Ricoh Mp C3000 Service Manual

							 
SM 7-1 B230/B237 
Specifications 
 
7. SPECIFICATIONS 
7.1 GENERAL SPECIFICATIONS 
7.1.1 MAIN FRAME 
Configuration: Desktop 
Print Process: Laser beam scanning & Dry elec
trostatic transfer system 
4 drums tandem method   
Number of scans:  1 
Resolution:  Scan: 600 dpi 
Print: 600 dpi 
Gradation: Scan: 8 bits/pixel 
Print: 4 bits/pixel, 2 bits/pixel, 1 bits/pixel 
Original type:  Sheets, book, objects 
Maximum original 
size: A3/11 x 17 
Original reference 
position: Left rear corner, ad hoc lists 
 
 
Copy speed: Normal (ADF 1 to 1, LT/ A4 LEF) 
B230: 25 cpm (color) or 25 cpm (black & white) 
B237: 30 cpm (color) or 30 cpm (black & white) 
OHP/Thick  
B230: 16 cpm (color/black & white) 
B237 16 cpm (color/black & white) 
First copy (normal 
mode): 
Color: 9.7 seconds or
 less (A4/LT LEF) 
Black & white: 6.7 second s or less (A4/LT LEF) 
Warm-up time: 
45 seconds or less (23°C, 50%) 
⇒ 
Rev. 03/2007 
						

							 
B230/B237 7-2  SM 
Print Paper Capacity: 
(80 g/m
2, 20 lb) Standard tray: 500 sheets x 2 
By-pass tray: 100 sheets 
Optional paper feed tray: 500 sheets x 2 
LCT: 2000 sheets 
Print Paper Size:  (Refer to
 “Supported Paper Sizes”.) 
- Minimum Maximum 
Tray 1 A4/81/2 x 11 (LEF)   
Tray 2  A5 (LEF)/ 
8.5 x 11  A3/11 x 17 
By-pass   
90 x 148 mm  305 x 458 mm/12 x 18 
Optional Tray  A5 (LEF)/ 
8.5 x 11  A3/11 x 17 
LCT 
A4/8.5 x 11 (LEF)   
Printing Paper 
Weight: Standard tray: 60 to 216 g/m
2 (16 to 57 lb.) 
Optional paper tray: 60 to 216 g/m
2 (16 to 57 lb.) 
By-pass tray: 60 to 253 g/m
2 (16 to 67 lb.) 
Duplex unit: 64 to 169 g/m
2 (17 to 45 lb.) 
Output Paper 
Capacity:  Standard exit tray: 500 sheets (face down) 
Shift tray: 250 (80 g/m
2)/125 (B4/8.5 x 14 or more) sheets   
1-bin Tray: 125 (80 g/m
2) 
500-sheet finisher: 500 sheets (80 g/m
2) 
1000-sheet finisher 250 + 1000 sheets (80 g/m
2) 
1000-sheet booklet finisher: 100 + 1000 sheets (80 g/m
2)  
Continuous copy:  Up to 999 sheets 
Arbitrary: From 25 to 400% (1% step) 
Zoom:  Fixed: 
 North America  Europe 
 25%  25%  
						

							 
SM 7-3 B230/B237 
Specifications 
 50%  50% 
 65%  61% 
 73%  71% 
 78%  82% 
 85%  87% 
 93%  93% 
 100%  100% 
 121%  115% 
 129%  122% 
 155%  141% 
 200%  200% 
 400%  400% 
Memory: Standard: 1024 MB   
Power Source:  120 V, 60 Hz: More than 12A (for North America) 
220 V – 240 V, 50/60 Hz: More than 8A (for Europe/ASIA) 
Power Consumption: 
120V 220 - 240V 
Maximum  1440 W or less  1600 W or less 
Energy Saver  7 W or less 10 W or less 
Model State  Mainframe  Complete system 
(*1) 
Standby 40dB(A)  
or Less  44dB(A)  
or Less 
C1a 
Operating  65dB(A)  
or Less  70dB(A)  
or Less 
Noise Emission: 
(Sound Power Level) 
C1b Standby  40dB(A)   44dB(A)   
						

