Panasonic Digital Imaging System Dp1810f Fax Operating Instructions

							Sending Documents
41
Memory Transmission
Basic Operations
One-Touch Dialing
One-Touch Dialing allows you to dial a full telephone number by pressing a single key. To set up the One-
Touch keys, see page 23.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
NOTE1. This feature is called Quick Memory Transmission. If you wish to store All the document(s)
into memory first before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY
XMT) to  Invalid. (See page 31)
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press   to set On.
3
Press a One-Touch key.
Ex:
(Station name)
5551234
4
The document(s) begin to store into memory with a file
number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 1)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
(Station name)
1
2ORIGINAL SIZE
M2/    MEM XMT
M2/MEM  XMT
01 
						

							Sending Documents
42
Memory Transmission
Abbreviated Dialing
Abbreviated dialing is a speedy way to dial a frequently dialed telephone number by preprogramming the
telephone number into the built-in auto-dialer with a 3-digit abbreviated code. To program an abbreviated
dialing number, see page 24.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
NOTE1. This feature is called Quick Memory Transmission. If you wish to store All the document(s)
into memory first before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY
XMT) to  Invalid. (See page 31)
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press   to set On.
3
Press   then enter a 3-digit code.
Ex:     [10] Station name
5551234
4
The document(s) begin to store into memory with a file
number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 1)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
(Station name)
1
2ORIGINAL SIZE
M2/    MEM XMT
M2/MEM  XMT
ABBR
. 
						

							Sending Documents
43
Memory Transmission
Basic Operations
Directory Search Dialing
Directory Search dialing allows you to dial a full telephone number by searching the station name entered in 
One-Touch keys or Abbreviated dialing numbers.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press   to set On.
3
 or 
Enter the full station name or part of a station name by
using the Character keys.  (See page 17) 
Ex:  for searching PANASONIC
ENTER LETTER(S)
❚
PANAFAX
9-555 1234
4
 or 
repeatedly until the display shows the station name you
want to send to.
[010] PANASONIC
5551234
1
2ORIGINAL SIZE
M2/    MEM XMT
M2/MEM  XMT
PANASET 
						

							Sending Documents
44
Memory Transmission
NOTE1. This feature is called Quick Memory Transmission. If you wish to store All the document(s)
into memory first before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY
XMT) to  Invalid. (See page 31)
5
The document(s) begin to store into memory with a file
number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 1)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
PANASONIC 
						

							Sending Documents
45
Memory Transmission
Basic Operations
Multi-Station Transmission (Broadcasting)
If you have to send the same document(s) to multiple stations, you can save time in feeding the
document(s) by using memory transmission. That is, you can store the document(s) into memory and then
send it to the station(s) automatically.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press   to set On.
3
Dial by any combination of the following methods:
 One-Touch Dialing
 Abbreviated Dialing
 Manual Number Dialing, press   after each
station is entered (up to 30 stations) 
 Directory Search Dialing, press   after each
station is entered 
(For details, see pages 39 to 43.)
Ex:
    
If you want to confirm the number of stations you have
entered, press  .
(Station name)
5551234
[10] Station name
5551234
2 STN(S) ARE SET
ADD MORE OR START
1
2ORIGINAL SIZE
M2/    MEM XMT
M2/MEM  XMT
SET
SET
01
.
SET 
						

							Sending Documents
46
Memory Transmission
NOTE1. You can review the stations you entered in Step 3 before storing your document(s) into
memory by pressing   or  . Press   to clear an entered station or group shown
on the display if needed.
2. The Quick Memory Transmission is disabled if multiple stations are set.
4
All document(s) are stored into memory with a file
number. (See Note 2)
Then starts dialing the telephone numbers in sequence.
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
* DIALING * NO.001
(Station name)
CLEAR 
						

							Sending Documents
47
Basic Operations
If your machines memory is full or you wish to send the document(s) immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
NOTE1. If you need a special access number to get an outside line, dial it first then press   to
enter a pause (represented by a -) before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press   (represented by a /).
The dialing mode will be changed from Pulse to Tone after dialing the digit /.
Ex: 9 PAUSE TONE 5551234
3 To stop the transmission, press  .
The display shows:
COMMUNICATION STOP?
1:YES 2:NO
Press   to stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.
Direct Transmission
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2 Make sure that the lamp goes off.
ENTER STATION
THEN PRESS START 00%
3
Enter a telephone number from the keypad.
Ex:
TEL. NO.
5551234
❚
4
Your machine starts dialing the telephone number.
* DIALING *
5551234
1
2ORIGINAL SIZE
M2/    MEM XMT
5551234
PAUSE
TONE
STOP
1 
						

							Sending Documents
48
Direct Transmission
One-Touch Dialing (Direct Transmission)
One-Touch Dialing allows you to dial a full telephone number by pressing a single key. To set up the One-
Touch keys, see page 23.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2 Make sure that the lamp goes off.ENTER STATION
THEN PRESS START 00%
3
Press a One-Touch key.
Ex:
The display will show the One-Touch number and station
name. The full number will then be dialed.
(Station name)
5551234
* DIALING *
(Station name)
1
2ORIGINAL SIZE
M2/    MEM XMT
01 
						

							Sending Documents
49
Direct Transmission
Basic Operations
Abbreviated Dialing (Direct Transmission)
Abbreviated dialing is a speedy way to dial a frequently dialed telephone number by preprogramming the
telephone number into the built-in auto-dialer with a 3-digit abbreviated code. To program an abbreviated
dialing number, see page 24.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2 Make sure that the lamp goes off.ENTER STATION
00%
3
Press   then enter a 3-digit code.
    
The display will show the ABBR number and station
name. 
The full number will then be dialed.[10] Station name
5551234
* DIALING *
(Station name)
1
2ORIGINAL SIZE
M2/    MEM XMT
ABBR
. 
						

							Sending Documents
50
Direct Transmission
Directory Search Dialing (Direct Transmission)
Directory Search dialing allows you to dial a full telephone number by searching the station name entered in 
One-Touch keys or Abbreviated dialing numbers.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL MODE.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
 Place a book or an original face down on the Platen Glass.
 Press   to select the original size.
2 Make sure that the lamp goes off.ENTER STATION
THEN PRESS START 00%
3
 or 
Enter the full station name or part of a station name by
using the Character keys.  (See page 17) 
Ex:  for searching PANASONIC
ENTER LETTER(S)
❚
PANAFAX
9-555 1234
4
 or 
repeatedly until the display shows the station name you
want to send to.
[010] PANASONIC
5551234
5
The full number will be dialed.
* DIALING *
PANASONIC
1
2ORIGINAL SIZE
M2/    MEM XMT
PANASET