve Key 1 (Enabled) 1-17
FF1 0 01 0016 Hold (0 or 1) Hold Off-Hook Monitor 1 (Enabled) 1-17
FF1 0 01 0017 Hold (0 or 1) Hold Handset Mute 1 (Enabled) 1-18
FF1 0 01 0018 Hold (0 or 1) Hold Hookflash on Rotary SLTs 0 (hookflash) 1-18
FF1 0 01 0019 Hold (0 or 1) Hold ISDN Outgoing Control 0 (Disabled) 1-19
FF1 0 01 0020 Hold (0 or 1) Hold Automatic BLF on DSS and EM/24 Units 0 (Disabled) 1-19
FF1 0 01 0021 Hold (0 or 1) Hold Caller ID Log Outgoing Control 0 (Disabled) 1-20
FF1 0 01 0022 Hold (0 or 1) Hold Caller ID Log Private/Out-of-Area Control 1 (Enabled) 1-20
FF1 0 01 0023 Hold (0 or 1) Hold Time Display Mode 1 (12-hour) 1-21 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-23
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1 0 02: General 21-22
FF1 0 02 0001 Hold (0 or 1) Hold Trunk Numbering 0 (2-digit) 1-22
FF1 0 02 0002 Hold (0 or 1) Hold SSD Code Numbering 1 (3-digit) 1-22
FF1 0 02 0003 Hold (0 or 1) Hold SSD Assignment to Groups 0 (Disabled) 1-23
FF1 0 02 0004 Hold (0 or 1) Hold Trunk Access in Speed Dialing 1 (Enabled) 1-23
FF1 0 02 0005 Hold (0 or 1) Hold Intercom Voice Call Pickup 0 (Disabled) 1-24
FF1 0 02 0006 Hold (0 or 1) Hold BLF Call Pickup 1 (Enabled) 1-24
FF1 0 02 0007 Hold (0 or 1) Hold Day/Night Mode Assignment 0 (System-wide) 1-25
FF1 0 02 0008 Hold (0 or 1) Hold Step Calling: Intercom Calls 0 (Disabled) 1-26
FF1 0 02 0009 Hold (0 or 1) Hold Step Calling: DISA/Tie-Line 0 (Disabled) 1-26
FF1 0 02 0010 Hold (0 or 1) Hold ARS/LCR Setting 0 (Disabled) 1-27
FF1 0 02 0011 Hold (0 or 1) Hold Advanced Routing for MCO Access 0 (Disabled) 1-27
FF1 0 02 0012 Hold (0 or 1) Hold Page Override 1 (Enabled) 1-28
FF1 0 02 0013 Hold (0 or 1) Hold Paging Answer on Tie-Line 0 (No ansr.signl) 1-29
FF1 0 02 0014 Hold (0 or 1) Hold Howler Tone 0 (Disabled) 1-29
FF1 0 02 0015 Hold (0 or 1) Hold DISA Invalid Number 0 (multi-incomg.) 1-30
FF1 0 02 0016 Hold (0 or 1) Hold DISA Interdigit Timeout 0 (multi-incomg.) 1-30
FF1 0 02 0017 Hold (0 or 1) Hold DISA No-Answer Timeout 0 (multi-incomg.) 1-31
FF1 0 02 0018 Hold (0 or 1) Hold DID to Busy Extension (Day1) 0 (Busy signal) 1-31
FF1 0 02 0019 Hold (0 or 1) Hold DID to Busy Extension (Day2) 0 (Busy signal) 1-32
FF1 0 02 0020 Hold (0 or 1) Hold DID to Busy Extension (Night) 0 (Busy signal) 1-32
FF1 0 02 0021 Hold (0 or 1) Hold DID to Incorrect Number (Day1) 0 (Busy signal) 1-33
FF1 0 02 0022 Hold (0 or 1) Hold DID to Incorrect Number (Day2) 0 (Busy signal) 1-33
FF1 0 02 0023 Hold (0 or 1) Hold DID to Incorrect Number (Night) 0 (Busy signal) 1-34
FF1 0 03:  Extension COS Definitions1-35
FF1 0 03 (00-15) 01 Hold (0 or 1) Hold Extension COS: Intercom Calling Type 1 (Voice) 1-36
FF1 0 03 (00-15) 02 Hold (0 or 1) Hold Extension COS: Onhook Transfer at Ringback 0 (Allowed) 1-37
FF1 0 03 (00-15) 03 Hold (0 or 1) Hold3 Extension COS: Onhook Transfer at Talk 0 (Allowed) 1-38
FF1 0 03 (00-15) 04 Hold (0 or 1) Hold Extension COS: Onhook Transfer at Camp-On 0 (Allowed) 1-39
FF1 0 03 (00-15) 05 Hold (0 or 1) Hold Extension COS: Exclusive Hold for Non-
Appearing CO0 (System Hold) 1-40
FF1 0 03 (00-15) 06 Hold (0 or 1) Hold Extension COS: Exclusive Hold on SLTs 0 (System Hold) 1-41
FF1 0 03 (00-15) 07 Hold (0 or 1) Hold Extension COS: Brokers Hold on SLTs 1 (Broker’s Hold) 1-42
FF1 0 03 (00-15) 08 Hold (0 or 1) Hold Extension COS: Hookflash Control on SLTs 0 (Allowed) 1-43