							 
B230/B237 7-4  SM 
or Less or Less 
Operating 67dB(A)  
or Less  70dB(A)  
or Less 
(*1) The complete system consists of  mainframe, ARDF, finisher, and LCT. 
The above measurements were made in a ccordance with Ricoh standard methodology. 
Dimensions (W x D x H): 
Copier: 650 x 659 x 740 mm (25.6 x 25.9 x 29.1) 
Copier + PFU or LCT: 650 x 659 x 1000 mm (25.6 x 25.9 x 39.4) 
Weight: Less than 120 kg (265 lb.) [excluding toner] 
  
						

							 
SM 7-5 B230/B237 
Specifications 
7.2 PRINTER 
 
 
Printer Languages: PCL 6/5c   
RPCS (Refined Printing Command Stream) 
Adobe PostScript 3 (optional) 
PDF Direct (optional) 
PictBridge (optional) 
 
 
 
 
Resolution and 
Gradation: PCL 5c:   
300 x 300 dpi : Available only in B/W mode 
600 x 600 dpi : Fast (1 bit), Standard (2 bits), Fine (4 bits) 
PCL 6:   
600 x 600 dpi : Fast (1 bit), Standard (2 bits), Fine (4 bits)   
RPCS:  
300 x 300 dpi, 600 x 600 dpi, 1,800 x 600 dpi*, 2400 dpi x 600 dpi* 
*1,800 x 600 dpi = 600 x 600 dpi (2 bits) 
*2400 dpi x 600 dpi* = 600 x 600 dpi (4 bits) 
PS3:  
600 x 600 dpi : Fast (1 bit), Standard (2 bits), Fine (4 bits) 
 
 
 
 
 
Printing speed: 
B230:  
25 ppm in Plain/Middle Thick mode   
16 ppm in Thick/OHP mode 
B237:  
30 ppm in Plain/Middle Thick mode 
16 ppm in Thick/OHP mode 
Max. Paper Length 
Bypass 600 mm (23.6”), or 1260 mm (49.6”) if SP5-150 is set to 1.
NOTE
: PCL is not supported. Also, the printer driver supports up 
to 600 mm (23.6”). 
Resident Fonts:  PCL 6/5c:   
48 Intelli fonts 
10 TrueType fonts 
1 Bitmap font 
Adobe PostScript 3: 
136 fonts (24 Type 2 fonts, 112 Type 14 fonts) 
Rev. 03/2007
⇒
⇒ 
						

							 
B230/B237 7-6  SM 
 
 
 
Host Interfaces: USB 2.0: Standard 
Ethernet (100 Base-TX/10 Base-T): Standard 
IEEE1284 parallel x 1: Optional 
IEEE1394: Optional 
IEEE802.11b (Wireless LAN): Optional 
Bluetooth (Wireless): Optional 
USB Host: Optional 
Network Protocols: 
TCP/IP (IPv4, IPv6), IPX/SPX, AppleTalk (Auto Switching), SMB 
(NetBEUI, NetBIOS over TCP/IP) 
 
Rev. 03/2007
⇒  
						

							 
SM 7-7 B230/B237 
Specifications 
7.3 SCANNER 
Standard Scanner 
Resolution: Main scan/Sub scan 
600 dpi 
Available scanning 
Resolution Range: Twain Mode: 
100 to1200 dpi 
Delivery Mode: 
100/200/300/400/600 dpi   
Grayscales:  1 bit or 8 bits/pixel each for RGB 
Scanning 
Throughput  
(ARDF mode): Scan to E-mail / Folder:   
BW: 50 ppm (A4LEF / BW Text (Print) / 200dpi /Compression: On 
(MH)) 
FC: 35 ppm (A4LEF / FC Text / Photo / 200dpi / Compression: 
Standard) 
Interface: 
Ethernet (100 Base-TX/10 Base-T for TCP/IP), IEEE 1394 (IP 
Over 1394), Wireless LAN 
Compression 
Method: B&W: TIFF (MH, MR, MMR) 
Gray Scale, Full Color: JPEG 
Max. Original Length  432 mm (17”) (ARDF mode) 
 
