Canon printer MAXIFY MB2320 User Manual

							Inserting the USB Flash DrivePrintable Image Data•
This machine accepts images taken with a camera compliant with the Design rule for Camera Filesystem (Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). Other image or movie types
such as RAW images cannot be printed.
•
The machine accepts images scanned and saved with the machine when  Doc.type is set to Photo
and  Format  is set to  JPEG (file extension ".jpg").
Note
•
This device incorporates exFAT technology licensed from Microsoft.
•
If your USB flash drive cannot be inserted into the USB flash drive port of the machine, you may be
required to use an extension cable for the USB flash drive. Purchase it at electronics retail stores.
•
Some USB flash drives may have recognition problem, and these devices may not guarantee proper operation of the machine.
•
You may not be able to use USB flash drives with security function.
1.
Insert the USB flash drive into the USB flash drive port.
Make sure that the USB flash drive is correctly oriented before inserting it straightforward into the USB
flash drive port.
191 
						

							Removing the USB Flash Drive1.
Make sure that the machine is not reading or writing data from/to the USB flash drive.
A message is displayed on the touch screen during such operations.
Important
•
Do not remove the USB flash drive or turn off the power while the machine is reading or writing data from/to it.
Note
•
If your USB flash drive has the access lamp, refer to the instruction manual supplied with the USBflash drive to check if the reading or writing operation is completed on the USB flash drive.
2.
Remove the USB flash drive.
Hold the USB flash drive and remove it straightforward from the machine.
192 
						

							Replacing an Ink Tank
Replacing an Ink Tank
Checking the Ink Status
193 
						

							Replacing an Ink TankWhen remaining ink cautions or errors occur, the message will appear on the touch screen to inform you ofthe error. Take appropriate action according to the message.
A Message Is Displayed
Note
•
If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance
Procedure .
Replacing Procedure
When you need to replace an ink tank, follow the procedure below.
Important
•
If you remove an ink tank, replace it immediately. Do not leave the machine with the ink tank removed.
•
Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the ink
tank properly.
•
Once an ink tank has been installed, do not remove it from the machine and leave it out in the open. This will cause the ink tank to dry out, and the machine may not operate properly when it is
reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use.
Note
•
Color ink may be consumed even when printing a black-and-white document or when black-and- white printing is specified.
Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may
be necessary to maintain the performance of the machine. When an ink tank is out of ink, replace it
immediately with a new one.
Useful Information about Ink
1.
Make sure that the power is turned on, then open the front cover.
The replaceable ink tank is displayed on the touch screen and the print head holder (A) moves to the
replacement position of that ink tank.
194 
						

							Caution
•
Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holderuntil it stops completely.
Important
•
Do not remove an ink tank until a new one is prepared to be installed.
•
Once you remove an ink tank, the machine will not operate until a new one is installed.
•
Once you remove an ink tank, the machine will not operate even if the removed ink tank is
just reinstalled.
•
You cannot remove the ink tank which is not placed at the replacement position. Removing it
forcibly may cause the machine to malfunction or damage the machine.
•
Do not touch the metallic parts or other parts inside the machine.
•
If the front cover is left open for more than 60 minutes, the print head holder moves to the right.
In this case, close and reopen the front cover.
Note
•
If the message for the ink tank replacement is displayed on the touch screen, check it and then tap  OK.
2.
When an ink tank for replacement is displayed on the touch screen, push up the ink tank
eject lever (B).
The ink tank will be ejected.
When you want to replace another ink tank, tap  Next to display the screen for the ink tank to replace.
195 
						

							Important
•
Place the removed ink tank into a plastic bag immediately after removing from the machine.
Otherwise, ink residue may stain your clothes or the surrounding area.
•
Do not touch other parts besides the ink tanks.
•
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
•
Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.
3.
Remove the ink tank from the package.
Important
•
Do not touch the contact (C) and joint (D) of the ink tank.
4.
Insert a new ink tank aligning it with the installation guide (E) of the machine.
196 
						

							Important
•
You cannot insert the ink tank in the wrong position. Check the label under the installation
position, then install the ink tank in the correct position.
5.
Push the ink tank until it snaps firmly into place.
6.
Tap  Exit on the touch screen.
If  Next  is displayed on the screen, it means there is another ink tank that can be replaced.
If you want to replace this ink tank, tap  Next and then repeat procedures from step 2.
To exit the ink tank replacement, tap  Next until  Exit is displayed on the screen.
The print head holder moves to the standby position. You cannot remove the ink tank while at this
position.
197 
						

							Important
•
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
•
An installed ink tank cannot be removed until the message to replace it is displayed.
7.
Close the front cover.
After replacing the ink tanks, the machine starts mixing the ink automatically. Wait until the machinehas stopped making operating noise. (This takes about 1 to 2 minutes.)
Note
•
If the error message appears on the touch screen, take appropriate action.
A Message Is Displayed
•
If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar
symptoms, 
align the print head .
•
The machine may make noise during operation.
198 
						

							Checking the Ink Status
Checking the Ink Status with the Touch Screen on the Machine
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
199 
						

							Checking the Ink Status with the Touch Screen on the Machine1.
Make sure that the power is turned on, and display the HOME screen.
If the HOME screen is not displayed, press the  HOME button to display it.
2.
Tap  on the HOME screen.
Using the Operation Panel
A symbol appears in the area (A) if there is any information about the remaining ink level.
Example: 
Ink tank is running low. Prepare a new ink tank.
Note
•
The above screen shows estimated ink levels.
•
The  Current estimated ink levels  screen can also be displayed by tapping  Setup in the HOME
screen and selecting  Estimated ink levels  in the setup menu.
•
Tap Ink number  to display and print the model number of the ink tank.
•
You can also check the ink status on a screen of the touch screen displayed while printing.
•
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
200