FF1 0 03 (00-15) 09 Hold (0 or 1) Hold Extension COS: SSD Assignment 1 (Not Allowed) 1-43
FF1 0 03 (00-15) 10 Hold (0 or 1) Hold Extension COS: SSD Assignment to MCO 
Tenant Groups1 (Not Allowed) 1-44
FF1 0 03 (00-15) 11 Hold (0 or 1) Hold Extension COS: SSD Dialing 0 (Allowed) 1-45
FF1 0 03 (00-15) 12 Hold (0 or 1) Hold Extension COS: Intercom Redialing 1 (Not Allowed) 1-46
FF1 0 03 (00-15) 13 Hold (0 or 1) Hold Extension COS: Direct Trunk Access 0 (Allowed) 1-46
FF1 0 03 (00-15) 14 Hold (0 or 1) Hold Extension COS: MCO Incoming Call Answer 0 (Allowed) 1-47
FF1 0 03 (00-15) 15 Hold (0 or 1) Hold Extension COS: Paging 0 (Allowed) 1-48
FF1 0 03 (00-15) 16 Hold (0 or 1) Hold Extension COS: Auto Repeat Dial 0 (Allowed) 1-48
FF1 0 03 (00-15) 17 Hold (0 or 1) Hold Extension COS: DND Set/Clear 0 (Allowed) 1-49
FF1 0 03 (00-15) 18 Hold (0 or 1) Hold Extension COS: DND Set/Clear (Other) 1 (Not Allowed) 1-50
FF1 0 03 (00-15) 19 Hold (0 or 1) Hold Extension COS: Call Forward/All Calls 0 (Allowed) 1-50
FF1 0 03 (00-15) 20 Hold (0 or 1) Hold Extension COS: Call Forward/No Answer 0 (Allowed) 1-51
FF1 0 03 (00-15) 21 Hold (0 or 1) Hold Extension COS: Call Forward/Busy 0 (Allowed) 1-52 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-24
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF1 0 03 (00-15) 22 Hold (0 or 1) Hold Extension COS: Call Forward/Other 1 (Not Allowed) 1-52
FF1 0 03 (00-15) 23 Hold (0 or 1) Hold Extension COS: User Log-In 1 (Not Allowed) 1-53
FF1 0 03 (00-15) 24 Hold (0 or 1) Hold Extension COS: Priority Message Waiting 
Send (VM)1 (Not Allowed) 1-54
FF1 0 03 (00-15) 25 Hold (0 or 1) Hold Extension COS: Message Waiting Send 0 (Allowed) 1-55
FF1 0 03 (00-15) 26 Hold (0 or 1) Hold Extension COS: System Mode Switch 1 (Not Allowed) 1-55
FF1 0 03 (00-15) 27 Hold (0 or 1) Hold Extension COS: Busy Override Send 0 (Allowed) 1-56
FF1 0 03 (00-15) 28 Hold (0 or 1) Hold Extension COS: Manual Camp-On Send 0 (Allowed) 1-57
FF1 0 03 (00-15) 29 Hold (0 or 1) Hold Extension COS: Manual Camp-On Receive 0 (Allowed) 1-58
FF1 0 03 (00-15) 30 Hold (0 or 1) Hold Extension COS: Callback Request Send 0 (Allowed) 1-58
FF1 0 03 (00-15) 31 Hold (0 or 1) Hold Extension COS: Callback Request Receive 0 (Allowed) 1-59
FF1 0 03 (00-15) 32 Hold (0 or 1) Hold Extension COS: Trunk Queuing 0 (Allowed) 1-60
FF1 0 03 (00-15) 33 Hold (0 or 1) Hold Extension COS: Manual DND Override Send 1 (Not Allowed) 1-61
FF1 0 03 (00-15) 34 Hold (0 or 1) Hold Extension COS: Forced DND Override 1 (Not Allowed) 1-61
FF1 0 03 (00-15) 35 Hold (0 or 1) Hold Extension COS: 8-Party Conference 0 (Allowed) 1-62
FF1 0 03 (00-15) 36 Hold (0 or 1) Hold Extension COS: Voice Call Send 0 (Allowed) 1-63
FF1 0 03 (00-15) 37 Hold (0 or 1) Hold Extension COS: Voice Call Receive 0 (Allowed) 1-64
FF1 0 03 (00-15) 38 Hold (0 or 1) Hold Extension COS: Dial Tone Stop 1 (Receive
 internl dial tone)1-64
FF1 0 03 (00-15) 39 Hold (0 or 1) Hold Extension COS: Dial Tone Pre-Pause Check 1 (Check/send 
re-order tone)1-65
FF1 0 03 (00-15) 40 Hold (0 or 1) Hold Extension COS: Long Talk Alarm 0 (Disabled) 1-66
FF1 0 03 (00-15) 41 Hold (0 or 1) Hold Extension COS: Recall Timer Apply 0 (Ext.Recall) 1-67
FF1 0 03 (00-15) 42 Hold (0 or 1) Hold Extension COS: Forced ARS 0 (Disabled) 1-68
FF1 0 03 (00-15) 43 Hold (0 or 1) Hold Extension COS: API Event Reporting 1 (Enabled) 1-69
