Honda Civic 5 Owners Manual

							Air flows from the centre
and corner vents in the dashboard.
Airf low is divided between
the vents in the dashboard and the
f loor vents. You can also use the MODE button
on the side panel to select the vents.
Each time you press the MODE
button, the selected mode is
highlighted on the display.
Air f lows f rom the f loor and
corner vents.
Airf low is divided between
the floor and corner vents, and the
demister vents at the base of the
windscreen.This button turns the rear window
demister of f and on (see page ).
Whenyouturnontherearwindow
demister, the heated door mirror is
also turned on automatically. This button directs the main airflow
to the windscreen for faster
def rosting. It also overrides any
mode selection you may have made.
When you select , the system
automatically switches to f resh air
mode and turns on the A/C. For
f aster def rosting, manually set the
fanspeedtohigh.Youcanalso
increase airf low to the windscreen
by closing the corner vents on the
dashboard.
When you turn of f by
pressing the button again, the
system returns to its former settings.
For your saf ety, make sure you have
a clear view through all the windows
bef ore driving.149
Climat e Cont rol Syst em
Features
Rear Window Demist er But t on Windscreen Demist er But t on
216
09/01/28 18:01:16 32SMG631_221 
						

							ÛÝ The temperatures of the driver’s side
and the passenger’s side can be
controlled independently when the
indicator in the DUAL button is on.
To adjust the driver’s side, turn the
temperature control dial on the
climate control panel. To adjust the
passenger’s side, press either side
( or ) of the temperature control
button on the f ront passenger’s door
armrest.
Push AUTO or . The selected
temperatures appear in the display
(in the side display on vehicles with
navigation system). When the
indicator in the DUAL button is off,
you can adjust both sides to the
same temperature by adjusting the
driver’s temperature control dial.
CONT INUED
Climat e Cont rol Syst em
Features
Dual Temperature Control
T emperat ure Cont rol Dials
217
Driver’s Side Passenger’s Side
09/01/28 18:01:23 32SMG631_222 
						

							ÛÝ To set the driver’s side temperature
to a different value than the
passenger’s side, press the DUAL
button, then turn the temperature
controldialonthecontrolpanel.To
set the passenger’s side to a
different value than the driver’s side,
press either side ( or ) of the
temperature control button on the
f ront passenger’s door armrest. You
can adjust the passenger’s side
without pressing the DUAL button
first.When you set the temperature to its
lower limit or its upper limit, it will be
displayed as ‘‘ ’’ or ‘‘ ’’.
Climat e Cont rol Syst em
Features218
09/01/28 18:01:27 32SMG631_223 
						

							Theclimatecontrolsystemhastwo
sensors: a sunlight sensor on top of
the dashboard, and a temperature
and humidity sensor next to the
steering column. Do not cover the
sensors or spill any liquid on them. Sunlight and T emperature
Sensors
Climat e Cont rol Syst em
Features219
SUNLIGHT SENSOR
TEMPERATURE SENSOR
09/01/28 18:01:32 32SMG631_224 
						

							The audio system is standard
equipment on some models. Read
the appropriate pages as shown
below f or the operation of the audio
system installed in your vehicle.
On vehicles without navigation
system, see page to .
On vehicles with navigation system,
see page to .
In addition to the standard audio
controls, the audio system in your
vehicle can be operated using the
voice control system. See the
navigation system manual f or
complete details.221 262
263 311
On vehicles with navigation system
Voice Control System
Audio System
Features220
Without navigation system
With navigation system
Left-hand drive model is shown.
09/01/28 18:01:40 32SMG631_225 
						

							Audio System (on vehicles without navigation system)
Features
Playing the Radio
221
SCAN BUTTON
PRESET BUTTONS
POWER/VOLUME KNOB AUTO SELECT BUTTON
TUNE KNOB
Left-hand drive model is shown.SEEK/SKIP BAR
09/01/28 18:01:46 32SMG631_226 
						

							µ
µµ
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM/FM
button. Adjust the volume by turning
the power/volume knob.
The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically.Use the TUNE knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency.
The seek f unction
searches up and down f rom the
current f requency to f ind a station
with a strong signal. To activate it,
press the or side of the
SEEK bar, then release it.The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds. You can use any of f ive methods to
f ind radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
If you do nothing, the system will
then scan f or the next strong station
andplayitfor10seconds.Whenit
plays a station you want to listen to,
press the SCAN button again. To Play the Radio To Select a Station
TUNE
SEEKSCAN
Audio System (on vehicles without navigation system)
Features222
09/01/28 18:01:54 32SMG631_227 
						

							µ µ
µ Select the desired band, AM, LW
or FM. FM1 and FM2 let you store
six f requencies each.If you are
travelling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Press the A. SEL button. You will see
A. SEL f lashing in the display, and
the system goes into scan mode f or
several seconds. The system stores
the f requencies of 6 FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed af ter
pressing a preset button if auto
select cannot f ind a strong station f or
that preset button.If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
,pressthe
A. SEL (auto select) button. This
restores the presets you originally
set. Each preset button can
store one f requency on AM or LW,
and two f requencies on FM.
Usethetune,seek,orscan
function to tune the radio to a
desired station.
Pick a preset button (1 6), and
hold it until you hear a beep.
Repeat steps 1 through 3 to store a
total of 6 stations on each AM and
LW, and 12 stations on FM. 1.
2.
3.
4.
To turn of f auto select
AUTO SELECT Preset
Audio System (on vehicles without navigation system)
Features223
09/01/29 17:56:27 32SMG631_228 
						

							With Radio Data System (RDS)
Audio System (on vehicles without navigation system)
Features224
POWER/VOLUME KNOBPRESET BUTTONS
TUNE KNOB TA/PTY BUTTON
Left-hand drive model is shown.
09/01/28 18:02:09 32SMG631_229 
						

							µ
µ
µ µ Alternative f requency f unction on or
of f
Regional programme on or of f
Automatic traf f ic program on or of f
News programme on or of f Program service f unction on or of f
The RDS f unctions turns on
automatically when you turn the
system on. If the station you are
listening to is an RDS stations, the
f requency is displayed in the
information display and the station
name will be displayed in the audio
display. Then, the system will
automatically keep selecting the
f requency with the strongest signal
f rom the f requencies that carry the
same programs. This can save you
the trouble of retuning to obtain thesamestationaslongasyouareinthe
same RDS network area.
You can turn on or of f the RDS
f unction and select the RDS
programmes. To switch the f unction
and select the programme, press the
power/volume knob f or more than 2
seconds with the audio system on.
You will hear a beep. Press any of
the preset buttons (1 through 6) to
select the function. Each preset
button has the f ollowing f unction.
Pressing the preset button switches
the function between on and off (24
H and 12H on the clock mode). With the FM band selected, you can
keep listening to the same station
even if its f requency changes as you
enter dif f erent regions while you are
travelling. With your audio system, you can
utilize many convenient f eatures
provided by the radio data system
(RDS).
CONT INUED
On some countries
Radio Data System (RDS) Preset 1: AF ON/OFF
Preset 2: REG ON/OFF
Preset 4 A -T P ON/OFF:
Preset 5: NEWS ON/OFF
Preset 6: CL OCK 24H/12H Preset 3: PS ON/OFF
Audio System (on vehicles without navigation system)
Features225
09/01/28 18:02:18 32SMG631_230