⇒
Rev. 03/2007 
						

							 
B230/B237 7-8  SM 
7.4  SUPPORTED PAPER SIZES 
7.4.1 PAPER FEED 
BT: By-pass Tray, T1: Tray 1, T2/3/4: Tray 2/3/4, LCT: Large Capacity Tray,   
DT: Duplex Tray 
North America  Europe/Asia 
Paper Size (W x 
L) BT  T1 T2/3/4LCTBT  T1 T2/3/4  LCT 
DT 
A3 W  12 x 18  M  -  -  -  M  -  -  -  - 
A3 SEF  297 x 
420mm  M -  M  -  A  -  A  -  M 
A4 SEF  210 x 
297mm  M - A/M -  A  -  A  -  M 
A4 LEF  297 x 
210mm  M S  M  S  M A  A  A  M 
A5 SEF  148 x 
210mm  M S - - A - - - - 
A5 LEF  210 x 
148mm  M -  M  - M S  A  - M 
A6 SEF  105 x 
148mm  M - -  - A - -  - - 
B4 SEF  257 x 
364mm  M -  M  -  M -  A  -  M 
B5 SEF  182 x 
257mm  M -  M  -  M -  A  -  M 
B5 LEF  257 x 
182mm  M -  M  - M S  A  - M 
B6 SEF  128 x 
182mm  M S - - M - - - -  
						

							 
SM 7-9 B230/B237 
Specifications 
North America Europe/Asia 
Paper Size (W x 
L) BT  T1 T2/3/4LCTBT  T1 T2/3/4  LCT 
DT 
Ledger  11 x 17  A  -  A  -  M  -  M  -  M 
Letter SEF  8.5 x 11  A  -  A  -  M  -  A  -  M 
Letter LEF  11 x 8.5  M  A  A  A  M  S  M  S  M 
Legal SEF  8.5 x 14  M  -  A  -  M  -  M  -  M 
Government 
Legal SEF  8.25 x 14  M  -  M  -  M  -  M  -  M 
Half Letter 
SEF  5.5 x 8.5  A  -  -  -  M  -  -  -  - 
Executive 
SEF  7.25 x 
10.5  M - M/A -  M -  M  -  M 
Executive 
LEF  10.5 x 
7.25  M - A/M -  M -  M  -  M 
F SEF  8 x 13  M  -  M  -  M  -  M  -  M 
Foolscap 
SEF  8.5 x 13  M  -  M  -  M  -  M  -  M 
8.25 x 13  M  -  M  -  M  -  M  -  M 
11 x 15  M  -  M  -  M  -  M  -  M 
10 x 14  M  -  M  -  M  -  M  -  M 
Folio SEF 
8 x 10  M  -  M  -  M  -  M  -  M 
8K  267 x 
390mm  M -  M  -  M -  M  -  M 
16K SEF  195 x 
267mm  M -  M  -  M -  M  -  M 
16K LEF  267 x  M  -  M  -  M  -  M  -  M  
						

							 
B230/B237 7-10  SM 
North America Europe/Asia 
Paper Size (W x 
L) BT  T1 T2/3/4LCTBT  T1 T2/3/4  LCT 
DT 
195mm 
Custom    M -  M  -  M -  M  -  M 
Com10 Env.  4.125 x 
9.5  M -  -  -  M -  -  -  - 
Monarch 
Env.  3.875 x 
7.5  M -  -  -  M -  -  -  - 
C6 Env.  114 x 
162mm  M -  -  -  M -  -  -  - 
C5 Env.  162 x 
229mm  M -  -  -  M -  -  -  - 
DL Env.  110 x 
220mm  M -  -  -  M -  -  -  - 
Remarks: 
A  Supported: the sensor detects the paper size. 
M  Supported: the user specifies the paper size. 
S  Supported: depends on a technician adjustment
- Not supported 
 
7.4.2 PAPER EXIT 
1000-Sheet Booklet Finisher 
MF: Main Frame, Prf: Proof, Clr: Clear, Shf: Shift, Stp: Staple, SS: Saddle Stitch, 
2/3 P: 2/3 Holes Punch, 4 P: 4 Holes P unch, N4P: North Europe 4 Holes Punch 
1000-sheet booklet finisher 
Paper Size (W x L) MF 
Prf Clr Shf  Stp SS 2/3 P  4 P N4P  
A3 W  12 x 18  Y  Y  Y  -  -  -  Y  Y  Y