FF1 0 03 (00-15) 44 Hold (0 or 1) Hold Extension COS: Call Forward/Outside 0 (Allowed) 1-69
FF1 0 03 (00-15) 45 Hold (0 or 1) Hold Extension COS: Onhook Trunk-to-Trunk 
Transfer1 (Not Allowed) 1-70
FF1 0 03 (00-15) 46 Hold (0 or 1) Hold Extension COS: Station Call Park Answer 0 (Allowed) 1-71
FF1 0 03 (00-15) 47 Hold (0 or 1) Hold Extension COS: Station Call Park Transfer 0 (Allowed) 1-72
FF1 0 03 (00-15) 48 Hold (0 or 1) Hold Extension COS: OHVA 0 (Allowed) 1-72
FF1 0 03 (00-15) 49 Hold (0 or 1) Hold Extension COS: OHVA Answer 0 (Allowed) 1-73
FF1 0 03 (00-15) 50 Hold (0 or 1) Hold Extension COS: Call-Waiting Answer at HOLD 1 (Not Allowed) 1-74
FF1 0 04: Trunk COS Definitions 1-75
FF1 0 04 (00-15) 01 Hold (0 or 1) Hold Trunk COS: Incoming Ring Tone Source 0 (use trunk’s 
Ring Pattern)1-75
FF1 0 04 (00-15) 02 Hold (0 or 1) Hold Trunk COS: Dial Tone to Tie-Line 1 (Enabled) 1-76
FF1 0 04 (00-15) 03 Hold (0 or 1) Hold Trunk COS: Forced Recovery at Fast-Busy 0 (Enabled) 1-77
FF1 0 04 (00-15) 04 Hold (0 or 1) Hold Trunk COS: DID/DNIS Table 0 (“A” side) 1-77
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold Trunk COS: Paging on DISA/Tie-Line Call 0 (Not Allowed) 1-78
FF1 0 04 (00-15) 06 Hold (0 or 1) Hold Trunk COS: DISA ID Verification 0 (Verify) 1-79
FF1 0 05: Serial Ports1-80
FF1 0 05 0001 Hold (0-7) Hold Serial Port 1: Data Format 5  (8bits/NoPar./
1stop)1-80
FF1 0 05 0002 Hold (0-5) Hold Serial Port 1: Baud Rate 5 (9600 bps) 1-81
FF1 0 05 0003 Hold (0-2) Hold Serial Port 1: Protocol 0 (No order) 1-81
FF1 0 05 0004 Hold (0 or 1) Hold Serial Port 1: Echo Control (future use) 0 (Off) 1-82
FF1 0 05 0005 Hold (1-255) Hold Serial Port 1: Maximum Input Digits (future 
use)80 digits 1-82 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-25
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1 0 05 0017 Hold (0-7) Hold RAI Serial Port: Data Format 5 (8bits/NoPar./
1stop)1-83
FF1 0 05 0018 Hold (0-5) Hold RAI Serial Port: Baud Rate 5 (9600 bps) 1-83
FF1 0 05 0019 Hold (0-2) Hold RAI Serial Port: Protocol 0 (No order) 1-84
FF1 0 05 0020 Hold (0 or 1) Hold RAI Serial Port: Echo Control 0 (Off) 1-84
FF1 0 05 0021 Hold (1-255) Hold RAI Serial Port: Maximum Input Digits 1 digit 1-85
FF1 0 05 0033 Hold (0-7) Hold Serial Port 2: Data Format 5 (8bits/NoPar./
1stop)1-85
FF1 0 05 0034 Hold (0-5) Hold Serial Port 2: Baud Rate 5 (9600 bps) 1-86
FF1 0 05 0035 Hold (0-2) Hold Serial Port 2: Protocol 0 (No order) 1-86
FF1 0 05 0036 Hold (0 or 1) Hold Serial Port 2: Echo Control 0 (Off) 1-87
FF1 0 05 0037 Hold (1-255) Hold Serial Port 2: Maximum Input Digits 80 digits 1-87
FF1 0 06: Serial Port Output Data1-88
FF1 0 06 0001 Hold (0-2) Hold SMDR Data to Serial Port 1 (Port 1) 1-88
FF1 0 06 0002 Hold (0-2) Hold Fault Alarm Data to Serial Port 0 (None) 1-88
FF1 0 06 0003 Hold (0-2) Hold Programmed Data to Serial Port 2 (Port 2) 1-89
FF1 0 06 0004 Hold Not Used -- 1-89
FF1 0 06 0005 Hold (0-2) Hold Bus Monitor Data to Serial Port 2 (Port 2) 1-90
FF1 0 07 and 08: PBX Parameters1-91
FF1 0 07 (0001-0012) Hold (0-16) Hold Auto Pause Position Behind PBX 1 (after 1st digit, 
for ”9”)
0 (None, for all 
other digits)1-91
FF1 0 08 (0001-0006) Hold FLASH  (0-
9999) HoldPBX Trunk Access Codes Code 1:  9
Codes 2-6: none1-92
FF1 0 09: SMDR Output Format1-93
FF1 0 09 0001 Hold (0-2) Hold SMDR Output Format 1 (Format #1) 1-93
