Honda Civic 5 Owners Manual

							To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, or 11.
To skip a voice prompt, press the
Talk button while the HFT system
is speaking. The HFT system will
then begin listening f or your next
command. If the HFT system does not
recognize a command, its
response is, ‘‘Pardon.’’ If it doesn’t
recognize the command a second
time, its response is, ‘‘Please
repeat.’’ If it doesn’t recognize the
command a third time, it plays the
Help prompt.To hear a list of available options
at any time, press the Talk button,
wait f or the beep, and say, ‘‘Hands
f ree help.’’
Many commands can be spoken
together. For example, you can
say, ‘‘Dial 123-456-7891.’’
Hands-Free T elephone (HFT ) System (For some types)
Features336
09/01/28 18:17:38 32SMG631_341 
						

							The incoming notif ication of the
HFT system can be set to a ring tone,
a prompt, or no notification.
Press and release the Talk button.
Af ter the beep, say ‘‘System.’’ The
HFT system response is, ‘‘System
options are setup and clear.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Setup.’’ The
HFT system response is ‘‘Would
you like an audible notif ication of
an incoming call?’’ To go back one step in a command
process, say, ‘‘Go back,’’ or press
the Back button.
If nothing is said while the HFT
system is listening f or a command,
the HFT system will time out and
stop its voice recognition. The
next time you press the Talk
button, the HFT system begins
listening f rom the point at which it
timed out.
To end a command sequence at
any time, press and hold the Back
button, or press and release the
Talk button, wait f or the beep, and
say, ‘‘Cancel.’’ The next time you
press the Talk button, the HFT
system begins f rom its main menu.When you f inish a command
sequence, the HFT system goes
back to its main menu. For
example, when you store the name,
‘‘Eric,’’ the HFT system response
is, ‘‘Eric has been stored.’’ The
next time you press the Talk
button, you will be at the main
menu.1.
2.
To set up the system, do this:
CONT INUED
Setting Up the System
Hands-Free T elephone (HFT ) System (For some types)
Features337
09/01/28 18:17:46 32SMG631_342 
						

							Press and release the Talk button.
If you say ‘‘Yes’’ af ter the beep, the
HFT system response is, ‘‘Would
you like the notification to be a
ring tone or a prompt?’’ If you say
‘‘No’’ af ter the beep, the HFT
system returns to its main menu.
Saying ‘‘No’’ will result in no ring
tone or prompt playback during an
incoming call. The audio system
will still be mute, and a message
will be displayed.
Press and release the Talk button.
Af ter the beep, say ‘‘Ring tone’’ or
‘‘Prompt.’’ The HFT system
response is ‘‘A ring tone will be
used.’’ or ‘‘An incoming call
prompt will be used.’’Press and release the Talk button.
If you say ‘‘No’’ af ter the beep, the
HFT system response is, ‘‘Security
willnotbeused.Thesystemsetup
is complete.’’
If you say ‘‘Yes,’’ you can set your
passcode. Ref er to the setting
procedure in the next column. If you choose ‘‘Ring tone,’’ you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ‘‘Prompt,’’ you
will hear this message to
announce an incoming call: ‘‘You
have an incoming call.’’
The HFT system response
continues ‘‘A security option is
available to lock the hands f ree
system. Each time the vehicle is
turned on, a password would be
required to use this system. Would
you like this security option turned
on?’’ 3.
4.5.6.
Hands-Free T elephone (HFT ) System (For some types)
Features338
09/01/28 18:17:53 32SMG631_343 
						