FF1 0 10 and 11: Call Restriction Between COS1-94
FF1 0 10 (00-15) (01-16) Hold (0 or 1) 
HoldCall Restriction Between Extension COS 0 (Allowed) 1-94
FF1 0 11 (00-15) (01-16) Hold (0 or 1) 
HoldCall Restriction Between Trunk COS 0 (Allowed) 1-95
FF1 0 12, 13, and 14: MOH Source1-96
FF1 0 12 (0001-0072) Hold (0-3) Hold MOH Source for CO Trunks 0 (Internal single 
tone)1-96
FF1 0 13 (0001-0072) Hold (0-3) Hold MOH Source for Tie-Lines 0 (Internal single 
tone)1-97
FF1 0 14 (0001-0072) Hold (0-3) Hold MOH Source for Intercom Calls 0 (Internal single 
tone)1-98
FF1 0 15, 16, and 17: SSD Blocks1-99
FF1 0 15 (0001-0072) Hold (0-72) Hold SSD Block Assignment to MCO Tenant 
Groups1 (SSD Block 1) 1-99
FF1 0 16 0001 Hold (0-800) Hold SSD Common Block for MCO Tenant Groups 0 (none) 1-100
FF1 0 17 (0001-0144) Hold (0-799 or 0-
800) HoldSSD Block Assignment See table, page 
1-1011-100
FF1 0 18: Synchronized Clock1-103
FF1 018 (0001-0003) Hold (BSS/C) Hold Synchronized Clock  -- 1-103
FF1 0 19: TRS Class for Forced Account Codes1-104
FF1 0 19 0001 Hold (1-50) Hold TRS Class for Forced Account Codes TRS Class 1 1-104 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-26
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF1 0 20: Ext.No. Display for Closed-Number Calls1-104
FF1 0 20 0001 Hold (0-4) Hold Ext.No. Display for Closed-Number Calls 0 (no digits) 1-105
FF1 0 21: Ring Alarm for Unanswered Calls1-105
FF1 0 21 0001 Hold (0-6) Hold Ring Alarm Frequency 1 (400/562Hz) 1-106
FF1 0 21 0002 Hold (0-12) Hold Ring Alarm Pattern 5 (.5on/.5off) 1-107
FF1 0 22: Dealer Programming ID Code1-108
FF1 0 22 0001 Hold (0000-9999) Hold Dealer Programming ID Code 9999  1-108
FF1 0 23 and 24: Voice Mail Codes1-109
FF1 0 23 0001 Hold (0000-9999) Hold VM Answer Supervision Code -- (none) 1-109
FF1 0 24 0001 Hold (up to 8 char.) Hold VM Transfer Code #1: Prefix -- (none) 1-109
FF1 0 24 0002 Hold (up to 8 char.) Hold VM Transfer Code #1: Suffix -- (none) 1-110
FF1 0 24 0003 Hold (up to 8 char.) Hold VM Transfer Code #2: Prefix -- (none) 1-110
FF1 0 24 0004 Hold (up to 8 char.) Hold VM Transfer Code #2: Suffix -- (none) 1-111
FF1 0 25: Caller ID Add Digits1-112
FF1 0 25 0001 Hold (up to 4 char.) Hold Caller ID Log Outgoing Add Digits -- (none) 1-112
FF1 0 26: DISA ID Codes1-113
FF1 0 26 0001 Hold (0-10) Hold DISA ID Code Numbering 0 (no code) 1-113
FF1 0 26 (0002-0033) Hold (up to 10 digits 
or 1-50) HoldDISA ID Codes and TRS Assignments -- (no code)
0 (no TRS Class)1-114
FF1 1: System Timers1-115
FF1 1 01: Trunk Timer 11-115
FF1 1 01 0001 Hold (1-255) Hold Flash Timer 1 for Trunk Line 50 (800ms) 1-115
FF1 1 01 0002 Hold (1-255) Hold Flash Timer 2 for Trunk Line 5 (80ms) 1-117
FF1 1 01 0003 Hold (1-255) Hold Flash Timer for Auto-Repeat Dial 124 (1984ms) 1-117
FF1 1 01 0004 Hold (1-255) Hold Pause Timer 3 (seconds) 1-117
FF1 1 01 0005 Hold (1-255) Hold Call Duration Timer (analog CO) 10 (seconds) 1-118
FF1 1 01 0006 Hold (1-255) Hold Call Duration Timer (Tie-Lines) 10 (seconds) 1-118
FF1 1 01 0007 Hold (1-255) Hold Outpulse Delay Timer (analog CO) 3 (seconds) 1-119
FF1 1 01 0008 Hold (1-255) Hold Outpulse Delay Timer (analog Tie-Lines/ 
(Immediate-Start)1 (second) 1-119
FF1 1 01 0009 Hold (1-255) Hold Pre-Pause Timer (ISDN CO) 30 (seconds) 1-120
FF1 1 01 0010 Hold (1-255) Hold Interdigit Timer (ARS and ISDN CO) 10 (seconds) 1-120
FF1 1 01 0011 Hold
FF1 1 01 0012 HoldNot Used -- 1-121
FF1 1 01 0013 Hold (1-255) Hold Wink Wait Timer (analog Tie-Lines) 5 (seconds) 1-121
FF1 1 01 0014 Hold (1-255) Hold Start Timer for CO Busy Tone Detect (Auto-
Repeat Dial)5 (seconds) 1-122
FF1 1 01 0015 Hold (1-255) Hold CO Busy Tone Detect Timer (Auto-Repeat 
Dial)30 (seconds) 1-123
FF1 1 01 0016 Hold (1-255) Hold DTMF ON: Pattern #1 16 (80ms) 1-123
FF1 1 01 0017 Hold (1-255) Hold DTMF OFF: Pattern #1 9 (45ms) 1-124
FF1 1 01 0018 Hold (1-255) Hold DTMF ON/OFF: Pattern #2 1 (125ms on/
125ms off)1-125
FF1 1 01 0019 Hold (1-255) Hold DTMF ON/OFF: Pattern #3 2 (250ms on/
250ms off)1-126
FF1 1 02: Trunk Timer 21-127
FF1 1 02 0001 Hold (0-255) Hold DISA No-Answer Timer #1 30 (seconds) 1-127
FF1 1 02 0002 Hold (0-255) Hold Multiple Incoming No-Answer Timer #2 16 (seconds) 1-128 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-27
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1 1 02 0003 Hold (0-255) Hold CO Delayed Ring Timer (Day1) 0 (5 seconds) 1-129
FF1 1 02 0004 Hold (0-255) Hold CO Delayed Ring Timer (Day2) 0 (5 seconds) 1-129
FF1 1 02 0005 Hold (0-255) Hold CO Delayed Ring Timer (Night) 0 (5 seconds) 1-130
FF1 1 02 0006 Hold (0-255) Hold CO Delayed Ring Timer (Busy) 120 (seconds) 1-131
FF1 1 02 0007 Hold (0-255) Hold Slide Ring/Alarm Ring Timer (Day1) 20 (seconds) 1-132
FF1 1 02 0008 Hold (0-255) Hold Slide Ring/Alarm Ring Timer (Day2) 20 (seconds) 1-133
FF1 1 02 0009 Hold (0-255) Hold Slide Ring/Alarm Ring Timer (Night) 20 (seconds) 1-133
FF1 1 02 0010 Hold (0-255) Hold Long Talk Alarm #1 Timer 180 (seconds) 1-134
FF1 1 02 0011 Hold (0-255) Hold Long Talk Alarm #2 Timer 60 (seconds) 1-135
FF1 1 02 0012 Hold (0-255) Hold Paging Timer (Tie-Lines) 30 (seconds) 1-135
FF1 1 02 0013 Hold (0-255) Hold Trunk-to-Trunk Connection Timer 60 (minutes) 1-136
FF1 1 02 0014 Hold (0-255) Hold Queuing Timer (ARS) 15 (seconds) 1-136
FF1 1 02 0015 Hold (0-255) Hold DID Delayed Ring Timer 20 (seconds) 1-137
FF1 1 03: Extension Timer 11-138
FF1 1 03 0001 Hold (0-255) Hold Call Forward/DND Confirmation Tone Timer 3 (seconds) 1-138
FF1 1 03 0002 Hold (0-255) Hold Message-Waiting Tone Timer 3 (seconds) 1-138
FF1 1 03 0003 Hold (0-255) Hold Pre-Pause Timer at Internal Dial Tone (DP 
SLTs)30 (seconds) 1-139
FF1 1 03 0004 Hold (0-255) Hold Pre-Pause Timer at Internal Dial Tone (DTMF 
SLTs)15 (seconds) 1-140
FF1 1 03 0005 Hold (0-255) Hold Pre-Pause Timer at Internal Dial Tone (Digital 
Keyphones)0 (No check/
wait indefinitely)1-140
FF1 1 03 0006 Hold (0-255) Hold Interdigit Timer (DP SLTs) 15 (seconds) 1-141
FF1 1 03 0007 Hold (0-255) Hold Interdigit Timer (DTMF SLTs) 15 (seconds) 1-142
FF1 1 03 0008 Hold (0-255) Hold Interdigit Timer (Digital Keyphones) 0 (No check/
wait indefinitely)1-142
FF1 1 03 0009 Hold (0-255) Hold DTMF Receiver Queuing Timer 6 (seconds) 1-143
FF1 1 03 0010 Hold
FF1 1 03 0011 HoldNot Used -- 1-143
FF1 1 03 0012 Hold (0-255) Hold SLT Off Hook Signal Interval 10 (seconds) 1-144
FF1 1 03 0013 Hold (0-255) Hold BLF Delayed Ring Timer 16 (seconds) 1-144
FF1 1 04: Extension Timer 21-145
FF1 1 04 0001 Hold (0-255) Hold Hold Recall Start Timer (Extensions) 120 (seconds) 1-145
FF1 1 04 0002 Hold (0-255) Hold Hold Recall Start Timer (Attendant Group) 20 (seconds) 1-145
FF1 1 04 0003 Hold (0-255) Hold Hold Recall Start Timer (SLTs) 0 (No recall) 1-146