							The HFT system will accept a
numeric, f our-digit password that
you can use f or security purposes.
Follow the system setup
procedure f rom the step 1 through
the step 5 as described previously.
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
The HFT system response is
‘‘What is the f our-digit number you
would like to set as your
password?’’Press and release the Talk button.
Af ter the beep, say the f our-digit
password you want to use. For
example,say‘‘1,2,3,4.’’TheHFT
systemresponseis‘‘1,2,3,4.Is
this correct?’’Once a password is set, you can lock
the HFT system so it only operates
af ter the password is entered.
The HFT system will prompt you
foryourpasswordeachtimethe
ignition switch is turned to the ON
(II) position and you press the
Talk button. You will only be
asked f or the password once per
ignition cycle. If the password is
set, its response is ‘‘The system is
locked. What is the f our-digit
password?’’ Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ The
HFT system response is ‘‘The
system is now locked. Each time
the vehicle is turned on, the
password will be required to use
the system. The system setup is
complete. Returning to the main
menu.’’
Press and release the Talk button.
If you say ‘‘No’’ af ter the beep, the
HFT system response is, ‘‘Security
will not be used. The system setup
is complete.’’ 1.
2.
3.4.
5.1.
6.
To set your password, do this:To enter your password, do this:
CONT INUED
Setting Your Password
Hands-Free T elephone (HFT ) System (For some types)
Features339
09/01/28 18:18:03 32SMG631_344 
						

							Press and release the Talk button.
Af ter the beep, say your f our-digit
password. For example, say ‘‘1, 2,
3, 4.’’
If the password is correct, the
HFT system response is ‘‘Main
menu.’’
If the password is not correct, the
HFTsystemresponseis‘‘1,2,3,4is
incorrect. Please try again.’’ Go back
to step 2.
If you f orget your password and you
cannot activate the HFT system,
consult your dealer to cancel the
password.Your Bluetooth compatible phone
with Hands Free Prof ile must be
paired to the HFT system bef ore you
can make and receive hands-f ree
calls.HFT system does not allow you to
pair your phone if the vehicle is
moving.
During the pairing process, turn
of f any previously paired phones
bef ore pairing a new phone. The f ollowing procedure works f or
most phones. If you cannot pair
your phone to the HFT system
with this procedure, ref er to your
phone’s operating manual, or talk
to your phone retailer. Up to six phones can be paired to
the HFT system. For pairing, your phone must be in
its Discovery mode. 2.
3.Pairing Your Phone NOT E:
Hands-Free T elephone (HFT ) System (For some types)
Features340
09/01/28 18:18:12 32SMG631_345 
						

							With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Phone setup.’’ The HFT system
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Pair.’’ The
HFT system response is ‘‘The
pairing process requires operation
of your mobile phone. For saf ety,
only perf orm this f unction while
the vehicle is stopped. State a f our-
digit code f or pairing. Note this
code. It will be requested by the
phone.’’Follow the prompts on your phone
to get it into its Search mode. The
phone will search f or the HFT
system. When it comes up, select
Hands-Free Telephone System
f rom the list of options displayed
on your phone.
When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFT system
response is ‘‘A new phone has
been f ound. What would you like
to name this phone?’’ Press and release the Talk button.
Af ter the beep, say the f our-digit
code you want to use. For example,
say‘‘1,2,3,4.’’TheHFTsystem
responseis,‘‘1,2,3,4.Isthis
correct?’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ The
HFT system response is
‘‘Searching f or a Bluetooth phone.
Make sure the phone you are
trying to pair is in discovery mode.’’
Steps 5 and 6 show a
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, ref er to the
phone’s operating manual. 1.
2.3.
4.5.
6.
CONT INUED
Hands-Free T elephone (HFT ) System (For some types)
Features341
NOTE:
09/01/28 18:18:19 32SMG631_346 
						

							Press and release the Talk button.
Af ter the beep, say the new name
of the phone. For example, say
‘‘Lisa’s phone.’’ The HFT system
response is, ‘‘The name has been
changed. Returning to the main
menu.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is
‘‘Phone setup options are status,
pair, edit, delete, and list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Edit.’’ The
HFT system response is ‘‘Which
phone would you like to edit?’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to rename.
For example, say ‘‘Eric’s phone.’’
The HFT system response is
‘‘What is the new name f or Eric’s
phone?’’ Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
‘‘Eric’s phone.’’ The HFT system
response is ‘‘Eric’s phone has been
successf ully paired. Returning to
the main menu.’’
If you want to pair another phone,
repeat steps 1 through 7.1.
2.
3.4. 7.
8.To rename a paired phone, do this:
Hands-Free T elephone (HFT ) System (For some types)
Features342
09/01/28 18:18:27 32SMG631_347 
						