FF1 1 04 0004 Hold (0-255) Hold Transfer Recall Start Timer (Extensions/SLTs) 60 (seconds) 1-147
FF1 1 04 0005 Hold (0-255) Hold Transfer Recall Start Timer (Attendant Group) 20 (seconds) 1-147
FF1 1 04 0006 Hold (0-255) Hold Hold/Transfer Recall Ringing Duration Timer 60 (seconds) 1-148
FF1 1 04 0007 Hold (0-255) Hold Attendant Reversion Duration Timer 0 (continue ring) 1-148
FF1 1 04 0008 Hold (0-255) Hold Call Forward/No Answer Timer (Day1) 16 (seconds) 1-149
FF1 1 04 0009 Hold (0-255) Hold Call Forward/No Answer Timer (Day2) 16 (seconds) 1-149
FF1 1 04 0010 Hold (0-255) Hold Call Forward/No Answer Timer (Night) 16 (seconds) 1-150
FF1 1 04 0011 Hold (0-255) Hold Callback Ring Timer (Callback Request and 
Trunk Queuing)15 (seconds) 1-150
FF1 1 04 0012 Hold (0-255) Hold Timed Reminder Ring Timer 16 (seconds) 1-151
FF1 1 04 0013 Hold (0-255) Hold Timed Reminder Interval for Busy Extensions 180 (seconds) 1-152
FF1 1 04 0014 Hold
FF1 1 04 0015 HoldNot Used -- 1-152
FF1 1 04 0016 Hold (0-255) Hold Howler Tone Duration Timer (Extensions) 30 (seconds) 1-153
FF1 1 04 0017 Hold (0-255) Hold Station Call Park Recall Timer 180 (seconds) 1-153 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-28
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF1 2: Dial Plan1-154
FF1 2 01 (0001-0024) Hold (1-4) Hold Maximum/Minimum Dialing at Intercom Dial 
ToneSee table, page 
1-1541-154
FF1 2 02 (0001-0056) Hold (max. 4-digit 
Code) HoldDial Plan A: Flexible Feature Codes at Dial 
ToneSee table, page 
1-1551-155
FF1 2 03 (0001-0056) Hold (max. 4-digit 
Code) HoldDial Plan B: Flexible Feature Codes at Dial 
ToneSee table, page 
1-1571-157
FF1 2 04 (0001-0010) Hold (1-digit Code) 
HoldDial Plan A: Flexible Feature Codes at 
Ringback ToneSee table, page 
1-1591-159
FF1 2 05 (0001-0010) Hold (1-digit Code) 
HoldDial Plan B: Flexible Feature Codes at 
Ringback ToneSee table, page 
1-1601-160
FF1 2 06 (0001-0010) Hold (1-digit Code) 
HoldDial Plan A: Flexible Feature Codes at Busy 
ToneSee table, page 
1-1611-161
FF1 2 07 (0001-0010) Hold (1-digit Code) 
HoldDial Plan B: Flexible Feature Codes at Busy 
ToneSee table, page 
1-1621-162
FF1 3: MCO Access in Tenant Groups1-163
FF1 3 01 (0001-0360) Hold (0-99 or 0-72) 
HoldTenant Group MCO Access: Outbound Trunk 
GroupsSee table, page 
1-1641-164
FF1 3 02 (0001-0360) Hold (0-99) Hold Advanced Routing: Outbound Trunk Group 
Chains0 (none) 1-165
FF1 3 03 (0001-0072) Hold (1-99) Hold MCO Trunk Groups (Inbound Calls) See table, page 
1-1661-166
FF1 4: DID/DNIS Tables1-168
FF1 4 01 0001 Hold (1-4) Hold DID/DNIS Numbering (“A” Side) 4 (digits) 1-168
FF1 4 02 (000-575) (1-6) Hold (0-9999 or 
1-72) HoldDID/DNIS Dial Table (“A” Side) 0 (none) 1-169
FF1 4 03 0001 Hold (1-4) Hold DID/DNIS Numbering (“B” Side) 4 (digits) 1-170
FF1 4 04 (000-575) (1-6) Hold (0-9999 or 
1-72) HoldDID/DNIS Dial Table (“B” Side) 0 (none) 1-171
FF1 4 05 (0001-0192) Hold (setting) Hold DID Dialing to ISDN “S” Point -- 1-172
FF1 4 06 0001 Hold (0-3) Hold 3rd-party VM: DID Number Automatic Send 0 (do not send 
DID No.)1-174
FF1 4 06 0002 Hold (up to 8 char.) Hold 3rd-party VM: ID Code Prefix for DID (none) 1-174
FF1 4 06 0003 Hold (up to 8 char.) Hold 3rd-party VM: ID Code Suffix for DID (none) 1-175
FF1 5: Not Used
FF1 6: Not Used
FF1 7: Not Used1-175
1-175
1-175
FF1 8: Digital Pad Settings1-176
FF1 8 01 (0001-0240) Hold (0-31) Hold Digital Pad Settings for Extension Pad Class see tbl pg.1-176 1-176
FF1 8 02 (0001-0480) Hold (0-31) Hold Digital Pad Settings for Trunk Pad Class see tbls pg.1-179 
and 1-180 1-178
FF1 8 03 (0001-0008) Hold (0-31) Hold Digital Pad Settings for BGM see tbl pg.1-181 1-181
FF1 8 04 (0001-0024) Hold (0-31) Hold Digital Pad Settings for Paging Port Adapter see tbl pg.1-182 1-182
FF1 8 05 (0001-0024) Hold (0-31) Hold Digital Pad Settings for 3-Party Conference see tbl pg.1-184 1-183
FF1 8 06 (0001-0024) Hold (0-31) Hold Digital Pad Settings for 8-Party Conference see tbl pg.1-185 1-185 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-29
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Defaults for FF2: TRUNKS      
FF Key Address Topic Default Page
FF2 0: Analog Trunks (CO)2-7
FF2 0 BSSC 00 Hold (0-576) Hold Trunk Number Assignment -- 2-7
FF2 0 BSSC 01 00 Hold (0-3) Hold Trunk Signal Type LS & LS/GS:  0
GS:  1
DID Immed.:  22-8
FF2 0 BSSC 01 01 Hold (0 or 1) Hold Loop Detect 1 (Enabled) 2-8
FF2 0 BSSC 01 02 Hold (0 or 1) Hold Disconnect Detect 0 (Enabled) 2-9
FF2 0 BSSC 01 03 Hold (0 or 1) Hold Dial Pulse Minimum Pause 0 (625ms) 2-9
FF2 0 BSSC 01 04 Hold (0 or 1) Hold Ground Start Ring Type 0 (Enabled) 2-10
FF2 0 BSSC 01 05 Hold (0 or 1) Hold DID Ring Detect Timer 0 (32ms) 2-10
FF2 0 BSSC 01 06 Hold
FF2 0 BSSC 01 07 Hold
FF2 0 BSSC 01 08 Hold Not Used -- 2-11
FF2 0 BSSC 01 09 Hold (0 or 1) Hold Reverse Answer Signal Control 1 (Disabled) 2-11
FF2 0 BSSC 01 10 Hold (0 or 1) Hold Caller ID 0 (Disabled) 2-12
FF2 0 BSSC 01 11 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-12
FF2 0 BSSC 01 12 Hold (0-12) Hold Ring Pattern 0 (synch. w/CO) 2-13
FF2 0 BSSC 01 13 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-14
FF2 0 BSSC 01 14 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-14
FF2 0 BSSC 01 15 Hold (0-3) Hold Disconnect Supervision Timer
LS/GS: 0 (281ms)DID: 0 (96ms)2-15
FF2 0 BSSC 01 16 Hold (0-3) Hold Guard Timer for Outbound Calls 0 (.5 seconds) 2-15
FF2 0 BSSC 01 17 Hold (0-3) Hold Inbound Ground Detect Timer 0 (1 second) 2-16
FF2 0 BSSC 01 18 Hold  Not Used -- 2-16
FF2 0 BSSC 01 19 Hold (0-3) Hold  Ring Interval for Abandoned Calls 0 (5 seconds) 2-17
FF2 0 BSSC 02 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-17
FF2 0 BSSC 02 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-18
FF2 0 BSSC 02 02 Hold (0 or 1) Hold Dial Tone Detection 1 (Enabled)  2-18
FF2 0 BSSC 02 03 Hold (0 or 1) Hold Call Duration 1 (Use system 
timer)2-19
FF2 0 BSSC 02 04 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-19
FF2 0 BSSC 02 05 Hold (0 or 1) Hold Auto-Repeat Dial 1 (Allowed) 2-20
FF2 0 BSSC 02 06 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-20
FF2 0 BSSC 02 07 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-21
FF2 0 BSSC 02 08 Hold (0 or 1) Hold Caller ID Ring Control 0 (Wait) 2-21
FF2 0 BSSC 02 09 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-22
FF2 0 BSSC 02 10 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-22
FF2 0 BSSC 02 11 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-23
FF2 0 BSSC 02 12 Hold (0 or 1) Hold Long Talk Alarm 0 (Disabled) 2-23
FF2 0 BSSC 02 13 Hold (0 or 1) Hold Alarm Ringing 0 (Disabled) 2-24
FF2 0 BSSC 02 14 Hold (0 or 1) Hold Slide Ringing 0 (Disabled) 2-25