							To delete a paired phone, do this: To list all paired phones, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is,
‘‘Phone setup options are status,
pair, edit, delete, and list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Delete.’’ The
HFT system response is, ‘‘Which
phone would you like to delete?’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to delete. For
example say ‘‘Eric’s phone.’’ The
HFT system response is ‘‘Would
you like to delete Eric’s phone?’’Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ The
HFT system response is
‘‘Preparing to delete Eric’s phone.’’
Say ‘‘OK’’ to continue. Otherwise,
say ‘‘Go back,’’ or ‘‘Cancel.’’
Press and release the Talk button.
If you say ‘‘OK’’ af ter the beep, the
HFT system response is ‘‘The
phone has been deleted. Returning
to the main menu.’’ If you say ‘‘Go
back,’’ or ‘‘Cancel,’’ the phone will
not be deleted.Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is
‘‘Phone setup options are status,
pair, edit, delete, and list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘List.’’ The
HFT system responds by listing
the name of each paired phone.
When all phones paired to the
system have been read, the HFT
system response is ‘‘The entire list
has been read. Returning to the
main menu.’’ 1.
2.
3.4.
5.1.
2.
CONT INUED
Hands-Free T elephone (HFT ) System (For some types)
Features343
09/01/28 18:18:35 32SMG631_348 
						

							To f ind out the status of the phone being
used, do this:To change f rom the currently linked
phone to another paired phone, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is
‘‘Phone setup options are status,
pair, edit, delete, and list.’’Press and release the Talk button.
Af ter the beep, say ‘‘Next phone.’’
The HFT system response is
‘‘Searching f or the next phone.’’
The HFT system then disconnects
thelinkedphoneandsearchesfor
another paired phone. If no other
phones are f ound, the f irst phone
remains linked.You can make calls using any phone
number, or by using a name in the
HFT system phonebook. You can
also redial the last number called.
During a call, the HFT system allows
youtotalkupto30minutesafteryou
remove the key from the ignition
switch. Continuing a call without
running the engine may discharge
and weaken the vehicle’s battery.
You can also dial by operating the
number keys on your phone directly
(see page ). Press and release the Talk button.
After the beep, say ‘‘Status.’’ An
example of the HFT system
response is, ‘‘Eric’s phone is linked.
Battery strength is three bars.
Signal strength is f ive bars, and
the phone is roaming. Returning to
the main menu.’’
Some phones do not send the
status information to the HFT
system. 1.
2.1.
347 Making a Call
Hands-Free T elephone (HFT ) System (For some types)
Features344
09/01/28 18:18:43 32SMG631_349 
						

							To make a call using a name in the HFT
system phonebook, do this: To make a call using a phone number,
do this:
On vehicles with navigation system
With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’ The HFT system
response is, ‘‘What name or
number would you like to call/
dial?’’
Press and release the Talk button.
After the beep, say the name you
want to call. For example, say
‘‘Eric.’’ The HFT system response
is ‘‘Would you like to call Eric?’’ With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’ The HFT system
response is, ‘‘What name or
number would you like to call/
dial?’’
Press and release the Talk button.
Af ter the beep, say the number
you want to call. For example, say
‘‘123 456 7891.’’ The HFT system
response is ‘‘123 456 7891. Say call,
dial, or continue to add numbers.’’Press and release the Talk button.
Af ter the beep, say ‘‘Call’’ or ‘‘Dial.’’
The HFT system response is
‘‘Calling’’ or ‘‘Dialing.’’ Once
connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob, or the steering
wheel volume controls.
You can also make a call directly
f rom the list shown on the
navigation display.To end the call, press the Back
button. 1.1.
2.3.
4.
2.
CONT INUED
Hands-Free T elephone (HFT ) System (For some types)
Features345
09/01/28 18:18:51 32SMG631_350