FF2 0 BSSC 02 15 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-26
FF2 0 BSSC 02 16 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-26
FF2 0 BSSC 02 17 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-27
FF2 0 BSSC 02 18 Hold
FF2 0 BSSC 02 19 Hold
FF2 0 BSSC 02 20 HoldNot Used -- 2-27 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-30
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF2 0 BSSC 03 0 Hold (0-6) Hold Day1 Ring Type 0 (multi-incomg.) 2-28
FF2 0 BSSC 03 1 Hold (0-9999) Hold Day1 Ring Destination -- 2-28
FF2 0 BSSC 03 2 Hold (0-6) Hold Day2 Ring Type 0 (multi-incomg.) 2-29
FF2 0 BSSC 03 3 Hold (0-9999) Hold Day2 Ring Destination -- 2-29
FF2 0 BSSC 03 4 Hold (0-6) Hold Night Ring Type 0 (multi-incomg.) 2-30
FF2 0 BSSC 03 5 Hold (0-9999) Hold Night Ring Destination -- 2-30
FF2 0 BSSC 04 0 Hold (0-4) Hold Day1 Delayed Ring Type 0 (Disabled) 2-31
FF2 0 BSSC 04 1 Hold (0-9999) Hold Day1 Delayed Ring Destination -- 2-31
FF2 0 BSSC 04 2 Hold (0-4) Hold Day2 Delayed Ring Type 0 (Disabled) 2-32
FF2 0 BSSC 04 3 Hold (0-9999) Hold Day2 Delayed Ring Destination -- 2-32
FF2 0 BSSC 04 4 Hold (0-4) Hold Night Delayed Ring Type 0 (Disabled) 2-33
FF2 0 BSSC 04 5 Hold (0-9999) Hold Night Delayed Ring Destination -- 2-33
FF2 0 BSSC 05 Hold (0-72) Hold Tenant Group Assignment  0 (none) 2-34
FF2 0 BSSC 06 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-34
FF2 0 BSSC 06 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-35
FF2 0 BSSC 07 Hold (1-16) Hold Trunk COS Assignment 1 2-35
FF2 0 BSSC 08 Hold (1-16) Hold Trunk Digital Pad Class Assignment 1 2-36
FF2 0: Analog Trunks (E&M Tie)2-37
FF2 0 BSSC 00 Hold (0-576) Hold Trunk Number Assignment -- 2-37
FF2 0 BSSC 01 00 Hold (0-5) Hold Trunk Signal Type 5 (E&M Wink) 2-38
FF2 0 BSSC 01 01 Hold
FF2 0 BSSC 01 02 Hold
FF2 0 BSSC 01 03 Hold
FF2 0 BSSC 01 04 HoldNot Used -- 2-38
FF2 0 BSSC 01 05 Hold (0 or 1) Hold Ring Detect Timer 0 (48ms) 2-39
FF2 0 BSSC 01 06 Hold (0 or 1) Hold Auto Answer for Outbound Calls 0 (Disabled) 2-39
FF2 0 BSSC 01 07 Hold (0 or 1) Hold Balance Control 0 (Long Loop) 2-40
FF2 0 BSSC 01 08 Hold (0 or 1) Hold Pad Control 0 (Far) 2-40
FF2 0 BSSC 01 09 Hold
FF2 0 BSSC 01 10 HoldNot Used -- 2-41
FF2 0 BSSC 01 11 Hold (1-6) Hold Ring Frequency 1 (400/562Hz) 2-41
FF2 0 BSSC 01 12 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-42
FF2 0 BSSC 01 13 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-43
FF2 0 BSSC 01 14 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-43
FF2 0 BSSC 01 15 Hold (0-3) Hold Disconnect Supervision Timer 0 (160ms) 2-44
FF2 0 BSSC 01 16 Hold  Not Used -- 2-44
FF2 0 BSSC 01 17 Hold  Not Used -- 2-44
FF2 0 BSSC 01 18 Hold (0-3) Hold Auto Answer Timer 0 (1 second) 2-45
FF2 0 BSSC 01 19 Hold Not Used -- 2-45
FF2 0 BSSC 02 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-46
FF2 0 BSSC 02 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-46
FF2 0 BSSC 02 02 Hold
FF2 0 BSSC 02 03 HoldNot Used -- 2-47
FF2 0 BSSC 02 04 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-47
FF2 0 BSSC 02 05 Hold Not Used -- 2-47
FF2 0 BSSC 02 06 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-48
FF2 0 BSSC 02 07 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-48
FF2 0 BSSC 02 08 Hold Not Used -- 2-49
FF2 0 BSSC 02 09 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-49